Investigation of the in-vitro loading on an artificial spinal disk prosthesis

Spinal diseases imposes considerable burden to both patients and society. In recent years, much surgical efforts have been made in advancing the treatment of neck and back pain. Of particular prominence is the increasing clinical acceptance and use of intervertebral artificial disk prosthesis for the treatment of discogenic back pain. Despite this increased use of such disks, their in-vivo monitoring remains rudimentary. In an effort to develop an intelligent artificial spinal disk where the in-vivo loading of the spine can by studied for the first time an experimental set up has been created in order to initially study the in-vitro loading on an artificial disc prosthesis. Eight strain gauges and two piezoresistive sensors were used and placed suitably in the artificial disk prosthesis. The results from the in-vitro loading showed linear relationship between loading and the outputs from the sensors with good repeatability and less hysteresis

On the experimental intradiscal pressure measurement techniques : a review

Series : Mechanisms and machine science, ISSN 2211-0984, vol. 24The intradiscal pressure has been essential for prevent the spinal complaints by forming a basis for clinical advice to promote the correct sitting postures. As a consequence, it is evident the need of an accurate method for measure the intradiscal pressure, to better understand the disc response to hydorstatic pressure fluctuations. Numerous reviews regarding disc mechanics are available, including intradiscal pressure benchmarks; however, an analysis on the techniques of intradiscal pressure measurement is needed. Therefore, this review will remain focused on the methodologies adopted for measure the intradiscal pressure in several conditions: for different daily activities, under external loads and for values where occurs annulus fibrosus disruption. The importance of the intradiscal pressure on disc function will be discussed as well as the some guidelines for design new measurement techniques will be defined

The Virtual-Spine Platform—Acquiring, visualizing, and analyzing individual sitting behavior

Back pain is a serious medical problem especially for those people sitting over long periods during their daily work. Here we present a system to help users monitoring and examining their sitting behavior. The Virtual-Spine Platform (VSP) is an integrated system consisting of a real-time body position monitoring module and a data visualization module to provide individualized, immediate, and accurate sitting behavior support. It provides a comprehensive spine movement analysis as well as accumulated data visualization to demonstrate behavior patterns within a certain period. The two modules are discussed in detail focusing on the design of the VSP system with adequate capacity for continuous monitoring and a web-based interactive data analysis method to visualize and compare the sitting behavior of different persons. The data was collected in an experiment with a small group of subjects. Using this method, the behavior of five subjects was evaluated over a working day, enabling inferences and suggestions for sitting improvements. The results from the accumulated data module were used to elucidate the basic function of body position recognition of the VSP. Finally, an expert user study was conducted to evaluate VSP and support future developments

Consultations with complementary and alternative medicine practitioners amongst wider care options for back pain: a study of a nationally representative sample of 1,310 Australian women aged 60–65 years

Back pain is a significant health service issue in Australia and internationally. Back pain sufferers can draw upon a range of health care providers including complementary and alternative medicine (CAM) practitioners. Women are higher users of health services than men and tend to use CAM frequently for musculoskeletal conditions. However, there remain important gaps in our understanding of women's consultation patterns with CAM practitioners for back pain. The objective of this study is to examine the prevalence of use and characteristics of women who use CAM practitioners for back pain. The method used was a survey of a nationally representative sample of women aged 60-65 years from the Australian Longitudinal Study on Women's Health. Women consulted a massage therapist (44.1 %, n = 578) and a chiropractor (37.3 %, n = 488) more than other CAM practitioners for their back pain. Consultations with a chiropractor for back pain were lower for women who consulted a General Practitioner (GP) (OR, 0.56; 95 % CI 0.41, 0.76) or a physiotherapist (OR, 0.53; 95 % CI 0.39, 0.72) than for those who did not consult a GP or a physiotherapist. CAM practitioner consultations for back pain were greater for women who visited a pharmacist (OR, 1.99; 95 % CI 1.23, 3.32) than for women who did not visit a pharmacist. There is substantial use of CAM practitioners alongside conventional practitioners amongst women for back pain, and there is a need to provide detailed examination of the communication between patients and their providers as well as across the diverse range of health professionals involved in back pain care

Symptom increase following a functional capacity evaluation in patients with chronic low back pain:An explorative study of safety

Introduction: This study was performed to study intensity and duration of symptom increase following an FCE and to explore safety of an FCE. Methods: Included were 92 patients with chronic low back pain (CLBP), mean age 38.5 years, mean self-reported disability 12.5 (Roland Morris Disability Questionnaire). All patients underwent an FCE. Symptom increase was measured with a 2-item questionnaire. Operational definition for safety: no formal complaint filed and symptom increase to occur only temporarily. Results: No formal complaints were filed (n=92). In total, 54 patients returned the questionnaire (59%; 'responders'). Of the responders, 76% reported increased symptom intensity after an FCE, ranging from 'little increase' to 'severe increase'. Symptoms of all responders returned to pre-FCE level. Duration of symptom increase of the responders ranged from 1 day to 3 weeks. Symptom increase resided to pre-FCE level within 1 week in 93% of the responders. Symptom increase was weakly related to self-reported disability (r=0.38, p <0.05). Except for gender, differences between responders and non-responders were non-significant. Conclusion: A temporary increase in symptom intensity following an FCE is common. Within the operational definitions of safety used in this study, assessment of functional capacity of patients with CLBP appears safe

Оцінка оновлення основних засобів за рахунок позикових коштів

Оновлення основних засобів є актуальною проблемою сьогодення. Для багатьох підприємств кредити банків є чи не єдиним джерелом коштів на модернізацію виробничих потужностей. В даній статті нами були розглянуті можливості і перспективи приватних фірм для використання з цією метою позикових засобів, оцінений ступінь прозорості банківських установ, річні ставки за інвестиційними кредитами та інші умови їхнього надання.Modernizing of the basic assets is a topical problem of the present. For many business firms bank loans are may be the only source of funds for renewal of production facilities. In the article we have considered the opportunities and prospects for use of borrowed funds by private firms for this purpose, rated the degree of transparency of banking institutions, the annual rates of investment credits and other conditions of their granting

Biomechanical analysis of the lumbar spine on facet joint force and intradiscal pressure - a finite element study

<p>Abstract</p> <p>Background</p> <p>Finite element analysis results will show significant differences if the model used is performed under various material properties, geometries, loading modes or other conditions. This study adopted an FE model, taking into account the possible asymmetry inherently existing in the spine with respect to the sagittal plane, with a more geometrically realistic outline to analyze and compare the biomechanical behaviour of the lumbar spine with regard to the facet force and intradiscal pressure, which are associated with low back pain symptoms and other spinal disorders. Dealing carefully with the contact surfaces of the facet joints at various levels of the lumbar spine can potentially help us further ascertain physiological behaviour concerning the frictional effects of facet joints under separate loadings or the responses to the compressive loads in the discs.</p> <p>Methods</p> <p>A lumbar spine model was constructed from processes including smoothing the bony outline of each scan image, stacking the boundary lines into a smooth surface model, and subsequent further processing in order to conform with the purpose of effective finite element analysis performance. For simplicity, most spinal components were modelled as isotropic and linear materials with the exception of spinal ligaments (bilinear). The contact behaviour of the facet joints and changes of the intradiscal pressure with different postures were analyzed.</p> <p>Results</p> <p>The results revealed that asymmetric responses of the facet joint forces exist in various postures and that such effect is amplified with larger loadings. In axial rotation, the facet joint forces were relatively larger in the contralateral facet joints than in the ipsilateral ones at the same level. Although the effect of the preloads on facet joint forces was not apparent, intradiscal pressure did increase with preload, and its magnitude increased more markedly in flexion than in extension and axial rotation.</p> <p>Conclusions</p> <p>Disc pressures showed a significant increase with preload and changed more noticeably in flexion than in extension or in axial rotation. Compared with the applied preloads, the postures played a more important role, especially in axial rotation; the facet joint forces were increased in the contralateral facet joints as compared to the ipsilateral ones at the same level of the lumbar spine.</p

Delineating inflammatory and mechanical sub-types of low back pain: a pilot survey of fifty low back pain patients in a chiropractic setting

Background An instrument known as the Mechanical and Inflammatory Low Back Pain (MAIL) Scale was drafted using the results of a previous expert opinion study. A pilot survey was conducted to test the feasibility of a larger study designed to determine the MAIL Scale's ability to distinguish two potential subgroups of low back pain: inflammatory and mechanical. Methods Patients with a primary complaint of low back pain (LBP) presenting to chiropractic clinics in Perth, Western Australia were asked to fill out the MAIL Scale questionnaire. The instrument's ability to separate patients into inflammatory and mechanical subgroups of LBP was examined using the mean score of each notional subgroup as an arbitrary cut-off point. Results Data were collected from 50 patients. The MAIL Scale did not appear to separate cases of LBP into the two notionally distinct groups of inflammatory (n = 6) or mechanical (n = 5). A larger "mixed symptom" group (n = 39) was revealed. Conclusions In this pilot study the MAIL Scale was unable to clearly discriminate between what is thought to be mechanical and inflammatory LBP in 50 cases seen in a chiropractic setting. However, the small sample size means any conclusions must be viewed with caution. Further research within a larger study population may be warranted and feasible