Unsteady transonic flow in cascades

There is a need for methods to predict the unsteady air loads associated with flutter of turbomachinery blading at transonic speeds. The results of such an analysis in which the steady relative flow approaching a cascade of thin airfoils is assumed to be transonic, irrotational, and isentropic is presented. The blades in the cascade are allowed to undergo a small amplitude harmonic oscillation which generates a small unsteady flow superimposed on the existing steady flow. The blades are assumed to oscillate with a prescribed motion of constant amplitude and interblade phase angle. The equations of motion are obtained by linearizing about a uniform flow the inviscid nonheat conducting continuity and momentum equations. The resulting equations are solved by employing the Weiner Hopf technique. The solution yields the unsteady aerodynamic forces acting on the cascade at Mach number equal to 1. Making use of an unsteady transonic similarity law, these results are compared with the results obtained from linear unsteady subsonic and supersonic cascade theories. A parametric study is conducted to find the effects of reduced frequency, solidity, stagger angle, and position of pitching axis on the flutter

Influence of Hydrodynamic Interactions on the Kinetics of Colloidal Particle's Adsorption

The kinetics of irreversible adsorption of spherical particles onto a flat surface is theoretically studied. Previous models, in which hydrodynamic interactions were disregarded, predicted a power-law behavior $t^{-2/3}$ for the time dependence of the coverage of the surface near saturation. Experiments, however, are in agreement with a power-law behavior of the form $t^{-1/2}$. We outline that, when hydrodynamic interactions are considered, the assymptotic behavior is found to be compatible with the experimental results in a wide region near saturation.Comment: 4 pages, 1 figures, Phys. Rev. Lett. (in press

The rapidity dependence of the proton-to-pion ratio in Au+Au and p+p collisions at sqrt(sNN) = 62.4 and 200 GeV

The BRAHMS measured proton-to-pion ratios in Au+Au and p+p collisions at \rootsnn{62.4} and \rootsnn{200} are presented as a function of transverse momentum and collision centrality within the pseudo-rapidity range 0 < eta < 3.8 The results for Au+Au at sqrt(sNN) = 200 GeV are compared with predictions from models which incorporate hydro-dynamics, hadron rescattering and jet production, in the eta interval covered. In Au+Au collisions at sqrt(sNN) = 200 GeV, eta ~ 2.2, and at sqrt(sNN) = 62.4 GeV, eta = 0, the bulk medium can be characterized by the common value of \mi_B ~ 65 MeV. The p/pi ratios measured for these two selections display a striking agreement in the pT range covered (up to 2.2 GeV/c). At a collision energy of 62.4 GeV and at forward pseudo-rapidity we found a crossing point of p/pi+ ratios measured in central and semi-peripheral Au+Au and in p+p reactions. The crossing occurs in the narrow eta bin around value of 3.2, simultaneously in the whole covered pT range (0.3 GeV/c < pT < 2 GeV/c).Comment: 4 pages, 4 figures - To appear in the conference proceedings for Quark Matter 2009, March 30 - April 4, Knoxville, Tennessee Included corrections indicated in internal review report. Minor correction to Fig.

Comparison of Grain Refinement in Selected Materials Subjected to Hydrostatic Extrusion

The subject of this study was to examine and compare the impact of intense hydrostatic extrusion on grain refinement in three different alloys: duplex stainless steel, commercially used aluminum alloy (6060) and Ag-Cu12 alloy. As a result of the process grain sizes from 370 nm to 90 nm were obtained in aluminum and duplex steel. To analyze the of hydrostatic on mechanical properties tensile tests were also carried out. The highest grain refinement (70 nm) and yield strength increase (over 300%) was observed in duplex steel af-ter hydrostatic extrusion. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/3560

Urological procedures in Central Europe and the current reality based on the national registries of Czech Republic, Hungary, and Poland (2012 status)

INTRODUCTION: In recent years, the laparoscopic approach in oncologic urology seems more attractable to the surgeons. It is considered to have the same oncologic quality as open surgery, but is less invasive in patients. It is used widely in all of Europe, but with various frequency. The aim of the study was to present a various amount of oncourological procedures from three neighbouring countries - Poland, Czech Republic and Hungary. Prostatectomy, cystectomy, nephrectomy and tumorectomy (Nephron Sparing Procedures - NSS) were presented as a list of procedures prepared from the national registry. MATERIAL AND METHODS: The total amount of procedures was presented, as well as the LO (Lap to Open procedures) index, P/P (procedures/population) index, ratio of cystectomy/population, and cystectomy/TURBT. RESULTS: In the Czech Republic, the most complex procedures are performed (laparoscopic/robotic prostatectomy, NSS LAP, LAP nephrectomy) in the majority when analysing the country's population. In Hungary and Czech Republic, there are more laparoscopic/robotic radical prostatectomies performed, than open ones. In Poland the largest number of cystectomies is performed when analysing the country's population, but it is difficult to explain the much higher ratio of 6.57 TUR/one cystectomy. In the Czech Republic this procedure is performed in almost one quarter of the patients (23.36%). Interestingly, in Hungary the cystectomy with pouch creation is performed in about 67.65% cases. The highest reimbursement for surgical procedure is present in the Czech Republic with approximately 20-40% more than when compared to Poland or Hungary. CONCLUSIONS: The definitive leader in Central Europe (based on the national registry) is the Czech Republic, where the most complex procedures are performed (laparoscopic/robotic prostatectomy, NSS LAP, LAP nephrectomy) in biggest amounts when analysing the country's population. Explanation of such circumstances, can be the higher reimbursement rate for surgical procedure in this country

Model of correlated sequential adsorption of colloidal particles

We present results of a new model of sequential adsorption in which the adsorbing particles are correlated with the particles attached to the substrate. The strength of the correlations is measured by a tunable parameter $\sigma$. The model interpolates between free ballistic adsorption in the limit $\sigma\to\infty$ and a strongly correlated phase, appearing for $\sigma\to0$ and characterized by the emergence of highly ordered structures. The phenomenon is manifested through the analysis of several magnitudes, as the jamming limit and the particle-particle correlation function. The effect of correlations in one dimension manifests in the increased tendency to particle chaining in the substrate. In two dimensions the correlations induce a percolation transition, in which a spanning cluster of connected particles appears at a certain critical value $\sigma_c$. Our study could be applicable to more general situations in which the coupling between correlations and disorder is relevant, as for example, in the presence of strong interparticle interactions.Comment: 6 pages, 8 EPS figures. Phys. Rev. E (in press

Utilization of parallel processing in solving the inviscid form of the average-passage equation system for multistage turbomachinery

A procedure is outlined which utilizes parallel processing to solve the inviscid form of the average-passage equation system for multistage turbomachinery along with a description of its implementation in a FORTRAN computer code, MSTAGE. A scheme to reduce the central memory requirements of the program is also detailed. Both the multitasking and I/O routines referred to are specific to the Cray X-MP line of computers and its associated SSD (Solid-State Disk). Results are presented for a simulation of a two-stage rocket engine fuel pump turbine

The impact of health on professionally active people's incomes in Poland. Microeconometric analysis

The outcome of the research confirms the occurrence of positive interaction between professionally active people's incomes and the self-assessed state of health. People declaring a bad state of health have incomes by 20% on average lower than people who enjoy good health (assuming that the remaining characteristics of the surveyed person are the same). In case of men, the impact of health state on incomes is slightly greater than in case of women.Wyniki badań potwierdzają istnienie pozytywnej zależności dochodów osób aktywnych zawodowo od stanu zdrowia mierzonego jego samooceną. Osoby deklarujące zły stan zdrowia osiągają dochody przeciętnie o 20% niższe niż osoby, które cieszą się dobrym stanem zdrowia (przy założeniu, że pozostałe charakterystyki badanej osoby są takie same). W przypadku mężczyzn zależność dochodów od stanu zdrowia jest nieznacznie silniejsza niż w przypadku kobiet

KATANA - a charge-sensitive triggering system for the Sπ\piRIT experiment

KATANA - the Krakow Array for Triggering with Amplitude discrimiNAtion - has been built and used as a trigger and veto detector for the S$\pi$RIT TPC at RIKEN. Its construction allows operating in magnetic field and providing fast response for ionizing particles, giving the approximate forward multiplicity and charge information. Depending on this information, trigger and veto signals are generated. The article presents performance of the detector and details of its construction. A simple phenomenological parametrization of the number of emitted scintillation photons in plastic scintillator is proposed. The effect of the light output deterioration in the plastic scintillator due to the in-beam irradiation is discussed.Comment: 14 pages, 11 figure

The translation, validity and reliability of the German version of the Fremantle Back Awareness Questionnaire

Background: The Fremantle Back Awareness Questionnaire (FreBAQ) claims to assess disrupted self-perception of the back. The aim of this study was to develop a German version of the Fre-BAQ (FreBAQ-G) and assess its test-retest reliability, its known-groups validity and its convergent validity with another purported measure of back perception. Methods: The FreBaQ-G was translated following international guidelines for the transcultural adaptation of questionnaires. Thirty-five patients with non-specific CLBP and 48 healthy participants were recruited. Assessor one administered the FreBAQ-G to each patient with CLBP on two separate days to quantify intra-observer reliability. Assessor two administered the FreBaQ-G to each patient on day 1. The scores were compared to those obtained by assessor one on day 1 to assess inter-observer reliability. Known-groups validity was quantified by comparing the FreBAQ-G score between patients and healthy controls. To assess convergent validity, patient\u27s FreBAQ-G scores were correlated to their two-point discrimination (TPD) scores. Results: Intra- and Inter-observer reliability were both moderate with ICC3.1 = 0.88 (95%CI: 0.77 to 0.94) and 0.89 (95%CI: 0.79 to 0.94), respectively. Intra- and inter-observer limits of agreement (LoA) were 6.2 (95%CI: 5.0±8.1) and 6.0 (4.8±7.8), respectively. The adjusted mean difference between patients and controls was 5.4 (95%CI: 3.0 to 7.8, p\u3c0.01). Patient\u27s FreBAQ-G scores were not associated with TPD thresholds (Pearson\u27s r = -0.05, p = 0.79). Conclusions: The FreBAQ-G demonstrated a degree of reliability and known-groups validity. Interpretation of patient level data should be performed with caution because the LoA were substantial. It did not demonstrate convergent validity against TPD. Floor effects of some items of the FreBAQ-G may have influenced the validity and reliability results. The clinimetric properties of the FreBAQ-G require further investigation as a simple measure of disrupted self-perception of the back before firm recommendations on its use can be made