Energy audit experiences in foundries

Steel industry presents one of the highest energy demand of all the industrial sector. Foundries have a really relevant role both in economical terms and as regards the energy demand. The cost of energy represents several percentage points of the overall costs of a foundry. The electricity demand is very high, particularly for the induction melting furnaces. A large amount of thermal energy is obtained both from natural gas combustion and from the coal needed for the process of formation of cast iron in cupolas. Moreover, the plant services must be considered: one very energy consumer is compressed air production. Every factory is different from another so that the proposal of actions of energy savings or thermal recovers requires a detailed study of each plant considering the lay out and analysing the single processes with related energy needs and thermal levels. The co-operation of the University of Padua with the Centro Produttivita` Veneto allowed to plan a series of energy audits in some foundries located in Vicenza province. The experiences of the first facilities surveys and audits recommendations demonstrated both potential advantage of energy savings and the related difficulties, often due to the high investment costs. Anyhow the joint work of auditing between the university experts and the foundry technicians produced a better awareness on the critical points of the plant and a higher rationality level in the evaluation of investments for the renewable of the machinery. Here, the method of performing the energy audits is described together with the very first results in terms of roposals for energy savings evaluated technically and economically

Energy efficiency opportunities in the service plants of cast iron foundries in Italy

Though in a foundry most of the energy is used in the process plants and particularly in energizing furnaces, service plants require absolutely large amounts of energy, above all as electricity. The most energy consuming service is compressed air preparation, but large amounts are due to lighting, HVAC, pumps and fans. These energy users are common to most of industrial branches with different weights both in absolute and relative terms. This paper reports on the experience of some energy audits carried out in five Italian cast iron foundries allowing to identify the relative importance of different services in this industrial branch. The analysis is based on real data measured during the audits. Energy saving actions were then conceived, comparing the results of new technologies applied in some factory sectors and the energy usage of the previous equipment

Advancements in hybrid photovoltaic-thermal systems: performance evaluations and applications

Due to European Directives (2010/31/UE on buildings energy performance, 2009/28/CE on the use of renewable energy, 2012/27/UE on the energy efficiency) the electric and thermal energy needs of new and retrofitted buildings are faced by increasing percentages of renewable energy. Solar energy and heat pumps are the most promising technologies mainly in residential buildings as they have reached great maturity. Anyway, in most cases solar energy utilizations systems are thermal (which convert solar energy to thermal energy) and photovoltaic (which convert solar energy to electricity) used as separated collectors. Commercial photovoltaic modules have nowadays an efficiency around 15 % - 18 %. It means that the most relevant part of solar radiation is lost. Such a remark gets more importance if the active surface is located in an urban environment, where the availability of surfaces exposed to the sun is scarce if compared to the buildings thermal loads. PhotoVoltaic / Thermal cogeneration (PV/T) aims to utilize the same area both for producing electricity and heat. As solar cells are sensitive to temperature (their efficiency lowers when temperature increases), heat is beneficially collected but it cannot be available at high temperatures. Many researches on performances and characteristics of different hybrid photovoltaic\u2013thermal technologies and systems have been carried out during the last years to face this problem; among these designs, systems utilizing air, liquid, heat pipes, phase change materials, and thermoelectric devices to aid cooling of PV cells. This paper provides a description of the applications of the photovoltaic\u2013thermal systems, such as building integrated PV/T, concentrating PV/T systems and photovoltaic\u2013thermal heat pump systems. Several factors affecting the performances and characteristics of the photovoltaic\u2013thermal systems are also summarized

Determinants of Firm Boundaries: Empirical Analysis of the Japanese Auto Industry from 1984 to 2002

We have assessed the determinants of the choice of integration, relational contracting (keiretsu sourcing) and market sourcing by seven Japanese automobile manufacturers (OEMs) with respect to 54 components in light of contract economics. Our major findings are the following. First, the specificity and interdependency of a component significantly promotes vertical integration over keiretsu and keiretsu over market, consistent with transaction cost economics. Second, interdependency is a more important consideration for the former choice than for the latter choice, and the reverse is the case for specificity. This suggests that the hold-up risk due to specific investment can be often effectively controlled by a relational contracting based on keiretsu sourcing, while accommodating non-contractible design changes may often require vertical integration. Third, while higher testability of a component makes the effects of specificity significantly smaller, it also promotes the choice of keiretsu sourcing over market sourcing. One interpretation of this last result is that while higher testability improves the contractibility of the component with high specificity, it simultaneously enhances the advantage of keiretsu sourcing since it provides more opportunities for the supplier to explore new information for a collaborative exploitation with an OEM.

Lamellar and inverse micellar structures of skin lipids: Effect of templating

The outermost layer of skin, the stratum corneum (SC), comprises rigid corneocytes in a layered lipid matrix. Using atomistic simulations we find that the equilibrium phase of the SC lipids is inverse micellar. A model of the corneocyte is used to demonstrate that lamellar layering is induced by the patterned corneocyte wall. The inverse micellar phase is consistent with in vivo observations in the lacunar spaces and at the stratum granulosum - SC boundary region, and suggests a functional role in the lipid synthesis pathway in vivo.Comment: pdflatex 5 pages, 10 page supplementary material. Published Physical Review Letters. Added link to website with animation

L'Image de Feu Saint-Cyran : Une Stratégie de la Polémique

　ジャンセニスムとは、ベルギーの神学者コルネリウス・ジャンセニウスの名に由来し、主 に今日のベルギーとフランスで展開された運動の総称である。ジャンセニウスの遺著『アウ グスチヌス』のフランスでの再版と、アントワヌ・アルノーの『頻繁なる聖体拝領について』 の出版を嚆矢として、以後数年に渡る論争の口火が切られた。この初期ジャンセニスム論争 は単なる神学の教義論争にとどまらず、故サン−シラン修道院長ことジャン・デュヴェルジ エ・ド・オーランヌの像をめぐり、熾烈な攻防戦が繰り広げられた。論争文書を繙きつつ、 現代に至るまでジャンセニスム運動の理論的支柱とされるこの人物の像が担った機能を考 える

Avoiding the fragility trap in Africa

Not only do Africa's fragile states grow more slowly than non-fragile states, but they seem to be caught in a"fragility trap". For instance, the probability that a fragile state in 2001 was still fragile in 2009 was 0.95. This paper presents an economic model where three features -- political instability and violence, insecure property rights and unenforceable contracts, and corruption -- conspire to create a slow-growth-poor-governance equilibrium trap into which these fragile states can fall. The analysis shows that, by addressing the three problems, fragile countries can emerge from the fragility trap and enjoy a level of sustained economic growth. But addressing these issues requires resources, which are scarce because external aid is often tailored to the country's performance and cut back when there is instability, insecurity, and corruption. The implication is that, even if aid is seemingly unproductive in these weak-governance environments, it could be hugely beneficial if it is invested in such a way that it helps these countries tackle the root causes of instability, insecurity, and corruption. Empirical estimations corroborate the postulated relationships of the model, supporting the notion that it is possible for African fragile countries to avoid the fragility trap.Economic Theory&Research,Debt Markets,Emerging Markets,Inequality,Achieving Shared Growth

Extended corresponding-states behavior for particles with variable range attractions

We propose an extension of the law of corresponding states that can be applied to systems - such as colloidal suspensions - that have widely different ranges of attractive interactions. We argue that, for such systems, the ``reduced'' second virial coefficient is a convenient parameter to quantify the effective range of attraction. This procedure allows us to give a simple definition of the effective range of attraction of potentials with different functional forms. The advantage of the present approach is that it allows us to estimate the relative location of the liquid-vapor and solid-fluid coexistence curves exclusively on basis of the knowledge of the pair-potential.Comment: REVTeX, 5 pages, 2 figure

Thermodynamic investigation of a shared cogeneration system with electrical cars for northern Europe climate

Transition to alternative energy systems is indicated by EU Commission as a suitable path to energy efficiency and energy saving in the next years. The aims are to decrease greenhouses gases emissions, relevance of fossil fuels in energy production and energy dependence on extra-EU countries. These goals can be achieved increasing renewable energy sources and/or efficiency on energy production processes. In this paper an innovative micro-cogeneration system for household application is presented: it covers heating, domestic hot water and electricity demands for a residential user. Solid oxide fuel cells, heat pump and Stirling engine are utilised as a system to achieve high energy conversion efficiency. A transition from traditional petrol cars to electric mobility is also considered and simulated here. Different types of fuel are considered to demonstrate the high versatility of the simulated cogeneration system by changing the pre-reformer of the fuel cell. Thermodynamic analysis is performed to prove high efficiency with the different fuels

«Textes à clés» comme notion littéraire : pour une lecture du Tutu, un roman de la fin du 19e siècle

「モデル小説」と呼ばれる文学概念の効用と限界を、19世紀末にフランスで出版された小 説『チュチュ』（プランセス・サッフォー著）の分析を通して明らかにする。『チュチュ』 なる小説は未邦訳であることもあり、その出版経緯と内容紹介も合わせて記す