An investigation of the performance of a new Mechanical thrombectomy device using Bond Graph modelling: application to the extraction of blood clots in the middle cerebral artery

A number of thrombectomy devices using a variety of methods have now been developed to facilitate clot removal. We present research involving one such experimental device recently developed in the UK, called a ‘GP’ Thrombus Aspiration Device (GPTAD). This device has the potential to bring about the extraction of a thrombus. Although the device is at a relatively early stage of development, the results look encouraging. In this work, we present an analysis and modeling of the GPTAD by means of the bond graph technique; it seems to be a highly effective method of simulating the device under a variety of conditions. Such modeling is useful in optimizing the GPTAD and predicting the result of clot extraction. The aim of this simulation model is to obtain the minimum pressure necessary to extract the clot and to verify that both the pressure and the time required to complete the clot extraction are realistic for use in clinical situations, and are consistent with any experimentally obtained data. We therefore consider aspects of rheology and mechanics in our modeling

Microbial ligand costimulation drives neutrophilic steroid-refractory asthma

Funding: The authors thank the Wellcome Trust (102705) and the Universities of Aberdeen and Cape Town for funding. This research was also supported, in part, by National Institutes of Health GM53522 and GM083016 to DLW. KF and BNL are funded by the Fonds Wetenschappelijk Onderzoek, BNL is the recipient of an European Research Commission consolidator grant and participates in the European Union FP7 programs EUBIOPRED and MedALL. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.Peer reviewedPublisher PD

How do MNC R&D laboratory roles affect employee international assignments?

Research and development (R&D) employees are important human resources for multinational corporations (MNCs) as they are the driving force behind the advancement of innovative ideas and products. International assignments of these employees can be a unique way to upgrade their expertise; allowing them to effectively recombine their unique human resources to progress existing knowledge and advance new ones. This study aims to investigate the effect of the roles of R&D laboratories in which these employees work on the international assignments they undertake. We categorise R&D laboratory roles into those of the support laboratory, the locally integrated laboratory and the internationally interdependent laboratory. Based on the theory of resource recombinations, we hypothesise that R&D employees in support laboratories are not likely to assume international assignments, whereas those in locally integrated and internationally interdependent laboratories are likely to assume international assignments. The empirical evidence, which draws from research conducted on 559 professionals in 66 MNC subsidiaries based in Greece, provides support to our hypotheses. The resource recombinations theory that extends the resource based view can effectively illuminate the international assignment field. Also, research may provide more emphasis on the close work context of R&D scientists rather than analyse their demographic characteristics, the latter being the focus of scholarly practice hitherto

Study of Bc+B_c^+ decays to the K+K−π+K^+K^-\pi^+ final state and evidence for the decay Bc+→χc0π+B_c^+\to\chi_{c0}\pi^+

A study of $B_c^+\to K^+K^-\pi^+$ decays is performed for the first time using data corresponding to an integrated luminosity of 3.0 $\mathrm{fb}^{-1}$ collected by the LHCb experiment in $pp$ collisions at centre-of-mass energies of $7$ and $8$ TeV. Evidence for the decay $B_c^+\to\chi_{c0}(\to K^+K^-)\pi^+$ is reported with a significance of 4.0 standard deviations, resulting in the measurement of $\frac{\sigma(B_c^+)}{\sigma(B^+)}\times\mathcal{B}(B_c^+\to\chi_{c0}\pi^+)$ to be $(9.8^{+3.4}_{-3.0}(\mathrm{stat})\pm 0.8(\mathrm{syst}))\times 10^{-6}$. Here $\mathcal{B}$ denotes a branching fraction while $\sigma(B_c^+)$ and $\sigma(B^+)$ are the production cross-sections for $B_c^+$ and $B^+$ mesons. An indication of $\bar b c$ weak annihilation is found for the region $m(K^-\pi^+)<1.834\mathrm{\,Ge\kern -0.1em V\!/}c^2$, with a significance of 2.4 standard deviations.Comment: All figures and tables, along with any supplementary material and additional information, are available at https://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-PAPER-2016-022.html, link to supplemental material inserted in the reference

Non-lethal control of the cariogenic potential of an agent-based model for dental plaque

Dental caries or tooth decay is a prevalent global disease whose causative agent is the oral biofilm known as plaque. According to the ecological plaque hypothesis, this biofilm becomes pathogenic when external challenges drive it towards a state with a high proportion of acid-producing bacteria. Determining which factors control biofilm composition is therefore desirable when developing novel clinical treatments to combat caries, but is also challenging due to the system complexity and the existence of multiple bacterial species performing similar functions. Here we employ agent-based mathematical modelling to simulate a biofilm consisting of two competing, distinct types of bacterial populations, each parameterised by their nutrient uptake and aciduricity, periodically subjected to an acid challenge resulting from the metabolism of dietary carbohydrates. It was found that one population was progressively eliminated from the system to give either a benign or a pathogenic biofilm, with a tipping point between these two fates depending on a multiplicity of factors relating to microbial physiology and biofilm geometry. Parameter sensitivity was quantified by individually varying the model parameters against putative experimental measures, suggesting non-lethal interventions that can favourably modulate biofilm composition. We discuss how the same parameter sensitivity data can be used to guide the design of validation experiments, and argue for the benefits of in silico modelling in providing an additional predictive capability upstream from in vitro experiments

Search for direct pair production of the top squark in all-hadronic final states in proton-proton collisions at s√=8 TeV with the ATLAS detector

The results of a search for direct pair production of the scalar partner to the top quark using an integrated luminosity of 20.1fb−1 of proton–proton collision data at √s = 8 TeV recorded with the ATLAS detector at the LHC are reported. The top squark is assumed to decay via t˜→tχ˜01 or t˜→ bχ˜±1 →bW(∗)χ˜01 , where χ˜01 (χ˜±1 ) denotes the lightest neutralino (chargino) in supersymmetric models. The search targets a fully-hadronic final state in events with four or more jets and large missing transverse momentum. No significant excess over the Standard Model background prediction is observed, and exclusion limits are reported in terms of the top squark and neutralino masses and as a function of the branching fraction of t˜ → tχ˜01 . For a branching fraction of 100%, top squark masses in the range 270–645 GeV are excluded for χ˜01 masses below 30 GeV. For a branching fraction of 50% to either t˜ → tχ˜01 or t˜ → bχ˜±1 , and assuming the χ˜±1 mass to be twice the χ˜01 mass, top squark masses in the range 250–550 GeV are excluded for χ˜01 masses below 60 GeV

Observation of associated near-side and away-side long-range correlations in √sNN=5.02 TeV proton-lead collisions with the ATLAS detector

Two-particle correlations in relative azimuthal angle (Δϕ) and pseudorapidity (Δη) are measured in √sNN=5.02  TeV p+Pb collisions using the ATLAS detector at the LHC. The measurements are performed using approximately 1  μb-1 of data as a function of transverse momentum (pT) and the transverse energy (ΣETPb) summed over 3.1<η<4.9 in the direction of the Pb beam. The correlation function, constructed from charged particles, exhibits a long-range (2<|Δη|<5) “near-side” (Δϕ∼0) correlation that grows rapidly with increasing ΣETPb. A long-range “away-side” (Δϕ∼π) correlation, obtained by subtracting the expected contributions from recoiling dijets and other sources estimated using events with small ΣETPb, is found to match the near-side correlation in magnitude, shape (in Δη and Δϕ) and ΣETPb dependence. The resultant Δϕ correlation is approximately symmetric about π/2, and is consistent with a dominant cos⁡2Δϕ modulation for all ΣETPb ranges and particle pT

Deformation-related volcanism in the Pacific Ocean linked to the Hawaiian-Emperor bend

Ocean islands, seamounts and volcanic ridges are thought to form above mantle plumes. Yet, this mechanism cannot explain many volcanic features on the Pacific Ocean floor and some might instead be caused by cracks in the oceanic crust linked to the reorganization of plate motions. A distinctive bend in the Hawaiian–Emperor volcanic chain has been linked to changes in the direction of motion of the Pacific Plate, movement of the Hawaiian plume, or a combination of both. However, these links are uncertain because there is no independent record that precisely dates tectonic events that affected the Pacific Plate. Here we analyse the geochemical characteristics of lava samples collected from the Musicians Ridges, lines of volcanic seamounts formed close to the Hawaiian–Emperor bend. We find that the geochemical signature of these lavas is unlike typical ocean island basalts and instead resembles mid-ocean ridge basalts. We infer that the seamounts are unrelated to mantle plume activity and instead formed in an extensional setting, due to deformation of the Pacific Plate. 40Ar/39Ar dating reveals that the Musicians Ridges formed during two time windows that bracket the time of formation of the Hawaiian–Emperor bend, 53–52 and 48–47 million years ago. We conclude that the Hawaiian–Emperor bend was formed by plate–mantle reorganization, potentially triggered by a series of subduction events at the Pacific Plate margins

Do early-life exposures explain why more advantaged children get eczema? Findings from the UK Millennium Cohort Study

Background: Atopic dermatitis (eczema) in childhood is socially patterned, with higher incidence in more advantaged populations. However, it is unclear what factors explain the social differences. Objectives: To identify early‐life risk factors for eczema, and to explore how early‐life risk factors explain any differences in eczema. Methods: We estimated odds ratios (ORs) for ever having had eczema by age 5 years in 14 499 children from the U.K. Millennium Cohort Study (MCS), with a focus on maternal, antenatal and early‐life risk factors and socioeconomic circumstances (SECs). Risk factors were explored to assess whether they attenuated associations between SECs and eczema. Results Overall 35·1% of children had ever had eczema by age 5 years. Children of mothers with degree‐level qualifications vs. no educational qualifications were more likely to have eczema (OR 1·52, 95% confidence interval 1·31–1·76), and there was a gradient across the socioeconomic spectrum. Maternal atopy, breastfeeding (1–6 weeks and ≥ 6 months), introduction of solids under 4 months or cow's milk under 9 months, antibiotic exposure in the first year of life and grime exposure were associated with an increased odds of having eczema. Female sex, Pakistani and Bangladeshi ethnicity, smoking during pregnancy, exposure to environmental tobacco smoke and having more siblings were associated with reduced odds for eczema. Controlling for maternal, antenatal and early‐life characteristics (particularly maternal smoking during pregnancy, breastfeeding and number of siblings) reduced the OR for eczema to 1·26 (95% confidence interval 1·03–1·50) in the group with the highest educational qualifications compared with the least. Conclusions: In a representative U.K. child cohort, eczema was more common in more advantaged children. This was explained partially by early‐life factors including not smoking during pregnancy, breastfeeding and having fewer siblings

Food effects on statolith composition of the common cuttlefish (Sepia officinalis)

The concentration of trace elements within cephalopod statoliths can provide a record of the environmental characteristics at the time of calcification. To reconstruct accurately the environmental characteristics at the time of calcification, it is important to understand the influence of as many factors as possible. To test the hypothesis that the elemental composition of cuttlefish statoliths could be influenced by diet, juvenile Sepia officinalis were fed either shrimp Crangon sp. or fish Clupea harengus under equal temperature and salinity regimes in laboratory experiments. Element concentrations in different regions of the statoliths (core–lateral dome–rostrum) were determined using laser ablation inductively coupled plasma mass spectrometry (LA- ICPMS). The ratios of Sr/Ca, Ba/Ca, Mn/Ca and Y/Ca in the statolith’s lateral dome of shrimp-fed cuttlefish were significantly higher than in the statolith’s lateral dome of fish-fed cuttlefish. Moreover, significant differences between statolith regions were found for all analysed elements. The fact that diet adds a considerable variation especially to Sr/Ca and Ba/Ca must be taken into account in future micro-chemical statolith studies targeting cephalopod’s life history