Electrical Conductivity Response of Poly(Phenylene-vinylene)/Zeolite Composites Exposed to Ammonium Nitrate

Poly(p-phenylenevinylene) (PPV) was chemically synthesized via the polymerization of p-xylene-bis(tetrahydrothiophenium chloride) monomer and doped with H2SO4. To improve the electrical conductivity sensitivity of the conductive polymer, Zeolites Y (Si/Al = 5.1, 30, 60, 80) were added into the conductive polymer matrix. All composite samples show definite positive responses towards NH4NO3. The electrical conductivity sensitivities of the composite sensors increase linearly with increasing Si/Al ratio: with values of 0.201, 1.37, 2.80 and 3.18, respectively. The interactions between NH4NO3 molecules and the PPV/zeolite composites with respect to the electrical conductivity sensitivity were investigated through the infrared spectroscopy

Fabrication of Poly(p-Phenylene)/Zeolite Composites and Their Responses Towards Ammonia

Poly(p-phenylene) (PPP) was chemically synthesized via oxidative polymerization using benzene and doped with FeCl3. The electrical conductivity response of the doped PPP (dPPP) towards CO, H2 and NH3 is investigated. dPPP shows no electrical conductivity response towards the first two gases (CO and H2), but it shows a definite negative response towards NH3. The electrical conductivity sensitivity of dPPP increases linearly with increasing NH3 concentration. To improve the sensitivity of the sensor towards NH3, ZSM-5 zeolite is added into the conductive polymer matrix. The electrical sensitivity of the sensor increases with increasing zeolite content up to 30%. The effect of the type of cation in the zeolite pores is investigated: namely, Na+, K+, NH4+ and H+. The electrical conductivity sensitivity of the composites with different cations in the zeolite can be arranged in this order: K+ < no zeolite < Na+ < NH4+ < H+. The variation in electrical sensitivity with cation type can be described in terms of the acid-base interaction, the zeolite pore size and surface area. The PPP/Zeolite composite with H+ possesses the highest electrical sensitivity of −0.36 since H+ has the highest acidity, the highest pore volume and surface area, which combine to induce a more favorable NH3 adsorption and interaction with the conductive polymer

Controlled Aloin Release from Crosslinked Polyacrylamide Hydrogels: Effects of Mesh Size, Electric Field Strength and a Conductive Polymer

The aim of this paper is to investigate the effects of hydrogel mesh size, a conductive polymer, and electric field strength on controlled drug delivery phenomena using drug-loaded polyacrylamide hydrogels prepared at various crosslinking ratios both with and without a conductive polymer system. Poly(p-phenylene vinylene), PPV, as the model conductive polymer, was used to study its ability to control aloin released from aloin-doped poly(p-phenylene vinylene)/polyacrylamide hydrogel (aloin-doped PPV/PAAM). In the passive release, the diffusion of aloin from five aloin-doped PPV/PAAM hydrogel systems each was delayed ranging from during the first three hours to during the first 14 h due to the ionic interaction between the anionic drug and PPV. After the delayed periods, aloin could diffuse continuously into the buffer solution through the PAAM matrix. The amount of aloin released from the aloin-doped PPV/PAAM rose with increasing electric field strength as a result of the three mechanisms: the expansion of PPV chains inside the hydrogel, iontophoresis, and the electroporation of the matrix pore size, combined. Furthermore, the conductive polymer and the electric field could be used in combination to regulate the amount of release drug to a desired level, to control the release rate, and to switch the drug delivery on/off

The Soft and High Actuation Response of Graphene Oxide/Gelatin Soft Gel

The high actuation response of soft gel from a graphene oxide/gelatin composite was prepared as an alternative material in soft robotics applications. Graphene oxide (GO) was selected as the electroresponsive (ER) particle. GO was synthesized by modifying Hummer&rsquo;s method at various ratios of graphite (GP) to potassium permanganate (KMnO4). To study the effect of ER particles on electromechanical properties, GO was blended with gelatin hydrogel (GEL) at various concentrations. The electrical properties of the ER particles (GO and GP) and matrix (GEL) were measured. The capacitance (C), resistance (R), and dielectric constant of the GO/GEL composite were lower than those of the GO particles but higher than those of the GEL and GP/GEL composite at the given number of particles. The effects of external electric field strength and the distance between electrodes on the degree of bending and the dielectrophoresis force (Fd) were investigated. When the external electric field was applied, the composite bent toward electrode, because the electric field polarized the functional group of polymer molecules. Under applied 400 V/mm, the GO/GEL composite (5% w/w) showed the highest deflection angle (&theta; = 82.88&deg;) and dielectrophoresis force (7.36 N). From the results, we conclude that the GO/GEL composite can be an alternative candidate material for electromechanical actuator applications

The Soft and High Actuation Response of Graphene Oxide/Gelatin Soft Gel

The high actuation response of soft gel from a graphene oxide/gelatin composite was prepared as an alternative material in soft robotics applications. Graphene oxide (GO) was selected as the electroresponsive (ER) particle. GO was synthesized by modifying Hummer’s method at various ratios of graphite (GP) to potassium permanganate (KMnO4). To study the effect of ER particles on electromechanical properties, GO was blended with gelatin hydrogel (GEL) at various concentrations. The electrical properties of the ER particles (GO and GP) and matrix (GEL) were measured. The capacitance (C), resistance (R), and dielectric constant of the GO/GEL composite were lower than those of the GO particles but higher than those of the GEL and GP/GEL composite at the given number of particles. The effects of external electric field strength and the distance between electrodes on the degree of bending and the dielectrophoresis force (Fd) were investigated. When the external electric field was applied, the composite bent toward electrode, because the electric field polarized the functional group of polymer molecules. Under applied 400 V/mm, the GO/GEL composite (5% w/w) showed the highest deflection angle (θ = 82.88°) and dielectrophoresis force (7.36 N). From the results, we conclude that the GO/GEL composite can be an alternative candidate material for electromechanical actuator applications.</jats:p

Development of cornstarch-based hydrogel drug delivery patch controlled by the electric field for hypertension

Abstract To study electrical controlling drug delivery from poly(vinyl alcohol) (PVA), PVA was prepared at various crosslink ratio. Hydrochlorothiazide (HCTZ), which is used to treat high blood pressure, was selected as a model drug. The release characteristic of hydrochlorothiazide from PVA matrix was a studied by using modified franz diffusion cells at pH 7.4 and temperature of 37 °C for 48 h. The amounts of drug permeation was characterized by UV-vis spectrophotometry. The degree of swelling and mesh size of crosslinked PVA was investigated. The degree of swelling increase with decreasing crosslinking ratio. The amount of drug permeation is decreased with increasing crosslinking ratio which corresponded to degree of swelling. When external electric filed was applied, the amount of HCTZ increases with increasing electrical voltage due to electro-repulsion force and generation of micropore in pigskin. To increase solubility and biodegradability of hydrogel matrix, corn starch (CS) was blend with PVA hydrogel. For passive permeation, the amount of HCTZ permeation from PVA/CS and PVA at similar crosslinking ratio is 7.56 and 7.93%, respectively. Thus presenting of CS do not affect the permeation characteristic.</jats:p