Charmless Hadronic B Decays at BABAR

We present preliminary results of several searches for rare charmless hadronic decays of the B meson using data collected by the BABAR detector at the Stanford Linear Accelerator Center's PEP-II storage ring. We search for the decays h^+h^-, h^+h^-h^+, h^+h^-pi^0, X^0h^+, and X^0 K_S^0, where h = pi or K, and X^0 = eta^prime or omega. In a sample of 8.8 million B-anti-B decays we measure the branching fractions: BF(B^0 --> pi^+pi^-) = (9.3^{+2.6}_{-2.3}^{+1.2}_{-1.4}) x 10^{-6}, BF(B^0 --> K^+pi^-) = (12.5^{+3.0}_{-2.6}^{+1.3}_{-1.7}) x 10^{-6}, BF(B^0 --> rho^-pi^+) = (49 +/- 13^{+6}_{-5}) x 10^{-6}$, and BF(B^+ --> eta^prime K^+) = (62 +/- 18 +/- 8) x 10^{-6}$. We calculate upper limits for the modes without a significant signal.Comment: 6 pages, 2 postscript figues, submitted to Proceedings of DPF200

Tripartite and bipartite entanglement in continuous-variable tripartite systems

We examine one asymmetric adnd two fully symmetric Gaussian continuous-variable systems in terms of their tripartite and bipartite entanglement properties. We treat pure states and are able to find analytic solutions using the undepleted pump approximation for the Hamiltonian models, and standard beamsplitter relations for a model that mixes the outputs of optical parametric oscillators. Our two symmetric systems exhibit perfect tripartite correlations, but only in the unphysical limit of infinite squeezing. For more realistic squeezing parameters, all three systems exhibit both tripartite and bipartite entanglement. We conclude that none of the outputs are completely analogous to either GHZ or W states, but there are parameter regions where they produce T states introduced by Adesso \etal The qualitative differences in the output states for different interaction parameters indicate that continuous-variable tripartite quantum information systems offer a versatility not found in bipartite systems.Comment: 18 pages, 6 figures. arXiv admin note: text overlap with arXiv:1510.0182

Silicon halide-alkali metal flames as a source of solar grade silicon

The feasibility of using alkali metal-silicon halide diffusion flames to produce solar-grade silicon in large quantities and at low cost is demonstrated. Prior work shows that these flames are stable and that relatively high purity silicon can be produced using Na + SiCl4 flames. Silicon of similar purity is obtained from Na + SiF4 flames although yields are lower and product separation and collection are less thermochemically favored. Continuous separation of silicon from the byproduct alkali salt was demonstrated in a heated graphite reactor. The process was scaled up to reduce heat losses and to produce larger samples of silicon. Reagent delivery systems, scaled by a factor of 25, were built and operated at a production rate of 0.5 kg Si/h. Very rapid reactor heating rates are observed with wall temperatures reaching greater than 2000 K. Heat release parameters were measured using a cooled stainless steel reactor tube. A new reactor was designed

Study of ice accretion on icing wind tunnel components

In a closed loop icing wind tunnel the icing cloud is simulated by introducing tiny water droplets through an array of nozzles upstream of the test section. This cloud will form ice on all tunnel components (e.g., turning vanes, inlet guide vanes, fan blades, and the heat exchanger) as the cloud flows around the tunnel. These components must have the capacity to handle their icing loads without causing significant tunnel performance degradation during the course of an evening's run. To aid in the design of these components for the proposed Altitude Wind Tunnel (AWT) at NASA Lewis Research Center the existing Icing Research Tunnel (IRT) is used to measure icing characteristics of the IRT's components. The results from the IRT are scaled to the AWT to account for the AWT's larger components and higher velocities. The results show that from 90 to 45 percent of the total spray cloud froze out on the heat exchanger. Furthermore, the first set of turning vanes downstream of the test section, the FOD screen and the fan blades show significant ice formation. The scaling shows that the same results would occur in the AWT

Remote systems development

Potential space missions of the nineties and the next century require that we look at the broad category of remote systems as an important means to achieve cost-effective operations, exploration and colonization objectives. This paper addresses such missions, which can use remote systems technology as the basis for identifying required capabilities which must be provided. The relationship of the space-based tasks to similar tasks required for terrestrial applications is discussed. The development status of the required technology is assessed and major issues which must be addressed to meet future requirements are identified. This includes the proper mix of humans and machines, from pure teleoperation to full autonomy; the degree of worksite compatibility for a robotic system; and the required design parameters, such as degrees-of-freedom. Methods for resolution are discussed including analysis, graphical simulation and the use of laboratory test beds. Grumman experience in the application of these techniques to a variety of design issues are presented utilizing the Telerobotics Development Laboratory which includes a 17-DOF robot system, a variety of sensing elements, Deneb/IRIS graphics workstations and control stations. The use of task/worksite mockups, remote system development test beds and graphical analysis are discussed with examples of typical results such as estimates of task times, task feasibility and resulting recommendations for design changes. The relationship of this experience and lessons-learned to future development of remote systems is also discussed

Generating controllable atom-light entanglement with a Raman atom laser system

We introduce a scheme for creating continuous variable entanglement between an atomic beam and an optical field, by using squeezed light to outcouple atoms from a BEC via a Raman transition. We model the full multimode dynamics of the atom laser beam and the squeezed optical field, and show that with appropriate two-photon detuning and two-photon Rabi frequency, the transmitted light is entangled in amplitude and phase with the outcoupled atom laser beam. The degree of entanglement is controllable via changes in the two-photon Rabi frequency of the outcoupling process.Comment: 4 pages, 4 figure