Method and Apparatus for Non-Destructive Evaluation of Materials

Methods and apparatus for characterizing composite materials for manufacturing quality assurance (QA), periodic inspection during the useful life, or for forensic analysis/material testing. System are provided that relate eddy-current sensor responses to the fiber layup of a composite structure, the presence of impact damage on a composite structure with or without a metal liner, volumetric stress within the composite, fiber tow density, and other NDE inspection requirements. Also provided are systems that determine electromagnetic material properties and material dimensions of composite materials from capacitive sensor inspection measurements. These properties are related to the presence of buried defects in non-conductive composite materials, moisture ingress, aging of the material due to service or environmental/thermal exposure, or changes in manufacturing quality

NDT and SHM of Carbon Fiber Composites using Linear Drive MWM-Arrays

Carbon fiber composites are used in a wide range of structural applications due to their excellent specific strength and stiffness. However, the anisotropic mechanical and electrical properties associated with the fibers within each composite layer present challenges, and opportunities, for Nondestructive Testing (NDT) methods used to characterize and assess the structure condition. This includes composite condition after manufacture (such as fiber orientation and density, porosity, delamination, and bond strength) and during usage (such as damage from impact, fiber breakage, thermal exposure or applied stress). Ultrasonic and thermographic methods can address some of these challenges, but eddy current methods provide an alternative method for composite structures that contain a conducting material, such as carbon fibers or a metallic liner. This presentation reviews recent advances in the development of eddy current sensors and arrays for carbon fiber composite NDT and Structural Health Monitoring (SHM) applications. The focus is on eddy current sensor constructs with linear drive windings, such as MWM -Arrays, that induce currents primarily within the linear fibers of the composite. By combining this type of sensor construct with micromechanical models that relate composite constituent properties to measurable sensor responses, insight is obtained into the volumetric distribution of electrical properties within the composite and the associated manufacturing, damage, or strain conditions. With knowledge of the fiber layup, this MWM-Array technology is able to detect damage and strain/stress as a function of depth and fiber orientation. This work has been funded by NASA, NA V AIR and the Army for applications ranging from composite overwrapped pressure vessels (COPVs) to aircraft structures and rotorcraft blades. This presentation will specifically present background on the MWM-Array technology, results from the micromechanical modeling effort, and results from ongoing efforts for high resolution imaging and volumetric strain sensing

Starting out in STEM : a study of young men and women in first year science, technology, engineering and mathematics courses

In late 2011, first year university students in science, technology, engineering and mathematics (STEM) courses across Australia were invited to participate in the international Interests and Recruitment in Science (IRIS) study. IRIS investigates the influences on young people\u27s decisions to choose university STEM courses and their subsequent experiences of these courses. The study also has a particular focus on the motivations and experiences of young women in courses such as physics, IT and engineering given the low rates of female participation in these fields. Around 3500 students from 30 Australian universities contributed their views on the relative importance of various school and non-school influences on their decisions, as well as insights into their experiences of university STEM courses so far. It is hoped that their contributions will help improve recruitment, retention and gender equity in STEM higher education and careers

Method and Apparatus for Non-Destructive Evaluation of Materials

Methods and apparatus for characterizing composite materials for manufacturing quality assurance (QA), periodic inspection during the useful life, or for forensic analysis/material testing. System are provided that relate eddy-current sensor responses to the fiber layup of a composite structure, the presence of impact damage on a composite structure with or without a metal liner, volumetric stress within the composite, fiber tow density, and other NDE inspection requirements. Also provided are systems that determine electromagnetic material properties and material dimensions of composite materials from capacitive sensor inspection measurements. These properties are related to the presence of buried defects in non-conductive composite materials, moisture ingress, aging of the material due to service or environmental/thermal exposure, or changes in manufacturing quality

Material condition assessment with eddy current sensors

Eddy current sensors and sensor arrays are used for process quality and material condition assessment of conducting materials. In an embodiment, changes in spatially registered high resolution images taken before and after cold work processing reflect the quality of the process, such as intensity and coverage. These images also permit the suppression or removal of local outlier variations. Anisotropy in a material property, such as magnetic permeability or electrical conductivity, can be intentionally introduced and used to assess material condition resulting from an operation, such as a cold work or heat treatment. The anisotropy is determined by sensors that provide directional property measurements. The sensor directionality arises from constructs that use a linear conducting drive segment to impose the magnetic field in a test material. Maintaining the orientation of this drive segment, and associated sense elements, relative to a material edge provides enhanced sensitivity for crack detection at edges

Polymorphism discovery and association analyses of the interferon genes in type 1 diabetes.

BACKGROUND: The aetiology of the autoimmune disease type 1 diabetes (T1D) involves many genetic and environmental factors. Evidence suggests that innate immune responses, including the action of interferons, may also play a role in the initiation and/or pathogenic process of autoimmunity. In the present report, we have adopted a linkage disequilibrium (LD) mapping approach to test for an association between T1D and three regions encompassing 13 interferon alpha (IFNA) genes, interferon omega-1 (IFNW1), interferon beta-1 (IFNB1), interferon gamma (IFNG) and the interferon consensus-sequence binding protein 1 (ICSBP1). RESULTS: We identified 238 variants, most, single nucleotide polymorphisms (SNPs), by sequencing IFNA, IFNB1, IFNW1 and ICSBP1, 98 of which where novel when compared to dbSNP build 124. We used polymorphisms identified in the SeattleSNP database for INFG. A set of tag SNPs was selected for each of the interferon and interferon-related genes to test for an association between T1D and this complex gene family. A total of 45 tag SNPs were selected and genotyped in a collection of 472 multiplex families. CONCLUSION: We have developed informative sets of SNPs for the interferon and interferon related genes. No statistical evidence of a major association between T1D and any of the interferon and interferon related genes tested was found.RIGHTS : This article is licensed under the BioMed Central licence at http://www.biomedcentral.com/about/license which is similar to the 'Creative Commons Attribution Licence'. In brief you may : copy, distribute, and display the work; make derivative works; or make commercial use of the work - under the following conditions: the original author must be given credit; for any reuse or distribution, it must be made clear to others what the license terms of this work are

The Development of Vocational Education in Canada

Our article considers the roots of prejudice against vocational education, surveys its history, and examines constitutional dilemmas that have inhibited its develop- ment. We emphasize that as technological advances draw the world more closely together, vocational preparedness becomes increasingly important. In an era of international cartels and free trade associations, “muddling through” no longer works. Since Canada cannot expect immigration to solve its labour problems, it requires a national system of vocational training, a systemic solution that ensures young people see vocational education as challenging and worthwhile. L’article suivant cherche à identifier les sources des préjugés contre l’enseigne- ment professionel, rappelle l’histoire de cet enseignement et fait le point sur les dilemmes constitutionnels qui ont entravé son développement. Les auteurs sou- lignent l’importance grandissante de la préparation à la vie professionnelle au fur et à mesure que le monde devient, en raison des progrès de la technologie, un village planétaire. Dans une ère de cartels internationaux et d’accords de libre échange, il n’est plus question de seulement “se tirer d’affaire.” Comme le Canada ne peut pas compter sur l’immigration pour résoudre ses problèmes de main-d’oeuvre, il faut un système national de formation professionnelle, une solution systémique qui permettra aux jeunes de voir l’éducation professionnelle comme quelque chose de stimulant et qui en vaut vraiment la peine.

CP asymmetry in B→ϕKSB \to \phi K_S in a general two-Higgs-doublet model with fourth-generation quarks

We discuss the time-dependent CP asymmetry of decay $B \to \phi K_S$ in an extension of the Standard Model with both two Higgs doublets and additional fourth-generation quarks. We show that although the Standard Model with two-Higgs-doublet and the Standard model with fourth generation quarks alone are not likely to largely change the effective $\sin 2 \beta$ from the decay of $B \to \phi K_S$, the model with both additional Higgs doublet and fourth-generation quarks can easily account for the possible large negative value of $\sin 2 \beta$ without conflicting with other experimental constraints. In this model, additional large CP violating effects may arise from the flavor changing Yukawa interactions between neutral Higgs bosons and the heavy fourth generation down type quark, which can modify the QCD penguin contributions. With the constraints obtained from $b \to s \bar{s} s$ processes such as $B \to X_s \gamma$ and $\Delta m_{B_s^0}$, this model can lead to the effective $\sin 2 \beta$ to be as large as $- 0.4$ in the CP asymmetry of $B \to \phi K_S$.Comment: 13 pages, 5 figures, references added, to appear in Eur.Phys.J.

Search for composite and exotic fermions at LEP 2

A search for unstable heavy fermions with the DELPHI detector at LEP is reported. Sequential and non-canonical leptons, as well as excited leptons and quarks, are considered. The data analysed correspond to an integrated luminosity of about 48 pb^{-1} at an e^+e^- centre-of-mass energy of 183 GeV and about 20 pb^{-1} equally shared between the centre-of-mass energies of 172 GeV and 161 GeV. The search for pair-produced new leptons establishes 95% confidence level mass limits in the region between 70 GeV/c^2 and 90 GeV/c^2, depending on the channel. The search for singly produced excited leptons and quarks establishes upper limits on the ratio of the coupling of the excited fermio

Beyond the ‘Tomlinson Trap’: analysing the effectiveness of section 1 of the Compensation Act 2006

One of the intentions underpinning section 1 of the Compensation Act 2006 was to provide reassurance to individual volunteers, and voluntary organisations, involved in what the provision called ‘desirable activities’ and including sport. The perception was that such volunteers, motivated by an apprehension about their increased vulnerability to negligence liability, and as driven by a fear of a wider societal compensation culture, were engaging excessively in risk-averse behaviour to the detriment of such socially desirable activities. Academic commentary on section 1 of the Compensation Act 2006 has largely regarded the provision as unnecessary and doing little more than restating existing common law practice. This article argues otherwise and, on critically reviewing the emerging jurisprudence, posits the alternative view that section 1, in practice, affords an enhanced level of protection and safeguarding for individuals undertaking functions in connection with a desirable activity. Nonetheless, the occasionally idiosyncratic judicial interpretation given to term ‘desirable activity’, potentially compounded by recent enactment of the Social Action, Responsibility and Heroism Act 2015, remains problematic. Two points of interest will be used to inform this debate. First, an analysis of the then House of Lords’ decision in Tomlinson and its celebrated ‘balancing exercise’ when assessing reasonableness in the context of negligence liability. Second, a fuller analysis of the application of section 1 in the specific context of negligence actions relating to the coaching of sport where it is argued that the, albeit limited, jurisprudence might support the practical utility of a heightened evidential threshold of gross negligence