Quantitative Cathodoluminescence Opens New Areas of Investigation in Semiconductor Research and Production

The increasing demand for new opto-electronics devices such as solar cells, laser diodes (LD), and high-brightness light-emitting diodes (HBLED), combined with the economic necessity to achieve lower energy consumption levels and higher device yields, is motivating researchers to develop new materials. The semiconductor industry is actively looking for alternatives to silicon, for example, to address new niche market applications in power devices. Constant efforts employed to reduce production costs are leading manufacturers to grow GaN on silicon substrate, creating new technical challenges, especially regarding the control of defect density on wafer. For all these reasons many studies are being initiated to improve understanding of the fundamental physical properties and behavior of compound semiconductor materials used in quantum wells, quantum dots and nanowire-like structures. Cathodoluminescence (CL) is a spectroscopy method that can generate reliable, quantitative, and stable data for research as well as prepare a basis for quality control during productio

Picosecond Time-Resolved Cathodoluminescence to Probe Exciton Dynamics in α-Plane (Al,Ga)N/GaN Quantum Wells

Extended abstract of a paper presented at Microscopy and Microanalysis 2011 in Nashville, Tennessee, USA, August 7-August 11, 201

Exciton localization mechanisms in wurtzite/zinc-blende GaAs nanowires

We investigate the emission properties of excitons in GaAs nanowires containing quantum disks formed by structural alternation between the zinc-blende and wurtzite phases, by means of temperature-dependent photoluminescence. At 10 K the emission from an ensemble of disks is distributed in a band of full width at half maximum ∼30 meV, whereas the emission linewidth for a single disk is 700 μeV. While the disk ensemble emission exhibits an S-shaped temperature dependence, the emission from single quantum disks follows the temperature dependence of the band gap over the whole temperature range. This indicates that intradisk exciton localization on impurities is negligible and that increasing the temperature induces a transfer of excitons from narrow to thick disks along the length of the wires. Our observations of the emission linewidth for single crystal-phase quantum disks show a scattering rate of excitons with acoustic phonons eight times larger than the values usually reported for (Al,Ga)As/GaAs quantum wells. This large scattering rate demonstrates that the electron effective mass in wurtzite GaAs is much heavier than in zinc-blende GaAs and is evidence of coupling between the Γ7 and Γ8 conduction bands of wurtzite GaAs.We acknowledge financial support from the Poynton Cambridge Australia Scholarship and from the European Union Seventh Framework Program under grant agreement No. 265073. A.F.iM. and E.U. acknowledge funding through the Marie Curie Excellence grant SENFED. S.C.B. thanks S.N.F. for funding through the Marie-Heim Vögtlin scheme

One dimensional exciton luminescence induced by extended defects in nonpolar (Al,Ga)N/GaN quantum wells

In this study, we present the optical properties of nonpolar GaN/(Al,Ga)N single quantum wells (QWs) grown on either a- or m-plane GaN templates for Al contents set below 15%. In order to reduce the density of extended defects, the templates have been processed using the epitaxial lateral overgrowth technique. As expected for polarization-free heterostructures, the larger the QW width for a given Al content, the narrower the QW emission line. In structures with an Al content set to 5 or 10%, we also observe emission from excitons bound to the intersection of I1-type basal plane stacking faults (BSFs) with the QW. Similarly to what is seen in bulk material, the temperature dependence of BSF-bound QW exciton luminescence reveals intra-BSF localization. A qualitative model evidences the large spatial extension of the wavefunction of these BSF-bound QW excitons, making them extremely sensitive to potential fluctuations located in and away from BSF. Finally, polarization-dependent measurements show a strong emission anisotropy for BSF-bound QW excitons, which is related to their one-dimensional character and that confirms that the intersection between a BSF and a GaN/(Al,Ga)N QW can be described as a quantum wire

From the artificial atom to the Kondo-Anderson model: Orientation-dependent magnetophotoluminescence of charged excitons in InAs quantum dots

We present a magnetophotoluminescence study on neutral and charged excitons confined to InAs/GaAs quantum dots. Our investigation relies on a confocal microscope that allows arbitrary tuning of the angle between the applied magnetic field and the sample growth axis. First, from experiments on neutral excitons and trions, we extract the in-plane and on-axis components of the Landé tensor for electrons and holes in the s shell. Then, based on the doubly negatively charged exciton magnetophotoluminescence, we show that the p-electron wave function spreads significantly into the GaAs barriers. We also demonstrate that the p-electron g factor depends on the presence of a hole in the s shell. The magnetic field dependence of triply negatively charged excitons photoluminescence exhibits several anticrossings, as a result of coupling between the quantum dot electronic states and the wetting layer. Finally, we discuss how the system evolves from a Kondo-Anderson exciton description to the artificial atom model when the orientation of the magnetic field goes from Faraday to Voigt geometry.We acknowledge funding from the EPSRC. B.V.H. also thanks the Hitachi Cambridge Laboratory for additional fund- ing. P.C. acknowledges financial support from the European Union Seventh Framework Programme under Grant agreement No. 265073

Absence of quantum-confined Stark effect in GaN quantum disks embedded in (Al,Ga)N nanowires grown by molecular beam epitaxy

Several of the key issues of planar (Al,Ga)N-based deep-ultraviolet light emitting diodes could potentially be overcome by utilizing nanowire heterostructures, exhibiting high structural perfection and improved light extraction. Here, we study the spontaneous emission of GaN/(Al,Ga)N nanowire ensembles grown on Si(111) by plasma-assisted molecular beam epitaxy. The nanowires contain single GaN quantum disks embedded in long (Al,Ga)N nanowire segments essential for efficient light extraction. These quantum disks are found to exhibit intense emission at unexpectedly high energies, namely, significantly above the GaN bandgap, and almost independent of the disk thickness. An in-depth investigation of the actual structure and composition of the nanowires reveals a spontaneously formed Al gradient both along and across the nanowire, resulting in a complex core/shell structure with an Al deficient core and an Al rich shell with continuously varying Al content along the entire length of the (Al,Ga)N segment. This compositional change along the nanowire growth axis induces a polarization doping of the shell that results in a degenerate electron gas in the disk, thus screening the built-in electric fields. The high carrier density not only results in the unexpectedly high transition energies, but also in radiative lifetimes depending only weakly on temperature, leading to a comparatively high internal quantum efficiency of the GaN quantum disks up to room temperature.Comment: This document is the unedited Author's version of a Submitted Work that was subsequently accepted for publication in Nano Letters (2019), copyright (C) American Chemical Society after peer review. To access the final edited and published work see https://doi.org/10.1021/acs.nanolett.9b01521, the supporting information is available (free of charge) under the same lin

Limit design of axisymmetric shells with application to cellular cofferdams

This paper is devoted to the limit design of cellular cofferdams that are regarded as mixed structures where the backfill is modeled as a three-dimensional continuum, while the surrounding sheet pile wall is treated as a cylindrical shell. Dealing with this structure from a static point of view, it turns out that the problem under consideration requires the calculation of the ultimate load value of a circular cylindrical shell subjected to a linearly varying pressure distribution representing the thrust of the backfill material. Extending the results of previous works, a complete solution to this problem is developed for different boundary conditions. The corresponding results are discussed, notably the influence of the shell relative thickness. They are applied to the design of a single cellular cofferdam whose stability under gravity forces is examined, with the strength of the granular backfill material being described by a Mohr-Coulomb criterion