3,640 research outputs found

    Insider research and reflective practice: getting published: extending an experiment in critical friendship

    Get PDF
    Purpose: This aim of this working paper is to connect a community of scholarly practitioners who are passionate about insider researcher and who are willing to support each other in doing, writing and publishing this form of research. Approach: The paper is grounded in a conceptualization of knowledge creation as socially interactive, contingent and multi-faceted acknowledging that researchers and practitioners ‘frame’ research questions and findings in the light of their previous experience and tacit knowledge Research and practice implications: To develop a plan for action to include: seeking sources of funding, collaborative publication and dissemination in order to release the potential of insider research and in doing contribute to a CHRD agenda. Originality/value: In presenting this paper we extend the potential of a ‘critical friend’ approach in order to connect and support insider researchers who wish to explore and progress the potential contribution of ‘actionable’ knowledge in both practice and scholarly domains

    Compressibility of titanosilicate melts

    Get PDF
    The effect of composition on the relaxed adiabatic bulk modulus (K0) of a range of alkali- and alkaline earth-titanosilicate [X 2 n/n+ TiSiO5 (X=Li, Na, K, Rb, Cs, Ca, Sr, Ba)] melts has been investigated. The relaxed bulk moduli of these melts have been measured using ultrasonic interferometric methods at frequencies of 3, 5 and 7 MHz in the temperature range of 950 to 1600°C (0.02 Pa s < s < 5 Pa s). The bulk moduli of these melts decrease with increasing cation size from Li to Cs and Ca to Ba, and with increasing temperature. The bulk moduli of the Li-, Na-, Ca- and Ba-bearing metasilicate melts decrease with the addition of both TiO2 and SiO2 whereas those of the K-, Rb- and Cs-bearing melts increase. Linear fits to the bulk modulus versus volume fraction of TiO2 do not converge to a common compressibility of the TiO2 component, indicating that the structural role of TiO2 in these melts is dependent on the identity of the cation. This proposition is supported by a number of other property data for these and related melt compositions including heat capacity and density, as well as structural inferences from X-ray absorption spectroscopy (XANES). The compositional dependence of the compressibility of the TiO2 component in these melts explains the difficulty incurred in previous attempts to incorporate TiO2 in calculation schemes for melt compressibility. The empirical relationship KV-4/3 for isostructural materials has been used to evaluate the compressibility-related structural changes occurring in these melts. The alkali metasilicate and disilicate melts are isostructural, independent of the cation. The addition of Ti to the metasilicate composition (i.e. X2TiSiO5), however, results in a series of melts which are not isostructural. The alkaline-earth metasilicate and disilicate compositions are not isostructural, but the addition of Ti to the metasilicate compositions (i.e. XTiSiO5) would appear, on the basis of modulus-volume systematics, to result in the melts becoming isostructural with respect to compressibility

    Exploring differential item functioning in the SF-36 by demographic, clinical, psychological and social factors in an osteoarthritis population

    Get PDF
    The SF-36 is a very commonly used generic measure of health outcome in osteoarthritis (OA). An important, but frequently overlooked, aspect of validating health outcome measures is to establish if items work in the same way across subgroup of a population. That is, if respondents have the same 'true' level of outcome, does the item give the same score in different subgroups or is it biased towards one subgroup or another. Differential item functioning (DIF) can identify items that may be biased for one group or another and has been applied to measuring patient reported outcomes. Items may show DIF for different conditions and between cultures, however the SF-36 has not been specifically examined in an osteoarthritis population nor in a UK population. Hence, the aim of the study was to apply the DIF method to the SF-36 for a UK OA population. The sample comprised a community sample of 763 people with OA who participated in the Somerset and Avon Survey of Health. The SF-36 was explored for DIF with respect to demographic, social, clinical and psychological factors. Well developed ordinal regression models were used to identify DIF items. Results: DIF items were found by age (6 items), employment status (6 items), social class (2 items), mood (2 items), hip v knee (2 items), social deprivation (1 item) and body mass index (1 item). Although the impact of the DIF items rarely had a significant effect on the conclusions of group comparisons, in most cases there was a significant change in effect size. Overall, the SF-36 performed well with only a small number of DIF items identified, a reassuring finding in view of the frequent use of the SF-36 in OA. Nevertheless, where DIF items were identified it would be advisable to analyse data taking account of DIF items, especially when age effects are the focus of interest

    Evaluating the effects of bilingual traffic signs on driver performance and safety

    Get PDF
    Variable Message Signs (VMS) can provide immediate and relevant information to road users and bilingual VMS can provide great flexibility in countries where a significant proportion of the population speak an alternative language to the majority. The study reported here evaluates the effect of various bilingual VMS configurations on driver behaviour and safety. The aim of the study was to determine whether or not the visual distraction associated with bilingual VMS signs of different configurations (length, complexity) impacted on driving performance. A driving simulator was used to allow full control over the scenarios, road environment and sign configuration and both longitudinal and lateral driver performance was assessed. Drivers were able to read one and two-line monolingual signs and two-line bilingual signs without disruption to their driving behaviour. However, drivers significantly reduced their speed in order to read four-line monolingual and four-line bilingual signs, accompanied by an increase in headway to the vehicle in front. This implies that drivers are possibly reading the irrelevant text on the bilingual sign and various methods for reducing this effect are discussed

    Phase-slip induced dissipation in an atomic Bose-Hubbard system

    Full text link
    Phase slips play a primary role in dissipation across a wide spectrum of bosonic systems, from determining the critical velocity of superfluid helium to generating resistance in thin superconducting wires. This subject has also inspired much technological interest, largely motivated by applications involving nanoscale superconducting circuit elements, e.g., standards based on quantum phase-slip junctions. While phase slips caused by thermal fluctuations at high temperatures are well understood, controversy remains over the role of phase slips in small-scale superconductors. In solids, problems such as uncontrolled noise sources and disorder complicate the study and application of phase slips. Here we show that phase slips can lead to dissipation for a clean and well-characterized Bose-Hubbard (BH) system by experimentally studying transport using ultra-cold atoms trapped in an optical lattice. In contrast to previous work, we explore a low velocity regime described by the 3D BH model which is not affected by instabilities, and we measure the effect of temperature on the dissipation strength. We show that the damping rate of atomic motion-the analogue of electrical resistance in a solid-in the confining parabolic potential fits well to a model that includes finite damping at zero temperature. The low-temperature behaviour is consistent with the theory of quantum tunnelling of phase slips, while at higher temperatures a cross-over consistent with the transition to thermal activation of phase slips is evident. Motion-induced features reminiscent of vortices and vortex rings associated with phase slips are also observed in time-of-flight imaging.Comment: published in Nature 453, 76 (2008

    Powerlaw optical conductivity with a constant phase angle in high Tc superconductors

    Get PDF
    In certain materials with strong electron correlations a quantum phase transition (QPT) at zero temperature can occur, in the proximity of which a quantum critical state of matter has been anticipated. This possibility has recently attracted much attention because the response of such a state of matter is expected to follow universal patterns defined by the quantum mechanical nature of the fluctuations. Forementioned universality manifests itself through power-law behaviours of the response functions. Candidates are found both in heavy fermion systems and in the cuprate high Tc superconductors. Although there are indications for quantum criticality in the cuprate superconductors, the reality and the physical nature of such a QPT are still under debate. Here we identify a universal behaviour of the phase angle of the frequency dependent conductivity that is characteristic of the quantum critical region. We demonstrate that the experimentally measured phase angle agrees precisely with the exponent of the optical conductivity. This points towards a QPT in the cuprates close to optimal doping, although of an unconventional kind.Comment: pdf format, 9 pages, 4 color figures include

    Emplacement of inflated Pāhoehoe flows in the Naude’s Nek Pass, Lesotho remnant, Karoo continental flood basalt province: use of flow-lobe tumuli in understanding flood basalt emplacement

    Get PDF
    Physical volcanological features are presented for a 710-m-thick section, of the Naude’s Nek Pass, within the lower part of the Lesotho remnant of the Karoo Large Igneous Province. The section consists of inflated pāhoehoe lava with thin, impersistent sedimentary interbeds towards the base. There are seven discreet packages of compound and hummocky pāhoehoe lobes containing flow-lobe tumuli, making up approximately 50% of the section. Approximately 45% of the sequence consists of 14 sheet lobes, between 10 and 52-m-thick. The majority of the sheet lobes are in two packages indicating prolonged periods of lava supply capable of producing thick sheet lobes. The other sheet lobes are as individual lobes or pairs, within compound flows, suggesting brief increases in lava supply rate. We suggest, contrary to current belief, that there is no evidence that compound flows are proximal to source and sheet lobes (simple flows) are distal to source and we propose that the presence of flow-lobe tumuli in compound flows could be an indicator that a flow is distal to source. We use detailed, previously published, studies of the Thakurvadi Formation (Deccan Traps) as an example. We show that the length of a lobe and therefore the sections that are ‘medial or distal to source’ are specific to each individual lobe and are dependent on the lava supply of each eruptive event, and as such flow lobe tumuli can be used as an indicator of relative distance from source

    Prescribing practices of primary-care veterinary practitioners in dogs diagnosed with bacterial pyoderma

    Get PDF
    Concern has been raised regarding the potential contributions of veterinary antimicrobial use to increasing levels of resistance in bacteria critically important to human health. Canine pyoderma is a frequent, often recurrent diagnosis in pet dogs, usually attributable to secondary bacterial infection of the skin. Lesions can range in severity based on the location, total area and depth of tissue affected and antimicrobial therapy is recommended for resolution. This study aimed to describe patient signalment, disease characteristics and treatment prescribed in a large number of UK, primary-care canine pyoderma cases and to estimate pyoderma prevalence in the UK vet-visiting canine population

    Winter wheat roots grow twice as deep as spring wheat roots, is this important for N uptake and N leaching losses?

    Get PDF
    Cropping systems comprising winter catch crops followed by spring wheat could reduce N leaching risks compared to traditional winter wheat systems in humid climates. We studied the soil mineral N (Ninorg) and root growth of winter- and spring wheat to 2.5 m depth during three years. Root depth of winter wheat (2.2 m) was twice that of spring wheat, and this was related to much lower amounts of Ninorg in the 1 to 2.5 m layer after winter wheat (81 kg Ninorg ha-1 less). When growing winter catch crops before spring wheat, N content in the 1 to 2.5 m layer after spring wheat was not different from that after winter wheat. The results suggest that by virtue of its deep rooting, winter wheat may not lead to high levels of leaching as it is often assumed in humid climates. Deep soil and root measurements (below 1 m) in this experiment were essential to answer the questions we posed
    corecore