Negative-resistance models for parametrically flux-pumped superconducting quantum interference devices

A Superconducting QUantum Interference Device (SQUID) modulated by a fast oscillating magnetic flux can be used as a parametric amplifier, providing gain with very little added noise. Here, we develop linearized models to describe the parametrically flux-pumped SQUID in terms of an impedance. An unpumped SQUID acts as an inductance, the Josephson inductance, whereas a flux-pumped SQUID develops an additional, parallel element which we have coined the ``pumpistor.'' Parametric gain can be understood as a result of a negative resistance of the pumpistor. In the degenerate case, the gain is sensitive to the relative phase between the pump and signal. In the nondegenerate case, gain is independent of this phase. We develop our models first for degenerate parametric pumping in the three-wave and four-wave cases, where the pump frequency is either twice or equal to the signal frequency, respectively. We then derive expressions for the nondegenerate case where the pump frequency is not a multiple of the signal frequency, where it becomes necessary to consider idler tones which develop. For the nondegenerate three-wave case, we present an intuitive picture for a parametric amplifier containing a flux-pumped SQUID where current at the signal frequency depends upon the load impedance at an idler frequency. This understanding provides insight and readily testable predictions of circuits containing flux-pumped SQUIDs.Comment: 27 pages, 6 figures, 1 tabl

Self-heating in small mesa structures

We study analytically and numerically a problem of self-heating in small mesa structures. Our results show that the self-heating is proportional to a characteristic in-plane size of the mesa. Experimental data for small high-$T_c$ superconductor Bi2212 mesas are in qualitative agreement with our calculations. We estimate the self-heating in Bi2212 mesas with different sizes and demonstrate that the self-heating can effectively be obviated in small mesa structures.Comment: 3 pages, 2 figures. In the 2-nd version a misprint in the expression for self-heating was correcte

Bias and temperature dependence of the noise in a single electron transistor

A single electron transistor based on Al-AlO_x-Nb tunnel junctions was fabricated by shadow evaporation and in situ barrier formation. Its output current noise was measured, using a transimpedance amplifier setup, as a function of bias voltage, gain, and temperature, in the frequency range 1...300 Hz. The spot noise at 10 Hz is dominated by a gain dependent component, indicating that the main noise contribution comes from fluctuations at the input of the transistor. Deviations from ideal input charge noise behaviour are found in the form of a bias dependence of the differential charge equivalent noise, i. e. the derivative of current noise with respect to gain. The temperature dependence of this effect could indicate that heating is activating the noise sources, and that they are located inside or in the near vicinity of the junctions.Comment: 16 pages, 9 figures (EPS

Photon generation in an electromagnetic cavity with a time-dependent boundary

We report the observation of photon generation in a microwave cavity with a time-dependent boundary condition. Our system is a microfabricated quarter-wave coplanar waveguide cavity. The electrical length of the cavity is varied using the tunable inductance of a superconducting quantum interference device. It is measured in the quantum regime, where the temperature is significantly less than the resonance frequency (~ 5 GHz). When the length is modulated at approximately twice the static resonance frequency, spontaneous oscillations of the cavity field are observed. Time-resolved measurements of the dynamical state of the cavity show multiple stable states. The behavior is well described by theory. Connections to the dynamical Casimir effect are discussed.Comment: 5 pages, 3 Figure

The pumpistor: a linearized model of a flux-pumped SQUID for use as a negative-resistance parametric amplifier

We describe a circuit model for a flux-driven SQUID. This is useful for developing insight into how these devices perform as active elements in parametric amplifiers. The key concept is that frequency mixing in a flux-pumped SQUID allows for the appearance of an effective negative resistance. In the three-wave, degenerate case treated here, a negative resistance appears only over a certain range of allowed input signal phase. This model readily lends itself to testable predictions of more complicated circuits.Comment: 4 pages, 3 figure

Fast readout of a single Cooper-pair box using its quantum capacitance

We have fabricated a single Cooper-pair box (SCB) together with an on-chip lumped element resonator. By utilizing the quantum capacitance of the SCB, its state can be read out by detecting the phase of a radio-frequency (rf) signal reflected off the resonator. The resonator was optimized for fast readout. By studying quasiparticle tunneling events in the SCB, we have characterized the performance of the readout and found that we can perform a single shot parity measurement in approximately 50 ns. This is an order of magnitude faster than previously reported measurements.Comment: 7 pages, 5 figure

Dynamical Casimir effect entangles artificial atoms

We show that the physics underlying the dynamical Casimir effect may generate multipartite quantum correlations. To achieve it, we propose a circuit quantum electrodynamics (cQED) scenario involving superconducting quantum interference devices (SQUIDs), cavities, and superconducting qubits, also called artificial atoms. Our results predict the generation of highly entangled states for two and three superconducting qubits in different geometric configurations with realistic parameters. This proposal paves the way for a scalable method of multipartite entanglement generation in cavity networks through dynamical Casimir physics.Comment: Improved version and references added. Accepted for publication in Physical Review Letter

Anticorrelation between temperature and fluctuations in moderately damped Josephson junctions

We study the influence of dissipation on the switching current statistics of moderately damped Josephson junctions. Different types of both low- and high- $T_c$ junctions with controlled damping are studied. The damping parameter of the junctions is tuned in a wide range by changing temperature, magnetic field, gate voltage, introducing a ferromagnetic layer or in-situ capacitive shunting. A paradoxical collapse of switching current fluctuations occurs with increasing $T$ in all studied junctions. The phenomenon critically depends on dissipation in the junction and is explained by interplay of two counteracting consequences of thermal fluctuations, which on the one hand assist in premature switching into the resistive state and on the other hand help in retrapping back to the superconducting state. This is one of the rare examples of anticorrelation between temperature and fluctuation amplitude of a physically measurable quantity.Comment: 17 pages, 20 figure