Organic farming without fossil fuels - life cycle assessment of two Swedish cases

Organic agriculture is dependent on fossil fuels, just like conventional agriculture, but this can be reduced by the use of on-farm biomass resources. The energy efficiency and environmental impacts of different alternatives can be assessed by life cycle assessment (LCA), which we have done in this project. Swedish organic milk production can become self-sufficient in energy by using renewable sources available on the farm, with biogas from manure as the main energy source. Thereby greenhouse gas (GHG) emissions from the production system can be reduced, both by substituting fossil fuels and by reducing methane emissions from manure. The arable organic farm studied in the project could be self-sufficient in energy by using the residues available in the crop rotation. Because of soil carbon losses, the greenhouse gas emission savings were lower with the use of straw ethanol, heat and power (9%) than by using ley for biogas production (35%). In this research project, the system boundaries were set at energy self-sufficiency at farm or farm-cluster level. Heat and fuel were supplied as needed, and electricity production was equal to use on an annual basis. In practice, however, better resource efficiency can be achieved by making full use of available energy infrastructure, and basing production on resource availability and economic constraints, rather than a narrow self-sufficiency approach

Biomechanical determination of distal level for fusions across the cervicothoracic junction

Study Design In vitro testing. Objective To determine whether long cervical and cervicothoracic fusions increase the intradiscal pressure at the adjacent caudal disk and to determine which thoracic end vertebra causes the least increase in the adjacent-level intradiscal pressure. Methods A bending moment was applied to six cadaveric cervicothoracic spine specimens with intact rib cages. Intradiscal pressures were recorded from C7–T1 to T9–10 before and after simulated fusion by anterior cervical plating and posterior thoracic pedicle screw constructs. The changes in the intradiscal pressure from baseline were calculated and compared. Results No significant differences where found when the changes of the juxtafusion intradiscal pressure at each level were compared for the flexion, extension, and left and right bending simulations. However, combining the pressures for all directions of bending at each level demonstrated a decrease in the pressures at the T2–T3 level. Exploratory analysis comparing changes in the pressure at T2–T3 to other levels showed a significant decrease in the pressures at this level (p = 0.005). Conclusions Based on the combined intradiscal pressures alone it may be advantageous to end long constructs spanning the cervicothoracic junction at the T2 level if there are no other mitigating factors

Treatment with an Anti-CD44v10-Specific Antibody Inhibits the Onset of Alopecia Areata in C3H/HeJ Mice

A murine CD44v10-neutralizing antibody has been reported to impair delayed-type hypersensitivity reactions. Because alopecia areata is characterized by a delayed-type hypersensitivity-like T cell mediated immune response, we addressed the question whether an anti-CD44v10-antibody influences the onset of alopecia areata. Therefore, we used the C3H/HeJ mouse model with the induction of alopecia areata in unaffected mice by the grafting of lesional alopecia areata mouse skin. Six grafted mice were injected (intraperitoneally) with anti-CD44v10, six grafted mice with anti-CD44standard, and six with phosphate-buffered saline only. After 11 wk phosphate-buffered saline injected animals on average had developed alopecia areata on 36.8% of their body. The onset of hair loss was slightly delayed and its extent reduced to 17.2% of their body in anti-CD44standard-treated mice. By contrast, five of six anti-CD44v10-treated mice did not show any hair loss and one mouse developed alopecia areata on only 1% of the body. Immunohistochemical examination revealed a marked reduction of perifollicular CD8+ lymphocytes and, to a lesser degree, CD4+ cells as well as a decreased expression of major histocompatibility complex class I on hair follicle epithelium in anti-CD44v10-treated mice as compared with phosphate-buffered saline or anti-CD44 standard-treated mice. Our data show that anti-CD44v10 is able to inhibit the onset of alopecia areata in C3H/HeJ mice. This might be accomplished by an anti-CD44v10-triggered impairment of immune cell homing (e.g., CD8+ T cells), resulting in a decrease of their number in target tissues

Flanging and Hemming of Auto Body Panels using the Electro Magnetic Forming technology

Electro Magnetic Forming (EMF) technology has a great number of potential applications for the automotive industry. LABEIN-Tecnalia has worked with this technology for six years and has a good understanding of the automotive industry s needs and challenges. LABEIN-Tecnalia is currently developing new applications with EMF technology. Taking into account the advantages and limitations of EMF, bending and hemming processes present good geometric conditions for the use of this technology. The study presented is based largely on hemming circular configurations which are simplifications of those commonly used on hemmed automotive parts. The parameters of this new EMF bending and hemming processes have been studied, as well as their influence on the final quality of the parts obtained. Conclusions obtained from the basic geometries were tested on a more complicated geometry in order to apply the knowledge acquired. Parallel to the experimental work, fully coupled electromechanical software by LS-DYNA has been used to simulate and extend the present hemming results

Changing musical emotion: A computational rule system for modifying score and performance

CMERS system architecture has been implemented in the programming language scheme, and it uses the improvised music programming environment with the objective to provide researchers with a tool for testing the relationships between musical features and emotion. A music work represented in CMERS uses the music object hierarchy that is based on GTTM's grouping structure and is automatically generated from the phrase boundary markup and MIDI file. The Mode rule type of CMERS converts a note into those of the parallel mode and no change in pitch height occurs when converting to the parallel mode. It is reported that the odds of correctness with CMERS are approximately five times greater than that of DM. The repeated-measures analysis of variance for valence shows a significant difference between systems with F (1, 17) = 45.49, p < .0005 and the interaction between system and quadrant is significant with F (3, 51) = 4.23, p = .01, which indicates that CMERS is extensively more effective at correctly influencing valence than DM. c 2010 Massachusetts Institute of Technology