The prospects for composites based on boron fibers

The fabrication of boron filaments and the production of composite materials consisting of boron filaments and organic or metallic matrices are discussed. Problem involving the use of tungsten substrates in the filament fabrication process, the protection of boron fibers with diffusion barrier cladings, and the application of alloy additives in the matrix to lessen the effects of diffusion are considered. Data on the kinetics of the boron fiber/matrix interaction at high temperatures, and the influence of the fiber/matrix interaction on the mechanical properties of the composite are presented

Theoretical study of metal borides stability

We have recently identified metal-sandwich (MS) crystal structures and shown with ab initio calculations that the MS lithium monoboride phases are favored over the known stoichiometric ones under hydrostatic pressure [Phys. Rev. B 73, 180501(R) (2006)]. According to previous studies synthesized lithium monoboride tends to be boron-deficient, however the mechanism leading to this phenomenon is not fully understood. We propose a simple model that explains the experimentally observed off-stoichiometry and show that compared to such boron-deficient phases the MS-LiB compounds still have lower formation enthalpy under high pressures. We also investigate stability of MS phases for a large class of metal borides. Our ab initio results suggest that MS noble metal borides are less unstable than the corresponding AlB$_2$-type phases but not stable enough to form under equilibrium conditions.Comment: 14 pages, 15 figure

New heat treatment to prepare high quality polycrystalline and single crystal MgB2 in single process

We report here on a new heat treatment to prepare both dense polycrystalline and single crystal MgB2 high quality samples in one single process. Resistivity measurements for polycrystalline part of the sample gives a residual resistivity ratio RRR=16.6 and a very low normal state resistivity rho(40K)= 0.28 microOhmcm. Both SEM and SQUID study on polycrystals reveal the high quality, dense character and well coupling of grain boundaries. On the other hand, the high quality single crystals have a unique shape that resembles the hexagonal crystal structure. SQUID measurements reveals very weak flux pinning character implying our single crystals to be very clean. In this study, we conclude that heat treatment is playing a major rule on the characteristics of both polycrystalline and single crystal MgB2. Samples are thoroughly characterized by x-ray, resistivity, dc SQUID and SEM

Multiscale structure of sheet nacre.

This work was conducted on Pinctada maxima nacre (mother of pearl) in order to understand its multiscale ordering and the role of the organic matrix in its structure. Intermittent-contact atomic force microscopy with phase detection imaging reveals a nanostructure within the tablet. A continuous organic framework divides each tablet into nanograins. Their shape is supposed to be flat with a mean extension of 45 nm. TEM performed in the darkfield mode evidences that at least part of the intracrystalline matrix is crystallized and responds like a ‘single crystal'. The tablet is a ‘hybrid composite'. The organic matrix is continuous. The mineral phase is thus finely divided still behaving as a single crystal. It is proposed that each tablet results from the coherent aggregation of nanograins keeping strictly the same crystallographic orientation thanks to a hetero-epitaxy mechanism. Finally, high-resolution TEM performed on bridges from one tablet to the next, in the overlying row, did not permit to evidence a mineral lattice but crystallized organic bridges. The same organic bridges were evidenced by SEM in the interlaminar sequence

Synthesis and Stoichiometry of MgB2

The system MgxB2 has been investigated to investigate possible nonstoichiometry in MgB2. When synthesized at 850oC, MgB2 is a line compound with a possible Mg vacancy content of about 1%. Small changes in lattice constants as a function of starting composition result from grain interaction stresses, whose character is different in the Mg-rich, near-stoichiometric, and Mg-deficient regimes. A small linear decrease of the superconducting transition temperature, Tc, in the Mg-rich regime results from accidental impurity doping.Comment: Accepted for publication in Physica C. 24 pages, 7 figure

Sheet nacre growth mechanism: a Voronoi model.

Xavier Bourrat is in ISTO's lab since January 2005International audienceShell nacre (mother of pearl) of Pinctada margaritifera was analyzed by scanning electron microscopy. The originality of this work concerns the sampling performed to observe incipient nacre on the mantle side. The whole animal is embedded in methyl methacrylate followed by separation of the shell from the hardened mantle. It is revealed this way how each future nacre layer pre-exists as a film or compartment. Experimental observations also show for the first time, the progressive lateral crystallization inside this film, finishing under the form of a non-periodic pattern of polygonal tablets of bio-aragonite. It is evidenced that nuclei appear in the film in the vicinity of the zone where aragonite tablets of the underlying layer get in contact to each other. A possible explanation is given to show how nucleation is probably launched in time and space by a signal coming from the underlying layer. Finally, it is evidenced that tablets form a Voronoi tiling of the space: this suggests that their growth is controlled by an "aggregation-like" process of "crystallites" and not directly by the aragonite lattice growth

Fifteen days of 3200m simulated hypoxia marginally regulates markers for protein synthesis and degradation in human skeletal muscle

Chronic hypoxia leads to muscle atrophy. The molecular mechanisms responsible for this phenomenon are not well defined in vivo. We sought to determine how chronic hypoxia regulates molecular markers of protein synthesis and degradation in human skeletal muscle and whether these regulations were related to the regulation of the hypoxia-inducible factor (HIF) pathway. Eight young male subjects lived in a normobaric hypoxic hotel (FiO2 14.1%, 3,200 m) for 15 days in well-controlled conditions for nutrition and physical activity. Skeletal muscle biopsies were obtained in the musculus vastus lateralis before (PRE) and immediately after (POST) hypoxic exposure. Intramuscular hypoxia-inducible factor-1 alpha (HIF-1α) protein expression decreased (-49%, P=0.03), whereas hypoxia-inducible factor-2 alpha (HIF-2α) remained unaffected from PRE to POST hypoxic exposure. Also, downstream HIF-1α target genes VEGF-A (-66%, P=0.006) and BNIP3 (-24%, P=0.002) were downregulated, and a tendency was measured for neural precursor cell expressed, developmentally Nedd4 (-47%, P=0.07), suggesting lowered HIF-1α transcriptional activity after 15 days of exposure to environmental hypoxia. No difference was found on microtubule-associated protein 1 light chain 3 type II/I (LC3b-II/I) ratio, and P62 protein expression tended to increase (+45%, P=0.07) compared to PRE exposure levels, suggesting that autophagy was not modulated after chronic hypoxia. The mammalian target of rapamycin complex 1 pathway was not altered as Akt, mammalian target of rapamycin, S6 kinase 1, and 4E-binding protein 1 phosphorylation did not change between PRE and POST. Finally, myofiber cross-sectional area was unchanged between PRE and POST. In summary, our data indicate that moderate chronic hypoxia differentially regulates HIF-1α and HIF-2α, marginally affects markers of protein degradation, and does not modify markers of protein synthesis or myofiber cross-sectional area in human skeletal muscle

Oxidation behaviour of SiC/SiC ceramic matrix composites in air

Oxidation of silicon melt infiltrated SiC/SiC ceramic matrix composites (CMC) was studied in air at 1200–1400 °C for 1, 5, 24 and 48 h. Weight gain and oxide layer thickness measurements revealed the oxidation follows parabolic reaction kinetics with increase in temperature and time. XRD showed the extent of oxide layer (SiO2) formation was greatest after 48 h at 1400 °C: an observation confirmed by X-ray photoelectron spectroscopy (XPS), energy dispersive spectroscopy (EDS) and transmission electron microscopy (TEM) analyses. Oxide layer thickness varied from 1 μm after 48 h at 1200 °C to 8 μm after 48 h at 1400 °C. Oxidation of SiC/SiC composites is both temperature and time dependent with an activation energy of 619 kJ mol−1. BN coatings around SiC fibres showed good resistance to oxidation even after 48 h at 1400 °C

Chemical Vapor Infiltration Process Modeling and Optimization

Chemical vapor infiltration is a unique method for preparing continuous fiber ceramic composites that spares the strong but relatively fragile fibers from damaging thermal, mechanical, and chemical degradation. The process is relatively complex and modeling requires detailed phenomenological knowledge of the chemical kinetics and mass and heat transport. An overview of some of the current understanding and modeling of CVI and examples of efforts to optimize the processes is given. Finally, recent efforts to scale-up the process to produce tubular forms are described

Periodic and disordered polytypes of SiC: A dynamic model based on local deformations

International audienceSilicon carbide exists under a great variety of polytypes that can be described by a sequence of orientations of diatomic Si-C layers in a stacking direction. A dynamical model is proposed for the formation of polytypes during the layer-by-layer growth of the material that occurs in CVD/CVI. A recurrence law is determined for the sequence of layer deformations ; the orientation sequence is derived from it. The evolution of this law allows one to reproduce qualitatively the whole polytypism of SiC: short- or long- period periodic polytypes, as well as one-dimensionally disordered polytypes. A two-parameter bifurcation diagram has been studied : its fractal structure allows one to visualize various types of ''roads to chaos"