Tritium supply and use: a key issue for the development of nuclear fusion energy

Full power operation of the International Thermonuclear Experimental Reactor (ITER) has been delayed and will now begin in 2035. Delays to the ITER schedule may affect the availability of tritium for subsequent fusion devices, as the global CANDU-type fission reactor fleet begins to phase out over the coming decades. This study provides an up to date account of future tritium availability by incorporating recent uncertainties over the life extension of the global CANDU fleet, as well as considering the potential impact of tritium demand by other fusion efforts. Despite the delays, our projections suggest that CANDU tritium remains sufficient to support the full operation of ITER. However, whether there is tritium available for a DEMO reactor following ITER is largely uncertain, and is subject to numerous uncontrollable externalities. Further tritium demand may come from any number of private sector “compact fusion” start-ups which have emerged in recent years, all of which aim to accelerate the development of fusion energy. If the associated technical challenges can be overcome, compact fusion programmes have the opportunity to use tritium over the next two decades whilst it is readily available, and before full power DT operation on ITER starts in 2035. Assuming a similar level of performance is achievable, a compact fusion development programme, using smaller reactors operating at lower fusion power, would require smaller quantities of tritium than the ITER programme, leaving sufficient tritium available for multiple concepts to be developed concurrently. The development of concurrent fusion concepts increases the chances of success, as it spreads the risk of failure. Additionally, if full tritium breeding capability is not expected to be demonstrated in DEMO until after 2050, an opportunity exists for compact fusion programmes to incorporate tritium breeding technology in nearer-term devices. DD start-up, which avoids the need for external tritium for reactor start-up, is dependent upon full tritium breeding capability, and may be essential for large-scale commercial roll-out of fusion energy. As such, from the standpoint of availability and use of external tritium, a compact route to fusion energy may be more advantageous, as it avoids longer-term complications and uncertainties in the future supply of tritium

Dynamic Power Convertor Development for Radioisotope Power Systems at NASA Glenn Research Center

The Thermal Energy Conversion Branch at NASA Glenn Research Center (GRC) is supporting the development of high-efficiency power convertors for use in Radioisotope Power Systems (RPS). Significant progress was made towards such a system that utilized Stirling conversion during the 2001 to 2015 timeframe. Flight development of the Advanced Stirling Radioisotope Generator (ASRG) was cancelled in 2013 by the Department of Energy (DOE) and NASA Headquarters primarily due to budget constraints, and the Advanced Stirling Convertor (ASC) technology contract was subsequently concluded in 2015. A new chapter of technology development has recently been initiated by the NASA RPS Program. This effort is considering all dynamic power convertor options, such as Stirling and Brayton cycles. Four convertor development contracts supporting this effort were awarded in 2017. The awarded contracts include two free-piston Stirling, one thermoacoustic Stirling, and one turbo-Brayton designs. The technology development contracts each consist of up to three phases: Design, Fabricate, and Test. As of May 2018, all contracts have completed the Design Phase, and each underwent a design review with an independent review board. Three of the contracts are planned to execute the Phase 2 option for fabrication. Convertors manifesting from these development efforts will then undergo independent validation and verification at NASA facilities, which will consist of convertor performance and RPS viability demonstrations. Example tests include launch vibration simulation, performance mapping over the environmental temperature range, and static acceleration exposure. In parallel with this renewed development effort, NASA GRC is still demonstrating free-piston Stirling convertor technology using assets from previous projects. The Stirling Research Laboratory (SRL) is still operating several convertors from previous development projects which have similarities and relevance to current contract designs. Four of which are flexure-bearing based, and another six are gas-bearing based. One of the flexure-bearing convertors has accumulated over 110,000 hours of operation, and holds the current record for maintenance-free heat-engine run-time. Another flexure-bearing convertor was recently manually shutdown after 105,620 hours of operation, then disassembled and inspected. This inspection produced a wealth of information about the effects of this amount of runtime on the technology's components. One of the engineering unit flexure-bearing convertors recently underwent launch simulation vibration test, a static acceleration exposure up to 20 g, and was then placed on extended operation. Amongst the gas-bearing convertors, the longest running unit has accumulated over 70,000 hours of operation. Four high-fidelity gas-bearing convertors from the ASRG project are still operating continuously, for which the longest runtime has reached 28,000 hours

Revisiting Ruddick: Feminism, pacifism and non-violence

This article explores feminist contentions over pacifism and non-violence in the contextof the Greenham Common Peace Camp in the 1980s and later developments offeminist Just War Theory. We argue that Sara Ruddick’s work puts feminist pacifism, its radical feminist critics and feminist just war theory equally into question. Although Ruddick does not resolve the contestations within feminism over peace, violence and the questions of war, she offers a productive way of holding the tension between them. In our judgment, her work is helpful not only for developing a feminist political response to the threats and temptations of violent strategies but also for thinking through the question of the relation between violence and politics as such

Shoreham Nuclear Power Station offsite radiological emergency response plan for Suffolk County

1 v. (various pagings) : ill., maps ; 29 cm.https://commons.library.stonybrook.edu/government-documents-regional-digital-research-collection/1119/thumbnail.jp

Chapter 20 Assessment of radiation pollution from nuclear power plants

Nuclear power plants split uranium atoms in a process called fission. In a nuclear power plant, heat is generated to produce steam that spins a turbine to generate electricity. Nuclear energy has been proposed in response to the need for a clean energy source compared to CO2 production plants. However, nuclear energy is not necessarily a source of clean energy as nuclear power plants release small amounts of greenhouse emissions in activities related to building and running the plant. Moreover, even if all safety measures are followed, there is no guarantee that an accident will not occur in a nuclear power plant. In the case of an accident involving a nuclear power plant, the environment and the people around it may be exposed to high levels of radiation. Another important environmental problem related to nuclear energy is the generation of radioactive waste that can remain radioactive and dangerous to human health for thousands of years. There are also several issues with burying the radioactive waste. Here, we describe different types of radioactive waste pollution from nuclear power plants, their environmental effects, nuclear regulations, and nuclear power plant incidents. Moreover, two case studies on nuclear power plant accidents and their consequences are discussed

Fisheries in Iwaki after the Fukushima Dai'ichi Nuclear Accident: Lessons for Coastal Management under Conditions of High Uncertainty?

This article evaluates factors driving perception of risk and uncertainty in fisheries in Iwaki City, Fukushima Prefecture, Japan, following the Fukushima Dai'ichi nuclear accident. Particular attention is paid to lessons that may be learned for managing uncertainties and risks in coastal management more generally. The 2011 accident has had profound effects on Fukushima fisheries. Commercial coastal fisheries have been stopped since, and efforts to understand and monitor the effects of marine radioactive contamination on produce from the sea continue. Small-scale trial fisheries have, however, re-commenced with a view to gradually re-starting Fukushima fisheries over time. Drawing on in-depth interviews, discussion groups, and field observations from Iwaki and Fukushima Prefecture more widely, three factors are discussed: the role of trusted local-level points of contact; the value of transparent monitoring and screening that acknowledges remaining limitations and uncertainties; and the importance of taking seriously the cultural dimensions of rapid and potentially irreversible environmental change