On the elasto-viscoplastic behavior of the Ti5553 alloy

The elastoviscoplastic behavior of the Ti5553 alloy is characterized and compared to the classical Ti–6Al–4V alloy. The true stress–strain curves are determined based on tensile tests performed under different strain rates at room temperature and at 1501C, from which the elastic constants and the parameters of a Norton–Hoff viscoplastic model are identified. The strength of the Ti5553 alloy is 20–40% higher than the strength of the Ti–6Al–4V alloy. The Ti5553 alloy constitutes thus a promising candidate for advanced structural applications. In view of modeling structural applications of forming operations, the elastic and plastic initial anisotropy of the two alloys is investigated by combining compression on cylinders with elliptical sections, uniaxial tensile tests in different material directions, plane strain and shear tests. The initial anisotropy of the different alloys is very weak which justifies the modeling of the mechanical behavior with an isotropic yield surface. The identified elastoviscoplastic model is validated by comparing experimental results with FE predictions both on cylindrical notched specimens subjected to tensile tests and onflat specimens subjected to plane strain conditions

Kinetics of early and late molecular recurrences after first-line imatinib cessation in chronic myeloid leukemia: updated results from the STIM2 trial

Discontinuation of tyrosine kinase inhibitors in chronic phase chronic myeloid leukemia is feasible in clinical practice based on recently published international recommendations. Nevertheless, factors predictive of molecular recurrence have not been fully elucidated and long-term follow-up of patients enrolled in clinical studies are required in order to update knowledge on discontinuation attempts particularly in terms of the safety and durability of treatment-free remission (TFR). In the current study, we updated results from the STIM2 study in the light of the consensual criterion of molecular recurrence reported in different international recommendations. Among the 199 patients included in the perprotocol study, 108 patients lost a major molecular response. With a median follow-up of 40.8 months (5.5-111 months), the probability of treatment-free remission was 43.4% [36.3-50.4] at 5 years, 40.9% [32.8-47.3] at 7 years and 34.5% [25.6- 43.3] at 9 years. Molecular recurrence occurred between 0 to 6 months, 6 to 24 months and after 24 months in 75 patients (69%), 15 patients (14%) and 18 patients (17%), respectively. Notably, the kinetics of molecular recurrence differed significantly between these three subgroups with a median time from loss of MR4 (BCR::ABL1 IS≤0.01%) to loss of major molecular response of 1, 7 and 22 months, respectively. Predictive factors of molecular recurrence differed according to the time of occurrence of the molecular recurrence. Durations of imatinib treatment and deep molecular response as well as BCR::ABL1/ABL1 levels at cessation of tyrosine kinase inhibitor treatment, as quantified by reverse transcriptase droplet digital polymerase chain reaction, are involved in molecular recurrence occurring up to 24 months but not beyond. (ClinicalTrial. gov Identifier NCT#0134373)

Altimetry for the future: Building on 25 years of progress

In 2018 we celebrated 25 years of development of radar altimetry, and the progress achieved by this methodology in the fields of global and coastal oceanography, hydrology, geodesy and cryospheric sciences. Many symbolic major events have celebrated these developments, e.g., in Venice, Italy, the 15th (2006) and 20th (2012) years of progress and more recently, in 2018, in Ponta Delgada, Portugal, 25 Years of Progress in Radar Altimetry. On this latter occasion it was decided to collect contributions of scientists, engineers and managers involved in the worldwide altimetry community to depict the state of altimetry and propose recommendations for the altimetry of the future. This paper summarizes contributions and recommendations that were collected and provides guidance for future mission design, research activities, and sustainable operational radar altimetry data exploitation. Recommendations provided are fundamental for optimizing further scientific and operational advances of oceanographic observations by altimetry, including requirements for spatial and temporal resolution of altimetric measurements, their accuracy and continuity. There are also new challenges and new openings mentioned in the paper that are particularly crucial for observations at higher latitudes, for coastal oceanography, for cryospheric studies and for hydrology. The paper starts with a general introduction followed by a section on Earth System Science including Ocean Dynamics, Sea Level, the Coastal Ocean, Hydrology, the Cryosphere and Polar Oceans and the ‘‘Green” Ocean, extending the frontier from biogeochemistry to marine ecology. Applications are described in a subsequent section, which covers Operational Oceanography, Weather, Hurricane Wave and Wind Forecasting, Climate projection. Instruments’ development and satellite missions’ evolutions are described in a fourth section. A fifth section covers the key observations that altimeters provide and their potential complements, from other Earth observation measurements to in situ data. Section 6 identifies the data and methods and provides some accuracy and resolution requirements for the wet tropospheric correction, the orbit and other geodetic requirements, the Mean Sea Surface, Geoid and Mean Dynamic Topography, Calibration and Validation, data accuracy, data access and handling (including the DUACS system). Section 7 brings a transversal view on scales, integration, artificial intelligence, and capacity building (education and training). Section 8 reviews the programmatic issues followed by a conclusion

Real-world study of the efficacy and safety of belantamab mafodotin (GSK2857916) in relapsed or refractory multiple myeloma based on data from the nominative ATU in France: the IFM 2020-04 study

Belantamab mafodotin (BM) is an anti-BCMA antibody-drug conjugate (GSK2857916) that represents an alternative option in multiple myeloma. We sought to assess the efficacy and safety of BM in a real-world setting in patients who benefited from an early access program. We conducted an observational, retrospective, multicenter study. Eligibility criteria were treatment of relapsed or refractory multiple myeloma (RRMM) in monotherapy in adult patients who have received at least three lines of therapy previously, including at least one immunomodulatory agent (IMiD), a proteasome inhibitor (PI) and an anti-CD38 monoclonal antibody, and whose disease progressed during the last treatment period. The primary endpoint of the study is to assess the overall survival (OS). Between November 2019 and December 2020, 106 patients were treated with BM; 97 were eligible for the efficacy evaluation and 104 for safety. The median age was 66 (range, 37–82) years. High-risk cytogenetics were identified in 40.9% of patients. Fifty-five (56.7%) patients were triple-class refractory and 11 (11.3%) were penta-class refractory. The median number of prior lines of treatment was five (range, 3–12). The median number of BM cycles administered was three (range, 1–22). The overall response rate at best response was 38.1% (37/97). The median OS was 9.3 months (95% confidence interval [CI]: 5.9-15.3), and median progression-free survival was 3.5 months (95% CI: 1.9-4.7). The median duration of response was 9 months (range, 4.65-10.4). Treatment was delayed for 55 (52.9%) patients including 36.5% for treatment-related toxicity. Ophthalmic adverse events, mainly grade ≤2, were the most common toxicity (48%). The occurrence of keratopathy was 37.5%. Overall, our data are concordant with the results from DREAMM-2 in terms of efficacy and safety on a non-biased population

Mechanical property optimization via microstructural control of new metastable beta titanium alloys

beta-titanium alloys are increasingly used thanks to their high mechanical properties resulting from a clever choice of processing parameters. The effects of heat-treatment conditions on the microstructure of two recent beta-metastable titanium alloys are investigated in this study, along with the resulting mechanical properties

Characterisation of the phase transformations in a metastable beta titanium alloy

beta titanium alloys are more and more best choice materials for automotive and aerospace applications due to their high performance to density ratio. Among these alloys, the TIMETAL Ti-LCB is already used in the automotive industry since it presents excellent mechanical properties and a lower cost compared to other Ti alloys. The present study deals with the characterisation of the nucleation and growth of the alpha phase during several thermomechanical processes since the distribution and size of the alpha grains strongly influence the mechanical properties of the resulting microstructures. Several heat treatments were conducted after annealing. The resulting microstructures were characterised by SEM, TEM, XRD or EBSD. It is observed that the morphology and the volume fraction of the alpha phase is strongly dependent on the holding temperature, on the heating or cooling rate and on the beta grain size.Anglai