The Internationalization of Global Start-Ups: Understanding the Role of Serial Entrepreneurs

Using qualitative methodology, we aim to understand how serial entrepreneurs can foster the development of born-global ventures. We consider a born-global start-up as the final stage of the learning process for a serial entrepreneur, advancing propositions regarding the importance of prior entrepreneurial experience – in terms of knowledge acquisition, identification and exploitation of opportunities, social networks development – for bornglobal venture creation and growth. We verify that the serial entrepreneur’s previous entrepreneurial experiences could substitute for the lack of knowledge, opportunity recognition and social networks of a born-global start-up. Thus, we recognize the necessity of a shift in the unit of analysis, from born-global start-up to a global serial entrepreneur. Moreover, we suggest to follow a dynamic approach when the born-global start-up issue is discussed since we expect that the entrepreneur’s learning process evolves over time in relation to their quality of previous experiences.born-global, international new ventures, entrepreneurship, serial entrepreneur, internationalization, social network, entrepreneurial experience, opportunity identification, opportunity exploration, longitudinal case study.

Rivalry and Learning Among Clustered and Isolated Firms

In this paper explore the relationships between rivalry and geographical proximity at the very level of contacts between individual firms. In particular, we wish to highlight the influence of geographical proximity on rival identification, on the comparison of their knowledge, and on the consequent elaboration of a strategy. In order to reproduce the interactions between firms, we made use of an agent-based model (ABM) where the strategic choices of rival firms are derived from general assumptions on competitive behavior and learning processes. Aim of the model is to investigate the co-evolution of firms' knowledge, strategies and performances. Substantial empirical evidences claim that firms located in geographical clusters are more likely to learn and innovate than isolated firms.Industrial Clusters, Industrial Districts, Knowledge Development, Rivalry

DT Sector Collector electronics design and construction

The CMS detector at LHC is equipped with Drift Tubes (DT) chambers for muon detection and triggering in the barrel region. The Sector Collector (SC) modules collect the track segments reconstructed by on-chamber trigger electronics. Data from different chambers are aligned in time and sent to the subsequent reconstruction processors via optical links. Several FPGA devices performing the processing of the data were designed in VHDL, including spy features to monitor the trigger data flow. A test jig was set up with custom hardware and software in order to fully validate final production boards. Installation and commissioning in CMS provided first experience with the synchronization and monitoring tools

Design and Test of the Off-Detector Electronics for the CMS Barrel Muon Trigger

Drift Tubes chambers are used in the CMS barrel for tagging the passage of high Pt muons generated in a LHC event and for triggering the CMS data read out. The Sector Collector (SC) system synchronizes the track segments built by trigger modules on the chambers and deliver them to reconstruction processors (Track Finder, TF) that assemble full muon tracks. Then, the Muon Sorter (MS) has to select the best four candidates in the barrel and to filter fake muons generated by the TF system redundancy. The hardware implementations of the Sector Collector and Muon Sorter systems satisfy radiation, I/O and fast timing constraints using several FPGA technologies. The hardware was tested with custom facilities, integrated with other trigger subsystems, and operated in a beam test. A test beam on a 40 MHz bunched beam validated the local trigger electronics and off-detector prototype cards and the synchronization tools. The CMS Magnet Test and Cosmic challenge in 2006 proved stable and reliable operation of the Drift Tubes trigger and its integration with other trigger systems and with the readout system. Constraints, design, test and operation of the modules are presented

Use of antifuse-FPGAs in the Track-Sorter-Master of the CMS Drift Tube Chambers

The front-end system of the Silicon Drift Detectors (SDDs) of the ALICE experiment is made of two ASICs. The first chip performs the preamplification, temporary analogue storage and analogue-to-digital conversion of the detector signals. The second chip is a digital buffer that allows for a significant reduction of the connection from the front-end module to the outside world. In this paper, the results achieved on the first complete prototype of the front-end system for the SDDs of ALICE are presented

A measurement of the tau mass and the first CPT test with tau leptons

We measure the mass of the tau lepton to be 1775.1+-1.6(stat)+-1.0(syst.) MeV using tau pairs from Z0 decays. To test CPT invariance we compare the masses of the positively and negatively charged tau leptons. The relative mass difference is found to be smaller than 3.0 10^-3 at the 90% confidence level.Comment: 10 pages, 4 figures, Submitted to Phys. Letts.

Bose-Einstein Correlations of Three Charged Pions in Hadronic Z^0 Decays

Bose-Einstein Correlations (BEC) of three identical charged pions were studied in 4 x 10^6 hadronic Z^0 decays recorded with the OPAL detector at LEP. The genuine three-pion correlations, corrected for the Coulomb effect, were separated from the known two-pion correlations by a new subtraction procedure. A significant genuine three-pion BEC enhancement near threshold was observed having an emitter source radius of r_3 = 0.580 +/- 0.004 (stat.) +/- 0.029 (syst.) fm and a strength of \lambda_3 = 0.504 +/- 0.010 (stat.) +/- 0.041 (syst.). The Coulomb correction was found to increase the \lambda_3 value by \~9% and to reduce r_3 by ~6%. The measured \lambda_3 corresponds to a value of 0.707 +/- 0.014 (stat.) +/- 0.078 (syst.) when one takes into account the three-pion sample purity. A relation between the two-pion and the three-pion source parameters is discussed.Comment: 19 pages, LaTeX, 5 eps figures included, accepted by Eur. Phys. J.

W+W- production and triple gauge boson couplings at LEP energies up to 183 GeV

A study of W-pair production in e+e- annihilations at Lep2 is presented, based on 877 W+W- candidates corresponding to an integrated luminosity of 57 pb-1 at sqrt(s) = 183 GeV. Assuming that the angular distributions of the W-pair production and decay, as well as their branching fractions, are described by the Standard Model, the W-pair production cross-section is measured to be 15.43 +- 0.61 (stat.) +- 0.26 (syst.) pb. Assuming lepton universality and combining with our results from lower centre-of-mass energies, the W branching fraction to hadrons is determined to be 67.9 +- 1.2 (stat.) +- 0.5 (syst.)%. The number of W-pair candidates and the angular distributions for each final state (qqlnu,qqqq,lnulnu) are used to determine the triple gauge boson couplings. After combining these values with our results from lower centre-of-mass energies we obtain D(kappa_g)=0.11+0.52-0.37, D(g^z_1)=0.01+0.13-0.12 and lambda=-0.10+0.13-0.12, where the errors include both statistical and systematic uncertainties and each coupling is determined setting the other two couplings to the Standard Model value. The fraction of W bosons produced with a longitudinal polarisation is measured to be 0.242+-0.091(stat.)+-0.023(syst.). All these measurements are consistent with the Standard Model expectations.Comment: 48 pages, LaTeX, including 13 eps or ps figures, submitted to European Physical Journal

First Measurement of Z/gamma* Production in Compton Scattering of Quasi-real Photons

We report the first observation of Z/gamma* production in Compton scattering of quasi-real photons. This is a subprocess of the reaction e+e- to e+e-Z/gamma*, where one of the final state electrons is undetected. Approximately 55 pb-1 of data collected in the year 1997 at an e+e- centre-of-mass energy of 183 GeV with the OPAL detector at LEP have been analysed. The Z/gamma* from Compton scattering has been detected in the hadronic decay channel. Within well defined kinematic bounds, we measure the product of cross-section and Z/gamma* branching ratio to hadrons to be (0.9+-0.3+-0.1) pb for events with a hadronic mass larger than 60 GeV, dominated by (e)eZ production. In the hadronic mass region between 5 GeV and 60 GeV, dominated by (e)egamma* production, this product is found to be (4.1+-1.6+-0.6) pb. Our results agree with the predictions of two Monte Carlo event generators, grc4f and PYTHIA.Comment: 18 pages, LaTeX, 5 eps figures included, submitted to Physics Letters