Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) spectrometer design and performance

The development of the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) has been completed at JPL. This paper outlines the functional requirements of the spectrometer optics subsystem, and describes the spectrometer optical design. The optical subsystem performance is shown in terms of spectral modulation transfer functions, radial energy distributions, and system transmission at selected wavelengths for the four spectrometers. An outline of the spectrometer alignment is included

AVIRIS foreoptics, fiber optics and on-board calibrator

The foreoptics, fiber optic system and calibration source of the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) are described. The foreoptics, based on a modified Kennedy scanner, is coupled by optical fibers to the four spectrometers. The optical fibers allow convenient positioning of the spectrometers in the limited space and enable simple compensation of the scanner's thermal defocus (at the -23 C operating temp) by active control of the fiber focal plane position. A challenging requirement for the fiber optic system was the transmission to the spectral range 1.85 to 2.45 microns at .45 numerical aperture. This was solved with custom fluoride glass fibers from Verre Fluore. The onboard calibration source is also coupled to the spectrometers by the fibers and provides two radiometric levels and a reference spectrum to check the spectrometers' alignment. Results of the performance of the assembled subsystems are presented

Convex Diffraction Grating Imaging Spectrometer

A 1:1 Offner mirror system for imaging off-axis objects is modified by replacing a concave spherical primary mirror that is concentric with a convex secondary mirror with two concave spherical mirrors M1 and M2 of the same or different radii positioned with their respective distances d1 and d2 from a concentric convex spherical diffraction grating having its grooves parallel to the entrance slit of the spectrometer which replaces the convex secondary mirror. By adjusting their distances d1 and d2 and their respective angles of reflection alpha and beta, defined as the respective angles between their incident and reflected rays, all aberrations are corrected without the need to increase the spectrometer size for a given entrance slit size to reduce astigmatism, thus allowing the imaging spectrometer volume to be less for a given application than would be possible with conventional imaging spectrometers and still give excellent spatial and spectral imaging of the slit image spectra over the focal plane

An argument against the focus on Community Resilience in Public Health

Background - It has been suggested that Public Health professionals focus on community resilience in tackling chronic problems, such as poverty and deprivation; is this approach useful? Discussion - Resilience is always i) of something ii) to something iii) to an endpoint, as in i) a rubber ball, ii) to a blunt force, iii) to its original shape. “Community resilience” might be: of a neighbourhood, to a flu pandemic, with the endpoint, to return to normality. In these two examples, the endpoint is as-you-were. This is unsuitable for some examples of resilience. A child that is resilient to an abusive upbringing has an endpoint of living a happy life despite that upbringing: this is an as-you-should-be endpoint. Similarly, a chronically deprived community cannot have the endpoint of returning to chronic deprivation: so what is its endpoint? Roughly, it is an as-you-should-be endpoint: to provide an environment for inhabitants to live well. Thus resilient communities will be those that do this in the face of challenges. How can they be identified? One method uses statistical outliers, neighbourhoods that do better than would be expected on a range of outcomes given a range of stressors. This method tells us that a neighbourhood is resilient but not why it is. In response, a number of researchers have attributed characteristics to resilient communities; however, these generally fail to distinguish characteristics of a good community from those of a resilient one. Making this distinction is difficult and we have not seen it successfully done; more importantly, it is arguably unnecessary. There already exist approaches in Public Health to assessing and developing communities faced with chronic problems, typically tied to notions such as Social Capital. Communityresilience to chronic problems, if it makes sense at all, is likely to be a property that emerges from the various assets in a community such as human capital, built capital and natural capital. Summary - Public Health professionals working with deprived neighbourhoods would be better to focus on what neighbourhoods have or could develop as social capital for living well, rather than on the vague and tangential notion of community resilience.</p

Developments in Performance Monitoring of Concrete Exposed to Extreme Environments.

The performance of the surface zone of concrete is acknowledged as a major factor governing the rate of deterioration of reinforced concrete structures because it provides the only barrier to the ingress of water containing dissolved ionic species such as chlorides, which ultimately initiate corrosion of the reinforcement. In situ monitoring of cover-zone concrete is therefore critical in attempting to make realistic predictions as to the in-service performance of the structure. To this end, this paper presents developments in a remote interrogation system to allow for continuous, real-time monitoring of the cover-zone concrete from an office setting. Use is made of a multi electrode array embedded within cover-zone concrete to acquire discretized electrical resistivity and temperature measurements, with both parameters monitored spatially and temporally. On-site instrumentation, which allows for the remote interrogation of concrete samples placed at a marine exposure site, is detailed together with data handling and processing procedures. Site measurements highlight the influence of temperature on electrical resistivity and an Arrhenius-based temperature correction protocol is developed using on-site measurements to standardize resistivity data to a reference temperature; this is an advancement over the use of laboratory-based procedures. The testing methodology and interrogation system represent a robust, low-cost, and high-value technique that could be deployed for intelligent monitoring of reinforced concrete structures

Stimulus specific cortical activity associated with ignoring distraction during working memory encoding and maintenance

Distraction disrupts Working Memory (WM) performance, but how the brain filters distraction is not known. One possibility is that neural activity associated with distractions is suppressed relative to a baseline/passive task (biased competition). Alternatively, distraction may be denied access to WM, with no suppression. Furthermore, behavioural work indicates separate mechanisms for ignoring distractions which occur (1) while we put information into WM (Encoding Distraction, ED) and (2) while we maintain already encoded information during the WM delay period (Delay Distraction, DD). Here we used fMRI in humans to measure category-sensitive cortical activity and probe the extent to which ED/DD mechanisms involve enhancement/suppression during a WM task. We observed significant enhancement of task-relevant activity, relative to a passive view task, which did not differ according to whether or when distractors appeared. For both ED and DD we found no evidence of suppression, but instead a robust increase in stimulus specific activity in response to additional stimuli presented during the passive view task, which was not seen for the WM task, when those additional stimuli were to be ignored. The results indicate that ED/DD resistance does not necessarily involve suppression of distractor-related activity. Rather, a rise in distractor-associated activity is prevented when distractors are presented, supporting models of input gating, and providing a potential mechanism by which input-gating might be achieved

Recognition and diagnosis of sleep disorders in Parkinson's disease

Contains fulltext : 109296.pdf (publisher's version ) (Open Access)Sleep disturbances are among the most frequent and incapacitating non-motor symptoms of Parkinson's disease (PD), and are increasingly recognized as an important determinant of impaired quality of life. Here we review several recent developments regarding the recognition and diagnosis of sleep disorders in PD. In addition, we provide a practical and easily applicable approach to the diagnostic process as a basis for tailored therapeutic interventions. This includes a stepwise scheme that guides the clinical interview and subsequent ancillary investigations. In this scheme, the various possible sleep disorders are arranged not in order of prevalence, but in a 'differential diagnostic' order. We also provide recommendations for the use of sleep registrations such as polysomnography. Furthermore, we point out when a sleep specialist could be consulted to provide additional diagnostic and therapeutic input. This structured approach facilitates early detection of sleep disturbances in PD, so treatment can be initiated promptly

Death following pulmonary complications of surgery before and during the SARS-CoV-2 pandemic

Background: This study aimed to determine the impact of pulmonary complications on death after surgery both before and during the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic. Methods: This was a patient-level, comparative analysis of two, international prospective cohort studies: one before the pandemic (January-October 2019) and the second during the SARS-CoV-2 pandemic (local emergence of COVID-19 up to 19 April 2020). Both included patients undergoing elective resection of an intra-abdominal cancer with curative intent across five surgical oncology disciplines. Patient selection and rates of 30-day postoperative pulmonary complications were compared. The primary outcome was 30-day postoperative mortality. Mediation analysis using a natural-effects model was used to estimate the proportion of deaths during the pandemic attributable to SARS-CoV-2 infection. Results: This study included 7402 patients from 50 countries; 3031 (40.9 per cent) underwent surgery before and 4371 (59.1 per cent) during the pandemic. Overall, 4.3 per cent (187 of 4371) developed postoperative SARS-CoV-2 in the pandemic cohort. The pulmonary complication rate was similar (7.1 per cent (216 of 3031) versus 6.3 per cent (274 of 4371); P = 0.158) but the mortality rate was significantly higher (0.7 per cent (20 of 3031) versus 2.0 per cent (87 of 4371); P &lt; 0.001) among patients who had surgery during the pandemic. The adjusted odds of death were higher during than before the pandemic (odds ratio (OR) 2.72, 95 per cent c.i. 1.58 to 4.67; P &lt; 0.001). In mediation analysis, 54.8 per cent of excess postoperative deaths during the pandemic were estimated to be attributable to SARS-CoV-2 (OR 1.73, 1.40 to 2.13; P &lt; 0.001). Conclusion: Although providers may have selected patients with a lower risk profile for surgery during the pandemic, this did not mitigate the likelihood of death through SARS-CoV-2 infection. Care providers must act urgently to protect surgical patients from SARS-CoV-2 infection