Ecological imaginaries : organising sustainability

University of Technology, Sydney. Faculty of Business.This thesis investigates organisational enactment of sustainability. The problematic addressed is that despite strong evidence supporting human induced global ecological damage, organisational practices remain unchanged and continue to degrade ecological systems. The question addressed is what factors contribute to the inertia that inhibits change for ecological sustainability in organisations? The question is addressed from the perspectives of individuals who are stakeholders in organisations. The modern concept of sustainability arose during the 1970s and selected aspects of sustainability discourses, for example the concept of the triple bottom line (TBL), have since been integrated into the organising narratives of organisation and society. Despite such success, indicators such as human induced climate change, biodiversity loss and growing inequalities between rich and poor, suggest that mainstream institutions have not taken up change for sustainability. The proposition of this thesis is that alteration to our social imaginary (ies) is a necessary precursor to enactment of sustainability. The thesis presents findings from three case studies: Landcare, Corcon and Carepoint. These organisations were selected because they represented different sectors and each had initiated a formal sustainability change project: Corcon is an engineering organisation, Carepoint a community services not-for-profit organisation and Landcare an agricultural organisation. Landcare highlights the dialogue that nature has with individuals and organisations and how recognising this dialogue can lead to ecological solutions for sustainability. The Corcon case contributes the importance of boundaries defining inclusion and exclusion as moral constraints and enablers to developing sustainability solutions and the Carepoint case demonstrates that the multiplicity of competing sustainability discourses are understood by individuals who then make decisions based on the context of the dominant imaginary within which they are situated. These findings from the research highlight barriers concerned with meaning construction that view nature as an excluded other. I argue that the adoption of ecological sustainability by organisations and society needs new narratives to facilitate the emergence of meanings of ecological sustainability conducive to the inclusion of nature. The synthesis of these findings presents two possibilities for stimulating the creation of meaning construction that would facilitate an inclusive approach to nature. The first possibility is the Australian Aboriginal concept of Country, which offers a new source of logics upon which the development of a new socio-political sustainability imaginary may draw. The second possibility argues for the need to create a new social imaginary to support ecological sustainability. A contribution of this thesis is to provide the alternative frame of metabolic organisation to extant models of weak and strong sustainability to stimulate the creation of new ecological imaginaries. Metabolic organisation is defined as a systemic framework comprising three interdependent concepts: metabolism, values and enmeshment, and brings together three distinct strands of theory: social and biological metabolism, value theory and ecological theories

Organising for Ecological Repair: Reconstructing Land Management Practice

© 2015, © 2015 SAGE Publications. In this article, we explore organising narratives that underpin the generation of effective ecological solutions. We examine the processes of meaning construction in relation to the development of sustainable land management practices in the Landcare organisation in Australia. Meaning construction is situated in a variety of contexts that are themselves strongly influenced by a meta-narrative, which Taylor has labelled the “modern social imaginary”: A shared system of meanings that captures the imaginations of individuals and shapes their social groupings and society. The shift in meaning construction is reflected in the emergence of a narrative of “ecological repair” that involved a process of learning and knowledge development we have labelled protracted sense-making. Our research findings have led us to conclude that the development of successful ecological solutions require an active rewriting of the social imaginary

Development and Validation of NDE Standards for NASAs Advanced Composites Project

The adoption of composite materials in aircraft manufacturing for use in structural applications continues to increase but is still relatively new to the industry. Composite components have large development and certification costs in comparison to metallic structures. Traditional methods of nondestructive evaluation (NDE) used for isotropic materials such as metals may not be adequate for composite applications and therefore is a contributing factor to the cost and complexity of developing new structural composites. Additionally, the defects of interest in composite materials are significantly different from metals. Thus, good quality composite reference standards are essential to obtaining reliable and quantifiable NDE results. Ideally, reference standards contain flaws or damage whose NDE indications most closely represent those created by actual flaws/damage. They should also be easy to duplicate and inexpensive to manufacture. NASAs Advanced Composites Project, working with industry partners, developed a set of composite standards that contain a range of validated defects representing those typically found in aerospace composite materials. This paper will provide an overview of the standards fabricated, the manufacturing plans used to fabricate them, the types of defects included, and validation testing that has performed. Also discussed is an inter-laboratory round-robin test that is being performed on these standards. The paper will describe a guidance document being compiled to outline relevant inspection procedures for challenging and critical defects unique to composites where conventional techniques may not be appropriate

Deuteron -- α\alpha interaction by inversion of RGM S-matrix: determination of spin-orbit potential for spin-1 projectile

The iterative-perturbative (IP) procedure for S-matrix to potential inversion is applied to spin-one projectiles for the restricted case of vector spin-orbit interaction only. In order to evaluate this extension of IP inversion we have inverted the multi-channel RGM $S_{lj}$ of Kanada et al for deuterons scattering from $^4$He with deuteron distortion and then compared the central components with those derived from RGM with spin set to zero. Attention is given to the question of how well the resulting potentials are established. Reliable spin-1 inversion is demonstrated. Results relating to inversion, to deuteron-nucleus interactions and to RGM are presented and suggest the range of nuclear interaction information which the procedure makes possible. Unusual non-locality and parity dependence effects are found; these are of possible relevance to generic properties of nuclear potentials.Comment: 15 pages LaTeX plus 6 postscript figure

Landcare and the livelihood of knowledge

This paper explores how communities generate effective ecological solutions using both implicit narrative construction and explicit processes of knowledge creation and knowledge application. We argue that the act of developing a narrative frames our understanding of the environment and governs our relationship with our environment. We identify micro-narratives extracted from the interviews with members of Australian Landcare organizations and link these micro-narratives to knowledge creation and dissemination processes. We conclude that social change toward sustainability comes about through the rewriting of the environmental story within which we situate ourselves

Wire Crimp Termination Verification Using Ultrasonic Inspection

The development of a new ultrasonic measurement technique to quantitatively assess wire crimp terminations is discussed. The amplitude change of a compressional ultrasonic wave propagating through the junction of a crimp termination and wire is shown to correlate with the results of a destructive pull test, which is a standard for assessing crimp wire junction quality. Various crimp junction pathologies such as undercrimping, missing wire strands, incomplete wire insertion, partial insulation removal, and incorrect wire gauge are ultrasonically tested, and their results are correlated with pull tests. Results show that the nondestructive ultrasonic measurement technique consistently (as evidenced with destructive testing) predicts good crimps when ultrasonic transmission is above a certain threshold amplitude level. A physics-based model, solved by finite element analysis, describes the compressional ultrasonic wave propagation through the junction during the crimping process. This model is in agreement within 6% of the ultrasonic measurements. A prototype instrument for applying this technique while wire crimps are installed is also presented. The instrument is based on a two-jaw type crimp tool suitable for butt-splice type connections. Finally, an approach for application to multipin indenter type crimps will be discussed

Development of a Practical Broadband Active Vibration Control System

The goal of this work is to develop robust, lightweight, and low-power control units that can be used to suppress structural vibration in flexible aerospace structures. In particular, this paper focuses on active damping, which is implemented using compact decentralized control units distributed over the structure. Each control unit consists of a diamond-shaped piezoelectric patch actuator, three miniature accelerometers, and analog electronics. The responses from the accelerometers are added together and then integrated to give a signal proportional to velocity. The signal is then inverted, amplified, and applied to the actuator, which generates a control force that is out of phase with the measured velocity. This paper describes the development of the control system, including a detailed description of the control and power electronics. The paper also presents experimental results acquired on a Plexiglas window blank. Five identical control units installed around the perimeter of the window achieved 10 dB peak reductions and a 2.4 dB integrated reduction of the spatially averaged velocity of the window between 500 and 3000 Hz

Ultrasonic Inspection to Quantify Failure Pathologies of Crimped Electrical Connections

Previous work has shown that ultrasonic inspection provides a means of assessing electrical crimp quality that ensures the electrical and mechanical integrity of an initial crimp before the installation process is completed. The amplitude change of a compressional ultrasonic wave propagating at right angles to the wire axis and through the junction of a crimp termination was shown to correlate with the results of destructive pull tests, which is a standard for assessing crimp wire junction quality. Of additional concern are crimps made at high speed assembly lines for wiring harnesses, which are used for critical applications, such as in aircraft. During high-speed assembly it is possible that many faulty crimps go undetected until long after assembly, and fail in service. The position and speed of the crimping jaw become factors as the high-speed crimp is formed. The work presented in this paper is designed to cover the more difficult and more subtle area of high-speed crimps by taking into account the rate change of the measurements. Building on the previous work, we present an analysis methodology, based on transmitted ultrasonic energy and timing of the first received pulse that is shown to correlate to the gauge of the crimp/ferrule combination and the position of the crimping jaw. Results demonstrating the detectability of a number of the crimp failure pathologies, such as missing strands, partially inserted wires and incomplete crimp compression, are presented. The ability of this technique to estimate crimp height, a mechanical measure of crimp quality, is discussed