Binding Mechanisms in Selective Laser Sintering and Selective Laser Melting

Layer Manufacturing (LM) technologies like Selective Laser Sintering (SLS) were developed in the late 80’s as techniques for Rapid Prototyping (RP). Today, SLS - as well as its derived technology Selective Laser Melting (SLM) - is used as well for prototyping, tooling and manufacturing purposes. This widening of applications is caused mainly by the possibility to process a large variety of materials, resulting in a broad range of physical and mechanical properties. This paper presents a survey of the various binding mechanisms in SLS and SLM, which are responsible for the broad range of materials and applications. Basic binding mechanisms involve solid state sintering, chemically induced binding, liquid phase sintering, partial melting and full melting. Many subcategories can be distinguished based on the type of structural or binder powder composition: single component powder grains (single material or alloy), composite powder grains, mixtures of different powder grains, distinct binder material (sacrificial or permanent), etc. The paper will explain how these binding mechanisms apply for sintering various types of materials: plastics, metal, ceramics and composites (e.g. glass reinforced polymers, cermets, hardmetals, etc.). It gives a survey of research done at the University of Leuven, Belgium, as well as at other European and non-European organizations.Mechanical Engineerin

Investigating the melt pool properties and thermal effects of multi-laser diode area melting

Diode area melting (DAM) is a new additive manufacturing process that utilises customised architectural arrays of low-power laser diode emitters for high-speed parallel processing of metallic feedstock. The laser diodes operate at shorter laser wavelengths (808 nm) than conventional SLM fibre lasers (1064 nm) theoretically enabling more efficient energy absorption for specific materials. This investigation presents the first work investigating the melt pool properties and thermal effects of the multi-laser DAM process, modelling generated melt pools the unique thermal profiles created along a powder bed during processing. Using this approach process, optimisation can be improved by analysing this thermal temperature distribution, targeting processing conditions that induce full melting for variable powder layer thicknesses. In this work, the developed thermal model simulates the DAM processing of 316L stainless steel and is validated with experimental trials. The simulation indicates that multi-laser DAM methodology can reduce residual stress formation compared to the single point laser scanning methods used during selective laser melting

Tailoring the thermal conductivity of the powder bed in Electron Beam Melting (EBM) Additive Manufacturing

Metallic powder bed additive manufacturing is capable of producing complex, functional parts by repeatedly depositing thin layers of powder particles atop of each other whilst selectively melting the corresponding part cross-section into each layer. A weakness with this approach arises when melting overhanging features, which have no prior melted material directly beneath them. This is due to the lower thermal conductivity of the powder relative to solid material, which as a result leads to an accumulation of heat and thus distortion. The Electron Beam Melting (EBM) process alleviates this to some extent as the powder must first be sintered (by the beam itself) before it is melted, which results in the added benefit of increasing the thermal conductivity. This study thus sought to investigate to what extent the thermal conductivity of local regions in a titanium Ti-6Al-4V powder bed could be varied by imparting more energy from the beam. Thermal diffusivity and density measurements were taken of the resulting sintered samples, which ranged from being loosely to very well consolidated. It was found that the calculated thermal conductivity at two temperatures, 40 and 730 °C, was more than doubled over the range of input energies explored

Processing Parameter Effects on Residual Stress and Mechanical Properties of Selective Laser Melted Ti6Al4V

Selective laser melting (SLM) process is characterized by large temperature gradients resulting in high levels of residual stress within the additively manufactured metallic structure. SLM-processed Ti6Al4V yields a martensitic microstructure due to the rapid solidification and results in a ductility generally lower than a hot working equivalent. Post-process heat treatments can be applied to SLM components to remove in-built residual stress and improve ductility. Residual stress buildup and the mechanical properties of SLM parts can be controlled by varying the SLM process parameters. This investigation studies the effect of layer thickness on residual stress and mechanical properties of SLM Ti6Al4V parts. This is the first-of-its kind study on the effect of varying power and exposure in conjunction with keeping the energy density constant on residual stress and mechanical properties of SLM Ti6Al4V components. It was found that decreasing power and increasing exposure for the same energy density lowered the residual stress and improved the % elongation of SLM Ti6Al4V parts. Increasing layer thickness resulted in lowering the residual stress at the detriment of mechanical properties. The study is based on detailed experimental analysis along with finite element simulation of the process using ABAQUS to understand the underlying physics of the process