Silicon resonant microcantilevers for absolute pressure measurement

This work is focused on the developing of silicon resonant microcantilevers for the measurement of the absolute pressure. The microcantilevers have been fabricated with a two-mask bulk micromachining process. The variation in resonance response of microcantilevers was investigated as a function of pressure 10−1-105 Pa, both in terms of resonance frequency and quality factor. A theoretical description of the resonating microstructure is given according to different molecular and viscous regimes. Also a brief discussion on the different quality factors contributions is presented. Theoretical and experimental data show a very satisfying agreement. The microstructure behavior demonstrates a certain sensitivity over a six decade range and the potential evolution of an absolute pressure sensor working in the same rang

Evidence for proton acceleration up to TeV energies based on VERITAS and Fermi-LAT observations of the Cas A SNR

We present a study of $\gamma$-ray emission from the core-collapse supernova remnant Cas~A in the energy range from 0.1GeV to 10TeV. We used 65 hours of VERITAS data to cover 200 GeV - 10 TeV, and 10.8 years of \textit{Fermi}-LAT data to cover 0.1-500 GeV. The spectral analysis of \textit{Fermi}-LAT data shows a significant spectral curvature around $1.3 \pm 0.4_{stat}$ GeV that is consistent with the expected spectrum from pion decay. Above this energy, the joint spectrum from \textit{Fermi}-LAT and VERITAS deviates significantly from a simple power-law, and is best described by a power-law with spectral index of $2.17\pm 0.02_{stat}$ with a cut-off energy of $2.3 \pm 0.5_{stat}$ TeV. These results, along with radio, X-ray and $\gamma$-ray data, are interpreted in the context of leptonic and hadronic models. Assuming a one-zone model, we exclude a purely leptonic scenario and conclude that proton acceleration up to at least 6 TeV is required to explain the observed $\gamma$-ray spectrum. From modeling of the entire multi-wavelength spectrum, a minimum magnetic field inside the remnant of $B_{\mathrm{min}}\approx150\,\mathrm{\mu G}$ is deduced.Comment: 33 pages, 9 Figures, 6 Table

Direct measurement of stellar angular diameters by the VERITAS Cherenkov Telescopes

The angular size of a star is a critical factor in determining its basic properties. Direct measurement of stellar angular diameters is difficult: at interstellar distances stars are generally too small to resolve by any individual imaging telescope. This fundamental limitation can be overcome by studying the diffraction pattern in the shadow cast when an asteroid occults a star, but only when the photometric uncertainty is smaller than the noise added by atmospheric scintillation. Atmospheric Cherenkov telescopes used for particle astrophysics observations have not generally been exploited for optical astronomy due to the modest optical quality of the mirror surface. However, their large mirror area makes them well suited for such high-time-resolution precision photometry measurements. Here we report two occultations of stars observed by the VERITAS Cherenkov telescopes with millisecond sampling, from which we are able to provide a direct measurement of the occulted stars' angular diameter at the $\leq0.1$ milliarcsecond scale. This is a resolution never achieved before with optical measurements and represents an order of magnitude improvement over the equivalent lunar occultation method. We compare the resulting stellar radius with empirically derived estimates from temperature and brightness measurements, confirming the latter can be biased for stars with ambiguous stellar classifications.Comment: Accepted for publication in Nature Astronom

Being resilient for society: evidence from companies that leveraged their resources and capabilities to fight the COVID-19 crisis

This study adopts a resilience perspective to explain how companies managed to contribute innovative solutions to fight the COVID-19 crisis. We studied how five companies operating in different industries (three in automotive, one in printing, and one in rubber and plastic products manufacturing) managed to reorganize activities and employ their R&D and innovation capabilities to enhance their resilience. Simultaneously, they increased the health system’s capacity to cope with the outbreak. Through a qualitative inductive study, based on interviews with company managers, we found that the firms mobilized their resources and capabilities to expand their ability to adapt and cope with adversity at the organizational level. In addition, moved by the sensitivity to the extreme context and a perceived sense of urgency, the firms deployed the same endowments to strengthen the community’s response to a crisis. Our study shows that an organization can directly and positively foster the broader social system’s resilience. This study contributes to the innovation literature by identifying innovation capabilities as fundamental antecedents of resilience building for organizational response, paving the way for strengthening the link between resilience and innovation

Boc-Protection on L-DOPA: an Easy Way to Promote Underwater Adhesion

The ability of mussels to adhere to underwater surfaces has attracted a lot of attention from the scientific community. As proteins containing L-DOPA (3,4-dihydroxyphenyl-l-alanine) are involved in their adhesion, a common strategy to synthesize adhesives is the incorporation of this amino acid into other compounds. Herein, we report a study on four compounds of the family of Bocx-(L-DOPA)n-OMe (x = 1–3; n = 1,2), that we prepared through simple synthetic steps. Three of them showed the capability of underwater adhesion: while they are not adhesive in the dry phase, the adhesiveness is triggered when the dried sample is immersed in water or any aqueous solutions. The introduction of protecting groups stabilizes L-DOPA, preventing the oxidation of the catechol moiety, and enhances the hydrophobicity, helping the removal of water from the surface to bind. These molecules show good adhesiveness, with different properties, so they may be all used as adhesives for different purposes. These outcomes pave the way for new applications for these materials as green and biocompatible adhesives

Epidemiology of legionnaires’ disease in italy, 2004–2019: A summary of available evidence

Legionnaires’ disease (LD) incidence has been increasing in several European countries since 2011. Currently, Italy is experiencing high notification rates for LD, whose cause still remains scarcely understood. We sought to summarize the available evidence on the epidemiology of LD in Italy (2004–2019), characterizing the risk of LD by region, sex, age group, and settings of the case (i.e., community, healthcare, or travel-associated cases). Environmental factors (e.g., average air temperatures and relative humidity) were also included in a Poisson regression model in order to assess their potential role on the annual incidence of new LD cases. National surveillance data included a total of 23554 LD cases occurring between 2004 and 2019 (70.4% of them were of male gender, 94.1% were aged 40 years and older), with age-adjusted incidence rates increasing from 1.053 cases per 100,000 in 2004 to 4.559 per 100,000 in 2019. The majority of incident cases came from northern Italy (43.2% from northwestern Italy, 25.6% from northeastern Italy). Of these, 5.9% were healthcare-related, and 21.1% were travel-associated. A case-fatality ratio of 5.2% was calculated for the whole of the assessed timeframe, with a pooled estimate for mortality of 0.122 events per 100,000 population per year. Poisson regression analysis was associated with conflicting results, as any increase in average air temperature resulted in reduced risk for LD cases (Incidence Rate Ratio [IRR] 0.807, 95% Confidence Interval [95% CI] 0.744–0.874), while higher annual income in older individ-uals was associated with an increased IRR (1.238, 95% CI 1.134–1.351). The relative differences in incidence between Italian regions could not be explained by demographic factors (i.e., age and sex distribution of the population), and also a critical reappraisal of environmental factors failed to sub-stantiate both the varying incidence across the country and the decennial trend we were able to identify

How diverse is your team? Investigating gender and nationality diversity in GitHub teams

Open Access: This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.Background Building an effective team of developers is a complex task faced by both software companies and open source communities. The problem of forming a “dream” team involves many variables, including consideration of human factors and it is not a dilemma solvable in a mathematical way. Empirical studies might provide interesting insights to explain which factors need to be taken into account in building a team of developers and which levers act to optimise productivity among developers. Aim In this paper, we present the results of an empirical study aimed at investigating the link between team diversity (i.e., gender, nationality) and productivity (issue fixing time). Method We consider issues solved from the GHTorrent dataset inferring gender and nationality of each team’s members. We also evaluate the politeness of all comments involved in issue resolution. Results Results show that higher gender diversity is linked with a lower team average issue fixing time (higher productivity), that nationality diversity is linked with lower team politeness and that gender diversity is linked with higher sentiment.Peer reviewedFinal Published versio

Technological Diversification and Strategic Alliances

This contribution examines empirically the relationship between the internal technological profile and the diversification through strategic alliances of the largest 219 industrial firms world-wide. It explores three related issues. First, the paper shows that firms? internal technological diversification is more pronounced than external technological diversification. Second, it confirms the idea that technological diversification is more pronounced than product and market diversification. Finally, by means of multiple correlation analysis, this work studies the relationship between firms? economic performance, internal technological diversification and diversification through strategic alliances. The empirical investigation combines firm level data on US patents, strategic technological alliances, production and marketing alliances, and firms' economic performances