Permafrost - physical aspects and carbon cycling, databases and uncertainties

Permafrost is defined as ground that remains below 0°C for at least 2 consecutive years. About 24% of the northern hemisphere land area is underlain by permafrost. The thawing of permafrost has the potential to influence the climate system through the release of carbon (C) from northern high latitude terrestrial ecosystems, but there is substantial uncertainty about the sensitivity of the C cycle to thawing permafrost. Soil C can be mobilized from permafrost in response to changes in air temperature, directional changes in water balance, fire, thermokarst, and flooding. Observation networks need to be implemented to understand responses of permafrost and C at a range of temporal and spatial scales. The understanding gained from these observation networks needs to be integrated into modeling frameworks capable of representing how the responses of permafrost C will influence the trajectory of climate in the future

Rubber friction: role of the flash temperature

When a rubber block is sliding on a hard rough substrate, the substrate asperities will exert time-dependent deformations of the rubber surface resulting in viscoelastic energy dissipation in the rubber, which gives a contribution to the sliding friction. Most surfaces of solids have roughness on many different length scales, and when calculating the friction force it is necessary to include the viscoelastic deformations on all length scales. The energy dissipation will result in local heating of the rubber. Since the viscoelastic properties of rubber-like materials are extremely strongly temperature dependent, it is necessary to include the local temperature increase in the analysis. At very low sliding velocity the temperature increase is negligible because of heat diffusion, but already for velocities of order 0.01 m/s the local heating may be very important. Here I study the influence of the local heating on the rubber friction, and I show that in a typical case the temperature increase results in a decrease in rubber friction with increasing sliding velocity for v > 0.01 m/s. This may result in stick-slip instabilities, and is of crucial importance in many practical applications, e.g., for the tire-road friction, and in particular for ABS-breaking systems.Comment: 22 pages, 27 figure

The myocardium and its fibrous matrix working in concert as a spatially netted mesh: a critical review of the purported tertiary structure of the ventricular mass

With the increasing interest now paid to volume reduction surgery, in which the cardiac surgeon is required to resect the ventricular myocardium to an extent unenvisaged in the previous century, it is imperative that we develop as precise knowledge as is possible of the basic structure of the ventricular myocardial mass and its functional correlates. This is the most important in the light of the adoption by some cardiac surgeons of an unvalidated model which hypothesises that the entire myocardial mass can be unravelled to produce one continuous band. It is our opinion that this model, and the phylogenetic and functional correlates derived from it, is incompatible with current concepts of cardiac structure and cardiodynamics. Furthermore, the proponents of the continuous myocardial band have made no effort to demonstrate perceived deficiencies with current concepts, nor have they performed any histological studies to validate their model. Clinical results using modifications of radius reduction surgery based on the concept of the continuous myocardial band show that the procedure essentially becomes ineffective. As we show in this review, if we understand the situation correctly, it was the erstwhile intention of the promoters of the continuous band to elucidate the basic mechanism of diastolic ventricular dilation. Their attempts, however, are doomed to failure, as is any attempt to conceptualise the myocardial mass on the basis of a tertiary structure, because of the underlying three-dimensional netting of the myocardial aggregates and the supporting fibrous tissue to form the myocardial syncytium. Thus, the ventricular myocardium is arranged in the form of a modified blood vessel rather than a skeletal muscle. If an analogy is required with skeletal muscle, then the ventricular myocardium possesses the freedom of motion, and the ability for shaping and conformational self-controlling that is better seen in the tongue. It is part of this ability that contributes to the rapid end-systolic ventricular dilation. Histologic investigations reveal that the fibrous content of the three-dimensional mesh is relatively inhomogeneous through the ventricular walls, particularly when the myocardium is diseased. The regional capacity to control systolic mural thickening, therefore, varies throughout the walls of the ventricular components. The existence of the spatially netted structure of the ventricular mass, therefore, must invalidate any attempt to conceptualise the ventricular myocardium as a tertiary arrangement of individual myocardial bands or tract

Paying the Guard: An Entry-Guard-Based Payment System for Tor

When choosing the three relays that compose a circuit, Tor selects the first hop among a restricted number of relays called entry guards, pre-selected by the user himself. The reduced number of entry guards, that until recently was fixed to three, helps in mitigating the effects of several traffic analysis attacks. However, recent literature indicates that the number should be further reduced, and the time during which the user keeps the relays as guards increased. Therefore, developers of Tor recently proposed selecting only one entry guard, which is to be used by the user for all circuits and for a prolonged period of time (nine months). While this design choice was made to increase the security of the protocol, it also opens an unprecedented opportunity for a market mechanism where relays get paid for traffic by the users. In this paper, we propose to use the entry guard as the point-of-sale: users subscribe to their entry guard of choice, and deposit an amount that will be used for paying for the circuits. From the entry guard, income is then distributed to the other relays included in circuits through an inter-relay accounting system. While the user may pay the entry guard using BitCoins, or any other anonymous payment system, the relays exchange I Owe You (IOU) certificates during communication, and settle their balances only at synchronized, later points in time. This novel deferred payment approach overcomes the weaknesses of the previously proposed Tor payment mechanisms: we separate the user’s payment from the inter-relay payments, and we effectively unlink both from the chosen path, thus preserving the secrecy of the circuit

Proteinase-activated receptor 2 (PAR2) in hepatic stellate cells – evidence for a role in hepatocellular carcinoma growth in vivo

Background Previous studies have established that proteinase-activated receptor 2 (PAR2) promotes migration and invasion of hepatocellular carcinoma (HCC) cells, suggesting a role in HCC progression. Here, we assessed the impact of PAR2 in HCC stromal cells on HCC growth using LX-2 hepatic stellate cells (HSCs) and Hep3B cells as model. Methods PAR2 expression and function in LX-2 cells was analysed by RT-PCR, confocal immunofluorescence, electron microscopy, and [Ca2+]i measurements, respectively. The impact of LX-2-expressed PAR2 on tumour growth in vivo was monitored using HCC xenotransplantation experiments in SCID mice, in which HCC-like tumours were induced by coinjection of LX-2 cells and Hep3B cells. To characterise the effects of PAR2 activation in LX-2 cells, various signalling pathways were analysed by immunoblotting and proteome profiler arrays. Results Following verification of functional PAR2 expression in LX-2 cells, in vivo studies showed that these cells promoted tumour growth and angiogenesis of HCC xenografts in mice. These effects were significantly reduced when F2RL1 (encoding PAR2) was downregulated by RNA interference (RNAi). In vitro studies confirmed these results demonstrating RNAi mediated inhibition of PAR2 attenuated Smad2/3 activation in response to TGF-β1 stimulation in LX-2 cells and blocked the pro-mitotic effect of LX-2 derived conditioned medium on Hep3B cells. Furthermore, PAR2 stimulation with trypsin or a PAR2-selective activating peptide (PAR2-AP) led to activation of different intracellular signalling pathways, an increased secretion of pro-angiogenic and pro-mitotic factors and proteinases, and an enhanced migration rate across a collagen- coated membrane barrier. Silencing F2RL1 by RNAi or pharmacological inhibition of Src, hepatocyte growth factor receptor (Met), platelet-derived growth factor receptor (PDGFR), p42/p44 mitogen activated protein kinase (MAPK) or matrix-metalloproteinases (MMPs) blocked PAR2-AP-induced migration. Conclusion PAR2 in HSCs plays a crucial role in promoting HCC growth presumably by mediating migration and secretion of pro-angiogenic and pro-mitotic factors. Therefore, PAR2 in stromal HSCs may have relevance as a therapeutic target of HCC

Tube Models for Rubber-Elastic Systems

In the first part of the paper we show that the constraining potentials introduced to mimic entanglement effects in Edwards' tube model and Flory's constrained junction model are diagonal in the generalized Rouse modes of the corresponding phantom network. As a consequence, both models can formally be solved exactly for arbitrary connectivity using the recently introduced constrained mode model. In the second part, we solve a double tube model for the confinement of long paths in polymer networks which is partially due to crosslinking and partially due to entanglements. Our model describes a non-trivial crossover between the Warner-Edwards and the Heinrich-Straube tube models. We present results for the macroscopic elastic properties as well as for the microscopic deformations including structure factors.Comment: 15 pages, 8 figures, Macromolecules in pres

Addressing the nitrogen problem in sugarcane production to reduce pollution of the Great Barrier Reef

The N pollution footprint of sugarcane cropping is large due to inefficiencies caused by mismatched N supply and crop N demand over sugarcane’s long N accumulation phase. The Great Barrier Reef lagoon receives excessive N loads that contribute to the rapidly declining reef health. Exceeding international average nitrous oxide emission rates several fold, sugarcane soils contribute significantly to Australia’s agricultural emissions. Nitrogen pollution reduction schemes over recent decades have mostly targeted reducing N fertiliser rates in line with expected yields and improving soil quality. Overall, these measures have not resulted in the desired N pollution reduction and further innovation is needed to address this problem. We present research that aims to aid agronomic innovation with (i) next-generation fertilisers that are based on repurposed nutrient-rich wastes and sorbent materials to better match N supply and crop demand and to improve soil function and carbon levels, (ii) understanding of soil N cycling and microbial processes, (iii) legume companion cropping as a source of biologically fixed N, and (iv) genetic improvement of sugarcane that more effectively captures and uses N. We conclude that evidence-based innovation has to support crop growers across climate and soil gradients in the 400,000 hectares of catchments of the Great Barrier Reef. This should include investment into new technologies to support ecologically-sound agriculture and a circular economy without waste and pollution

On the nature of surface roughness with application to contact mechanics, sealing, rubber friction and adhesion

Surface roughness has a huge impact on many important phenomena. The most important property of rough surfaces is the surface roughness power spectrum C(q). We present surface roughness power spectra of many surfaces of practical importance, obtained from the surface height profile measured using optical methods and the Atomic Force Microscope. We show how the power spectrum determines the contact area between two solids. We also present applications to sealing, rubber friction and adhesion for rough surfaces, where the power spectrum enters as an important input.Comment: Topical review; 82 pages, 61 figures; Format: Latex (iopart). Some figures are in Postscript Level

A database of whole-body action videos for the study of action, emotion, and untrustworthiness

We present a database of high-definition (HD) videos for the study of traits inferred from whole-body actions. Twenty-nine actors (19 female) were filmed performing different actions—walking, picking up a box, putting down a box, jumping, sitting down, and standing and acting—while conveying different traits, including four emotions (anger, fear, happiness, sadness), untrustworthiness, and neutral, where no specific trait was conveyed. For the actions conveying the four emotions and untrustworthiness, the actions were filmed multiple times, with the actor conveying the traits with different levels of intensity. In total, we made 2,783 action videos (in both two-dimensional and three-dimensional format), each lasting 7 s with a frame rate of 50 fps. All videos were filmed in a green-screen studio in order to isolate the action information from all contextual detail and to provide a flexible stimulus set for future use. In order to validate the traits conveyed by each action, we asked participants to rate each of the actions corresponding to the trait that the actor portrayed in the two-dimensional videos. To provide a useful database of stimuli of multiple actions conveying multiple traits, each video name contains information on the gender of the actor, the action executed, the trait conveyed, and the rating of its perceived intensity. All videos can be downloaded free at the following address: http://www-users.york.ac.uk/~neb506/databases.html. We discuss potential uses for the database in the analysis of the perception of whole-body actions