EQUITABLE CROPSHARE ARRANGEMENTS FOR INTENSIVE DRYLAND CROPPING SYSTEMS

As producers move toward intensive dryland cropping systems, the potential for inequities in cropshare lease arrangements exists. A whole farm budget was developed to evaluate returns for landowner and tenant from different cropshare lease arrangements. Results suggest that cropshare lease adjustments are necessary as cropping systems become more intensive.Crop Production/Industries,

Facing the challenge: the impact of recession and unemployment on men’s health in Ireland.

The economic recession with its accompanying rise in unemployment rates is linked to extremely adverse effects for men’s mental health. This research report Facing the Challenge – The Impact of the Recession and Unemployment on Men’s Health in Ireland identifies a strong expectation of increased mental health problems for men given the very strong correlation between unemployment and male mental ill health. The report is the result of a research and consultation process carried out, in Northern Ireland and the Republic of Ireland, by Nexus Research Co-operative on behalf of IPH. 93% of frontline organisations, North and South, in contact with unemployed men linked health challenges to unemployment and recession and all organisations surveyed noted adverse health challenges for men they work with. In addition to health challenges being higher for unemployed men, they were also very high for men who saw themselves as being threatened with unemployment. The organisations surveyed and the men who were interviewed identified the challenges to health as: • High levels of stress or anxiety • Dependency on or over-use of alcohol/other drugs • Deterioration in physical health • Development of conflict in family or close personal relationships • Isolation (including sharing or communicating problems) • A reluctance to approach services or seek hel

Fv antibodies to aflatoxin B1 derived from a pre-immunized antibody phage display library system

The production and characterization of recombinant antibodies to aflatoxin B[SUB1] (AFB[SUB1]), a potent mycotoxin and carcinogen is described. The antibody fragments produced were then applied for use in a surface plasmon resonance-based biosensor (BIAcore), which measures biomolecular interactions in 'real-time'. Single chain Fv (scFv) antibodies were generated to aflatoxin B1 from an established phage display system, which incorporated a range of different plasmids for efficient scFv expression. The scFv's were used in the development of a competitive ELISA, and also for the development of surface plasmon resonance (SPR)-based inhibition immunoassays. They were found to be suitable for the detection of AFB[SUB1], in this format, with the assays being sensitive and reproducible

Colonisation resistance in the sand fly gut:Leishmania protects Lutzomyia longipalpis from bacterial infection

BACKGROUND: Phlebotomine sand flies transmit the haemoflagellate Leishmania, the causative agent of human leishmaniasis. The Leishmania promastigotes are confined to the gut lumen and are exposed to the gut microbiota within female sand flies. Here we study the colonisation resistance of yeast and bacteria in preventing the establishment of a Leishmania population in sand flies and the ability of Leishmania to provide colonisation resistance towards the insect bacterial pathogen Serratia marcescens that is also pathogenic towards Leishmania. METHODS: We isolated microorganisms from wild-caught and laboratory-reared female Lutzomyia longipalpis, identified as Pseudozyma sp. Asaia sp. and Ochrobactrum intermedium. We fed the females with a sugar meal containing the microorganisms and then subsequently fed them with a bloodmeal containing Leishmania mexicana and recorded the development of the Leishmania population. Further experiments examined the effect of first colonising the sand fly gut with L. mexicana followed by feeding with, Serratia marcescens, an insect bacterial pathogen. The mortality of the flies due to S. marcescens was recorded in the presence and absence of Leishmania. RESULTS: There was a reduction in the number of flies harbouring a Leishmania population that had been pre-fed with Pseudozyma sp. and Asaia sp. or O. intermedium. Experiments in which L. mexicana colonised the sand fly gut prior to being fed an insect bacterial pathogen, Serratia marcescens, showed that the survival of flies with a Leishmania infection was significantly higher compared to flies without Leishmania infection. CONCLUSIONS: The yeast and bacterial colonisation experiments show that the presence of sand fly gut microorganisms reduce the potential for Leishmania to establish within the sand fly vector. Sand flies infected with Leishmania were able to survive an attack by the bacterial pathogen that would have killed the insect and we concluded that Leishmania may benefit its insect host whilst increasing the potential to establish itself in the sand fly vector. We suggest that the increased ability of the sand fly to withstand a bacterial entomopathogen, due to the presence of the Leishmania, may provide an evolutionary pressure for the maintenance of the Leishmania-vector association

Breakdown of the semiclassical approximation during the early stages of preheating

The validity of the semiclassical approximation is investigated during the preheating phase in models of chaotic inflation using a modification of a criterion previously proposed for semiclassical gravity. If the modified criterion is violated then fluctuations of the two-point function for the quantum elds are large and the semiclassical approximation is not valid. Evidence is provided that the semiclassical approximation breaks down during the early stages of preheating, well before either scattering effects or backreaction effects are important

T-cell recognition is shaped by epitope sequence conservation in the host proteome and microbiome

Several mechanisms exist to avoid or suppress inflammatory T-cell immune responses that could prove harmful to the host due to targeting self-antigens or commensal microbes. We hypothesized that these mechanisms could become evident when comparing the immunogenicity of a peptide from a pathogen or allergen with the conservation of its sequence in the human proteome or the healthy human microbiome. Indeed, performing such comparisons on large sets of validated T-cell epitopes, we found that epitopes that are similar with self-antigens above a certain threshold showed lower immunogenicity, presumably as a result of negative selection of T cells capable of recognizing such peptides. Moreover, we also found a reduced level of immune recognition for epitopes conserved in the commensal microbiome, presumably as a result of peripheral tolerance. These findings indicate that the existence (and potentially the polarization) of T-cell responses to a given epitope is influenced and to some extent predictable based on its similarity to self-antigens and commensal antigens.Fil: Bresciani, Anne Gøther. Technical University of Denmark; Dinamarca. La Jolla Institute for Allergy and Immunology; Estados UnidosFil: Paul, Sinu. La Jolla Institute for Allergy and Immunology; Estados UnidosFil: Schommer, Nina. La Jolla Institute for Allergy and Immunology; Estados UnidosFil: Dillon, Myles B.. La Jolla Institute for Allergy and Immunology; Estados UnidosFil: Bancroft, Tara. La Jolla Institute for Allergy and Immunology; Estados UnidosFil: Greenbaum, Jason. La Jolla Institute for Allergy and Immunology; Estados UnidosFil: Sette, Alessandro. La Jolla Institute for Allergy and Immunology; Estados UnidosFil: Nielsen, Morten. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Instituto de Investigaciones Biotecnológicas. Instituto de Investigaciones Biotecnológicas ; Argentina. Technical University of Denmark; DinamarcaFil: Peters, Bjoern. La Jolla Institute for Allergy and Immunology; Estados Unido

Applications for Gradient Metal Alloys Fabricated Using Additive Manufacturing

Recently, additive manufacturing (AM) techniques have been developed that may shift the paradigm of traditional metal production by allowing complex net-shaped hardware to be built up layer-by-layer, rather than being machined from a billet. The AM process is ubiquitous with polymers due to their low melting temperatures, fast curing, and controllable viscosity, and 3D printers are widely available as commercial or consumer products. 3D printing with metals is inherently more complicated than with polymers due to their higher melting temperatures and reactivity with air, particularly when heated or molten. The process generally requires a high-power laser or other focused heat source, like an electron beam, for precise melting and deposition. Several promising metal AM techniques have been developed, including laser deposition (also called laser engineered net shaping or LENS and laser deposition technology (LDT)), direct metal laser sintering (DMLS), and electron beam free-form (EBF). These machines typically use powders or wire feedstock that are melted and deposited using a laser or electron beam. Complex net-shape parts have been widely demonstrated using these (and other) AM techniques and the process appears to be a promising alternative to machining in some cases. Rather than simply competing with traditional machining for cost and time savings, the true advantage of AM involves the fabrication of hardware that cannot be produced using other techniques. This could include parts with "blind" features (like foams or trusses), parts that are difficult to machine conventionally, or parts made from materials that do not exist in bulk forms. In this work, the inventors identify that several AM techniques can be used to develop metal parts that change composition from one location in the part to another, allowing for complete control over the mechanical or physical properties. This changes the paradigm for conventional metal fabrication, which relies on an assortment of "post-processing" methods to locally alter properties (such as coating, heat treating, work hardening, shot peening, etching, anodizing, among others). Building the final part in an additive process allows for the development of an entirely new class of metals, so-called "functionally graded metals" or "gradient alloys." By carefully blending feedstock materials with different properties in an AM process, hardware can be developed with properties that cannot be obtained using other techniques but with the added benefit of the net-shaped fabrication that AM allows