Design of an Automated Ultrasonic Scanning System for In-Situ Composite Cure Monitoring and Defect Detection

The preliminary design and development of an automated ultrasonic scanning system for in-situ composite cure monitoring and defect detection in the high temperature environment of an oven was completed. This preliminary design is a stepping stone to deployment in the high temperature and high pressure environment of an autoclave, the primary cure method of aerospace grade thermoset composites. Cure monitoring with real-time defect detection during the process could determine when defects form and how they move. In addition, real-time defect detection during cure could assist validating physics-based process models for predicting defects at all stages of the cure cycle. A physics-based process model for predicting porosity and fiber waviness originating during cure is currently under development by the NASA Advanced Composites Project (ACP). For the design, an ultrasonic contact scanner is enclosed in an insulating box that is placed inside an oven during cure. Throughout the cure cycle, the box is nitrogen-cooled to approximately room temperature to maintain a standard operating environment for the scanner. The composite part is mounted on the outside of the box in a vacuum bag on the build/tool plate. The build plate is attached to the bottom surface of the box. The scanner inspects the composite panel through the build plate, tracking the movement of defects introduced during layup and searching for new defects that may form during cure. The focus of this paper is the evaluation and selection of the build plate material and thickness. The selection was based on the required operating temperature of the scanner, the cure temperature of the composite material, thermal conductivity models of the candidate build plates, and a series of ultrasonic attenuation tests. This analysis led to the determination that a 63.5 mm thick build plate of borosilicate glass would be utilized for the system. The borosilicate glass plate was selected as the build plate material due to the low ultrasonic attenuation it demonstrated, its ability to efficiently insulate the scanner while supporting an elevated temperature on the part side of the plate, and the availability of a 63.5 mm thick plate without the need for lamination

Development and evaluation of lessons in socialized learning for grade I: volumes I-II

Thesis (Ed.M.)--Boston Universit

Self-Assembly of Polyhedral Hybrid Colloidal Particles

We have developed a new method to produce hybrid particles with polyhedral shapes in very high yield (liter quantities at up to 70% purity) using a combination of emulsion polymerization and inorganic surface chemistry. The procedure has been generalized to create complex geometries, including hybrid line segments, triangles, tetrahedra, octahedra, and more. The optical properties of these particles are tailored for studying their dynamics and self-assembly. For example, we produce systems that consist of index-matched spheres allowing us to define the position of each elementary particle in three-dimensional space. We present some preliminary studies on the self-assembly of these complex shaped systems based on electron and optical microscopy.Engineering and Applied SciencesPhysic

Neoadjuvant chemotherapy and trastuzumab versus neoadjuvant chemotherapy followed by post-operative trastuzumab for patients with HER2-positive breast cancer

Neoadjuvant chemotherapy plus trastuzumab (NCT) increases the rate of pathological complete response (pCR) and event-free survival (EFS) compared to neoadjuvant chemotherapy (NC) alone in women with HER2 positive breast cancer (BC). pCR in this setting is associated with improved EFS. Whether NCT preferentially improves EFS in comparison to NC followed by adjuvant trastuzumab initiated postoperatively (NCAT) has not been addressed. Using clinical data from women with HER2 positive BC treated at 7 European institutions between 2007 and 2010 we sought to investigate the impact on breast cancer outcomes of concomitant (NCT) versus sequential (NCAT) treatment in HER2 positive early BC. The unadjusted hazard ratio (HR) for event free survival with NCT compared with NCAT was 0.63 (95% CI 0.37–1.08; p = 0.091). Multivariable analysis revealed that treatment group, tumour size and ER status were significantly associated with EFS from diagnosis. In the whole group NCT was associated with a reduced risk of an event relative to NCAT, an effect that was confined to ER negative (HR: 0.25; 95% CI, 0.10–0.62; p = 0.003) as opposed to ER positive tumours (HR: 1.07; 95% CI, 0.46–2.52; p = 0.869). HER2 positive/ER negative BC treated with NC gain greatest survival benefit when trastuzumab is administered in both the neoadjuvant and adjuvant period rather than in the adjuvant period alone. These data support the early introduction of targeted combination therapy in HER2 positive/ER negative BC

Unconditionally Secure Oblivious Transfer from Real Network Behavior

Secure multi-party computation (MPC) deals with the problem of shared computation between parties that do not trust each other: they are interested in performing a joint task, but they also want to keep their respective inputs private. In a world where an ever-increasing amount of computation is outsourced, for example to the cloud, MPC is a subject of crucial importance. However, unconditionally secure MPC protocols have never found practical application: the lack of realistic noisy channel models, that are required to achieve security against computationally unbounded adversaries, prevents implementation over real-world, standard communication protocols. In this paper we show for the first time that the inherent noise of wireless communication can be used to build multi-party protocols that are secure in the information-theoretic setting. In order to do so, we propose a new noisy channel, the Delaying-Erasing Channel (DEC), that models network communication in both wired and wireless contexts. This channel integrates erasures and delays as sources of noise, and models reordered, lost and corrupt packets. We provide a protocol that uses the properties of the DEC to achieve Oblivious Transfer (OT), a fundamental primitive in cryptography that implies any secure computation. In order to show that the DEC reflects the behavior of wireless communication, we run an experiment over a 802.11n wireless link, and gather extensive experimental evidence supporting our claim. We also analyze the collected data in order to estimate the level of security that such a network can provide in our model. We show the flexibility of our construction by choosing for our implementation of OT a standard communication protocol, the Real-time Transport Protocol (RTP). Since the RTP is used in a number of multimedia streaming and teleconference applications, we can imagine a wide variety of practical uses and application settings for our construction

Titanium Nitride Coating of RF Ceramic Windows by Reactive DC Magnetron Sputtering

International audienceLAL-Orsay is developing an important effort on R&D and technology studies on RF power couplers for superconductive cavities. These are complex and high technology devices due to their basic functions: vacuum and temperature separation form the environment to the cavity. One of the most critical components of high power couplers is the ceramic RF window that allows the power flux to be injected in the coaxial line. The presence of a dielectric window on a high power RF line has in fact a strong influence on the multipactor phenomena, a resonant electron discharge that is strongly limiting for the RF components performances. The most important method to reduce the multipactor is to decrease the secondary emission yield of the ceramic window. Due to its low secondary electron emission coefficient, TiN thin film is used as a multipactor suppressor coating on RF ceramic coupler windows. In the framework of the EU program FP6 the LAL-Orsay and the LNL-Legnaro establish a collaboration to develop a coating bench that takes into account the different strong constraints on stoechiometry and film coating thickness given by coupler operating conditions. Reactive magnetron sputtering technology was chosen to obtain such deposit. A full description of a sputtering bench recently installed in LAL, and its main characteristics are given. Stoechiometric TiN films are obtained by optimization of reactive gas flow (N2), for a given bias and a given ionisation gas flow (Ar). XRD analysis was performed to control film composition. From the data obtained, lattice parameter is calculated for each deposit and film stoechiometry is determined. XPS analysis of stoechiometric film had shown the existence of oxygen and carbon mainly in the surface. However, it shows also that the ratio Ti/N in atomic percentage is equal to 1

A Meta-Analysis of Genome-Wide Association Scans Identifies IL18RAP, PTPN2, TAGAP, and PUS10 As Shared Risk Loci for Crohn's Disease and Celiac Disease

This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited

Preserving Context Privacy in Distributed Hash Table Wireless Sensor Networks.

Wireless Sensor Networks (WSN) are often deployed in hostile or difficult scenarios, such as military battlefields and disaster recovery, where it is crucial for the network to be highly fault tolerant, scalable and decentralized. For this reason, peer-to-peer primitives such as Distributed Hash Table (DHT), which can greatly enhance the scalability and resilience of a network, are increasingly being introduced in the design of WSN's. Securing the communication within the WSN is also imperative in hostile settings. In particular, context information, such as the network topology and the location and identity of base stations (which collect data gathered by the sensors and are a central point of failure) can be protected using traffic encryption and anonymous routing. In this paper, we propose a protocol achieving a modified version of onion routing over wireless sensor networks based on the DHT paradigm. The protocol prevents adversaries from learning the network topology using traffic analysis, and therefore preserves the context privacy of the network. Furthermore, the proposed scheme is designed to minimize the computational burden and power usage of the nodes, through a novel partitioning scheme and route selection algorithm

Impact of remnant vital tissue after locoregional treatment and liver transplant in hepatocellular cancer patients. A multicentre cohort study

The role of pathological findings after locoregional treatments as predictors of hepatocellular cancer recurrence after liver transplantation has been poorly addressed. The aim of the study was to identify the role of remnant vital tissue (RVT) of the target lesion in predicting hepatocellular cancer recurrence. Two hundred and seventy-six patients firstly undergoing locoregional treatment and then transplanted between January 2010 and December 2015 in four European Transplant Centres (i.e. Rome Tor Vergata, Birmingham, Brussels and Ancona) were enrolled in the study to investigate the role of pathological response at upfront locoregional treatment. At multivariable Cox regression analysis, RVT ≥2 cm was a strong independent risk factor for post-LT recurrence (HR = 5.6; P < 0.0001). Five-year disease-free survival rates were 60.8%, 80.9% and 95.0% in patients presenting a RVT ≥2 cm vs. 0.1-1.9 vs. no RVT, respectively. When only Milan Criteria-IN patients were analysed, similar results were reported, with 5-year disease-free survival rates of 58.1%, 79.0% and 94.0% in patients presenting a RVT ≥2 cm vs. 0.1-1.9 vs. no RVT, respectively. RVT is an important determinant of tumour recurrence after liver transplantation performed for hepatocellular cancer. Its discriminative power looks to be evident also in a Milan-IN setting, suggesting to more liberally use locoregional treatments also in these patients