574 research outputs found

    Experimental Evidence of a Haldane Gap in an S = 2 Quasi-linear Chain Antiferromagnet

    Full text link
    The magnetic susceptibility of the S=2S = 2 quasi-linear chain Heisenberg antiferromagnet (2,22'-bipyridine)trichloromanganese(III), MnCl_{3}(bipy), has been measured from 1.8 to 300 K with the magnetic field, H, parallel and perpendicular to the chains. The analyzed data yield g2g\approx 2 and J35J\approx 35 K. The magnetization, M, has been studied at 30 mK and 1.4 K in H up to 16 T. No evidence of long-range order is observed. Depending on crystal orientation, M0M\approx 0 at 30 mK until a critical field is achieved (Hc=1.2±0.2TH_{c\|} = 1.2\pm 0.2 T and $H_{c\bot} = 1.8\pm 0.2 T), where M increases continuously as H is increased. These results are interpreted as evidence of a Haldane gap.Comment: 11 pages, 4 figure

    The First Metal Complexes of 4,6-diamino-1-hydro-5-hydroxy-pyrimidine-2-thione: Preparation, Physical and Spectroscopic Studies, and Preliminary Antimicrobial Properties

    Get PDF
    The new complexes [M2O5L2(H2O)2] · H2O (M = Mo, 1; M = W, 2), [RuL2(H2O)2] · H2O (3), [ML3] · xH2O (M = Rh, x = 2, 4; M = Ir, x = 1, 5), [RhL2(PPh3)2](ClO4) · 2H2O (6), [PdL2] · 2H2O (7), [PdL(phen)]Cl · H2O (8), [Re OL2(PPh3)]Cl (9) and [UO2L2] (10) are reported, where LH is 4,6-diamino-1-hydro-5-hydroxy-pyrimidine-2-thione. The complexes were characterized by elemental analyses, physical techniques (molar conductivity, room-temperature magnetic susceptibility), and spectroscopic (IR, Raman, UV/VIS/ligand field, NMR, mass) methods. The ligand L− is in its thione form and behaves as a bidentate chelate with the deprotonated (hydroxyl) oxygen and the nitrogen of one amino group as donor atoms. Oxobridged dinuclear (1, 2) and various mononuclear (3–10) structures are assigned for the complexes in the solid state. The metal ion coordination geometries are octahedral (1–6, 9, 10) or square planar (7, 8). The free ligand LH and complexes 1, 4, 7, and 8 were assayed in vitro for antimicrobial activity against two bacterial and two fungal cultures

    Mononuclear and Dinuclear Manganese(II) Complexes from the Use of Methyl(2-pyridyl)ketone Oxime

    Get PDF
    The reactions of methyl(2-pyridyl)ketone oxime, (py)C(Me)NOH, with manganese(II) sulfate monohydrate have been investigated. The reaction between equimolar quantities of MnSO4 · H2O and (py)C(Me)NOH in H2O lead to the dinuclear complex [Mn2(SO4)2{(py)C(Me)NOH}4] · (py)C(Me)NOH, 1 · (py)C(Me)NOH, while employment of NaOMe as base affords the compound [Mn(HCO2)2{(py)C(Me)NOH}2] (2). The structures of both compounds have been determined by single crystal X-ray diffraction. In both complexes, the organic ligand chelates through its nitrogen atoms. The IR data are discussed in terms of the nature of bonding and the structures of the two complexes

    A Mononuclear and a Mixed-Valence Chain Polymer Arising from Copper(II) Halide Chemistry and the Use of 2,2′-Pyridil

    Get PDF
    Reactions of 2,2′-pyridil (pyCOCOpy) with CuCl2 · 2H2O and CuBr2 in EtOH yielded the mononuclear complex [Cu(pyCOOEt)2Cl2] · H2O (1) and the one-dimensional, mixed-valence complex [Cu2ICuII(pyCOOEt)2Br4]n (2), respectively. Both complexes crystallize in the triclinic space group P 1¯. The lattice constants are a = 8.382(2), b = 9.778(2), c = 7.814(2), α = 101.17(1), β = 114.55(1), γ = 94.14(1)° for 1 and a = 8.738(1), b = 9.375(2), c = 7.966(1), α = 79.09(1), β = 64.25(1), γ = 81.78(1)° for 2. 2,2′-pyridil undergoes a metal-assisted alcoholysis and oxidation leading to decomposition and yielding the ethyl picolinate (pyCOOEt) ligand. The autoredox process associated with the reduction of copper(II) to copper(I) in the case of complex 2 is discussed in terms of the increased redox activity of the copper(II) bromide system relative to the copper(II) chloride system

    Coordination Clusters of 3d-Metals That Behave as Single-Molecule Magnets (SMMs): Synthetic Routes and Strategies

    Get PDF
    The area of 3d-metal coordination clusters that behave as Single-Molecule Magnets (SMMs) is now quite mature within the interdisciplinary field of Molecular Magnetism. This area has created a renaissance in Inorganic Chemistry. From the synthetic Inorganic Chemistry viewpoint, the early years of “try and see” exercises (1993–2000) have been followed by the development of strategies and strict approaches. Our review will first summarize the early synthetic efforts and routes for the preparation of polynuclear 3d-metal SMMs, and it will be then concentrated on the description of the existing strategies. The former involve the combination of appropriate 3d-metal-containing starting materials (simple salts with inorganic anions, metal cardoxylates, and pre-formed carboxylate clusters, metal phosphonates) and one or two primary organic ligands; the importance of the end-on azido group as a ferromagnetic coupler in 3d-metal SMM chemistry will be discussed. The utility of comproportionation reactions and the reductive aggregation route for the construction of manganese SMMs will also be described. Most of the existing strategies for the synthesis of SMMs concern manganese. These involve substitution of carboxylate ligands in pre-formed SMMs by other carboxylate or non-carboxylate groups, reduction procedures for the {Mn8IIIMn4IV} SMMs, spin “tweaking,” “switching on” SMM properties upon conversion of low-spin clusters into high-spin ones, ground-state spin switching and enhancing SMM properties via targeted structural distortions, the use of radical bridging ligands and supramolecular approaches. A very useful strategy is also the “switching on” of SMM behavior through replacement of bridging hydroxide groups by end-on azido or isocyanato ligands in clusters. Selected examples will be mentioned and critically discussed. Particular emphasis will be given on the criteria for the choice of ligands

    Synthesis, X-Ray Structure, and Characterization of Catena-bis(benzoate)bis{N,N-bis(2-hydroxyethyl)glycinate}cadmium(II)

    Get PDF
    The reaction of N, N-bis(2-hydroxyethyl)glycine (bicine; bicH3) with Cd(O2CPh)2 · 2H2O in MeOH yielded the polymeric compound [Cd2(O2CPh)2(bicH2)2]n(1). The complex crystallizes in the tetragonal space group P41212. The lattice constants are a = b = 12.737(5) and c = 18.288(7) Å. The compound contains chains of repeating {Cd2(O2CPh)2(bicH2)2} units. One CdII atom is coordinated by two carboxylate oxygen, four hydroxyl oxygen, and two nitrogen atoms from two symmetry-related 2.21111 (Harris notation) bicH2− ligands. The other CdII atom is coordinated by six carboxylate oxygen atoms, four from two bicH2− ligands and two from the monodentate benzoate groups. Each bicinate(-1) ligand chelates the 8-coordinate, square antiprismatic CdII atom through one carboxylate oxygen, the nitrogen, and both hydroxyl oxygen atoms and bridges the second, six-coordinate trigonal prismatic CdII center through its carboxylate oxygen atoms. Compound 1 is the first structurally characterized cadmium(II) complex containing any anionic form of bicine as ligand. IR data of 1 are discussed in terms of the coordination modes of the ligands and the known structure

    In Search for Titanocene Complexes with Improved Cytotoxic Activity: Synthesis, X-Ray Structure, and Spectroscopic Study of Bis(η5-cyclopentadienyl)difluorotitanium(IV)

    Get PDF
    The 1 : 2 reaction of [Ti(η5-C5H5)2Cl2] and AgF in CHCl3/H2O yielded the fluoro analog [Ti(η5-C5H5)2F2] (1) in almost quantitative yield (C5H5 is the cyclopentadienyl group). The coordination about the TiIV atom formed by two fluoro ligands and the centroids of the cyclopentadienyl rings is distorted tetrahedral. The compound crystallizes in the orthorhombic space group C2cm. The lattice constants are a = 5.9055(4), b = 10.3021(5), c = 14.2619(9) Å, and α = β = γ = 90°. The complex has been characterized by elemental analyses and spectroscopic (IR, 1H NMR) data. A structural comparison of the four members of the [Ti(η5-C5H5)2X2] family of complexes (X = F, Cl, Br, I) is attempted

    Dinuclear, tetranuclear and polymeric complexes in copper(II) perchlorate/pyridine-2,6-diamidoxime chemistry: synthetic, structural and magnetic studies

    Get PDF
    The initial use of pyridine-2,6-diamidoxime (pdamoH2) in metal cluster and polymer chemistry is described. Depending on the reaction conditions employed, the Cu(ClO4)2·6H2O/pdamoH2 system has provided access to the dinuclear compound [Cu2(pdamoH)2(ClO4)2(MeOH)2] (1), the chain-like polymer [Cu2(pdamoH)2]n(ClO4)2n (2) and to the tetranuclear cluster [Cu4(pdamo)2(pdamoH)2](ClO4)2 (3). Single-crystal, X-ray crystallography reveals different coordination modes for the pdamoH- ligand in each compound, providing the first evidence for the flexibility and versatility of the anionic forms of pdamoH2. Variable-temperature magnetic susceptibility studies indicate very strong antiferromagnetic coupling in the three complexes, attributable to the double oximato bridges which link the CuII spin carriers

    Use of the 2-Pyridinealdoxime/N,N′-Donor Ligand Combination in Cobalt(III) Chemistry: Synthesis and Characterization of Two Cationic Mononuclear Cobalt(III) Complexes

    Get PDF
    The use of 2-pyridinealdoxime (paoH)/N,N′-donor ligand (L-L) “blend” in cobalt chemistry has afforded two cationic mononuclear cobalt(III) complexes of the general type [Co(pao)2(L-L)]+, where L-L = 1,10-phenanthroline (phen) and 2,2′-bipyridine (bpy). The CoCl2/paoH/L-L (1 : 2 : 1) reaction system in MeOH gives complexes [CoIII(pao)2(phen)]Cl·2H2O (1·2H2O) and [CoIII(pao)2(bpy)]Cl·1.5MeOH (2·1.5MeOH). The structures of the complexes were determined by single-crystal X-ray crystallography. The CoIII ions are six-coordinate, surrounded by three bidentate chelating ligands, that is, two pao− and one phen or bpy. The deprotonated oxygen atom of the pao− ligand remains uncoordinated and participates in hydrogen bonding with the solvate molecules. IR data of the complexes are discussed in terms of the nature of bonding and the known structures
    corecore