Reverse shoulder prosthesis in patients with rheumatoid arthritis: a systematic review

PURPOSE: To obtain detailed information on the outcomes of patients with rheumatoid arthritis (RA) undergoing reverse shoulder arthroplasty (RSA) METHODS: A literature search was conducted for studies reporting on the use of RSA in RA patients from 1990 to 2014. The inclusion criteria were a report of sufficient information on pre-operative status and surgical outcome allowing evaluation of the therapeutic potential of RSA in RA. The literature search resulted in 586 hits, but only five studies that met the inclusion criteria were assessed. RESULTS: There were 100 shoulders that had been operated on, of which 87 were followed for a mean of 55.4 months, the longest follow-up being 11.9 years Most patients had glenohumeral erosive lesions of Larsen Grade III or IV. The Delta III prosthesis was implanted in most cases and in three studies bone graft was used for severe glenoid lesions. The main outcome measures employed were the Constant score (Cs) and ASES questionnaire. The mean increase in Cs and ASES score after surgery was 42.4 and 54 points, respectively. The mean post-operative forward elevation was 120.6°, the average increment being 51° and the mean increase of abduction was 58.5°. The mean prevalence of scapular notching was 35.4 %. The rate of adverse events was 31 %, but the vast majority were of minor severity. Eight prostheses underwent revision, due to infection in four. CONCLUSIONS: RSA implanted in RA patients would appear to give similar results to those obtained in massive cuff tears with or without arthropathy

Kinematic analysis of reaching movements of the upper limb after total or reverse shoulder arthroplasty

Studies have analyzed three-dimensional complex motion of the shoulder in healthy subjects or patients undergoing total shoulder arthroplasty (TSA) or reverse shoulder arthroplasty (RSA). No study to date has assessed the reaching movements in patients with TSA or RSA. Twelve patients with TSA (Group A) and 12 with RSA (Group B) underwent kinematic analysis of reaching movements directed at four targets. The results were compared to those of 12 healthy subjects (Group C). The assessed parameters were hand-to-target distance, target-approaching velocity, humeral-elevation angular velocity, normalized jerk (indicating motion fluidity), elbow extension and humeral elevation angles. Mean Constant score increased by 38 points in Group A and 47 in Group B after surgery. In three of the tasks, there were no significant differences between healthy subjects and patients in the study groups. Mean target-approaching velocity and humeral-elevation angular velocity were significantly greater in the control group than in study groups and, overall, greater in Group A than Group B. Movement fluidity was significantly greater in the controls, with patients in Group B showing greater fluidity than those in Group A. Reaching movements in the study groups were comparable, in three of the tasks, to those in the control group. However, the latter performed significantly better with regard to target-approaching velocity, humeral-elevation angular velocity and movement fluidity, which are the most representative characteristics of reaching motion. These differences, that may be related to deterioration of shoulder proprioception after prosthetic implant, might possibly be decreased with appropriate rehabilitation

Lumbar interspinous process fixation and fusion with stand-alone interlaminar lumbar instrumented fusion implant in patients with degenerative spondylolisthesis undergoing decompression for spinal stenosis

Abstract STUDY DESIGN: Prospective cohort study. PURPOSE: To assess the ability of a stand-alone lumbar interspinous implant (interspinous/interlaminar lumbar instrumented fusion, ILIF) associated with bone grafting to promote posterior spine fusion in degenerative spondylolisthesis (DS) with vertebral instability. OVERVIEW OF LITERATURE: A few studies, using bilateral laminotomy (BL) or bilateral decompression by unilateral laminotomy (BDUL), found satisfactory results in stenotic patients with decompression alone, but others reported increased olisthesis, or subsequent need for fusion in DS with or without dynamic instability. METHODS: Twenty-five patients with Grade I DS, leg pain and chronic low back pain underwent BL or BDUL and ILIF implant. Olisthesis was 13% to 21%. Follow-up evaluations were performed at 4 to 12 months up to 25 to 44 months (mean, 34.4). Outcome measures were numerical rating scale (NRS) for back and leg pain, Oswestry disability index (ODI) and short-form 36 health survey (SF-36) of body pain and function. RESULTS: Fusion occurred in 21 patients (84%). None had increased olisthesis or instability postoperatively. Four types of fusion were identified. In Type I, the posterior part of the spinous processes were fused. In Type II, fusion extended to the base of the processes. In Type III, bone was present also around the polyetheretherketone plate of ILIF. In Type IV, even the facet joints were fused. The mean NRS score for back and leg pain decreased by 64% and 80%, respectively. The mean ODI score was decreased by 52%. SF-36 bodily pain and physical function mean scores increased by 53% and 58%, respectively. Computed tomography revealed failed fusion in four patients, all of whom still had vertebral instability postoperatively. CONCLUSIONS: Stand-alone ILIF with interspinous bone grafting promotes vertebral fusion in most patients with lumbar stenosis and unstable Grade I DS undergoing BL or BDUL

Subacromial space in adult patients with thoracic hyperkyphosis and in healthy volunteers.

The assumption that subacromial space decreases in patients with thoracic hyperkyphosis arises from sporadic and personal observations. The purpose of this study was to compare width of subacromial space calculated on radiographs and CT scans of a high number of patients with thoracic hyperkyphosis that registered on exams of healthy volunteers. We measured the subacromial space, using Petersson's method, on radiographs of 47 patients with idiopathic or acquired thoracic hyperkyphosis and of 175 healthy shoulder volunteers. Both groups were further distinguished considering gender and age. Females with hyperkyphosis were also divided in two subgroups: those with a kyphotic curve of less (24 patients) or more (19 patients) than 50 degrees , respectively. Subacromial space of all patients and of 21 volunteers was also evaluated using CT. Acromio-humeral space was less wide in patients with hyperkyphosis with respect to coeval volunteers of the same gender; in females and in subjects older than 60. Subacromial width of females with hyperkyphosis whose curve was more than 50 degrees was significantly narrower (p<0.05) than that measured on radiograms or CT scans of females with a less severe spinal deformity. Decrease of subacromial space may be attributed to less posterior tilting of the scapula and to dyskinesis of the scapular movement. Scapular malposition causes an anomalous orientation of the acromion that may contribute to subacromial impingement. Patients with thoracic hyperkyphosis greater than 50 degrees had a subacromial space narrower than that measured in patients with a less severe kyphosis. This suggests that subacromial width is directly related to severity of thoracic kyphosis. Because hyperkyphosis of patients with osteoporotic vertebral fractures may worsen over the time, subacromial decompression could give only temporary shoulder pain relief

BONE REGROWTH AFTER SURGICAL DECOMPRESSION FOR LUMBAR SPINAL STENOSIS

Abstract: We reviewed 40 patients treated surgically for lumbar stenosis at an average time of 8.6 years after operation. In 32, total laminectomy had been performed and in eight bilateral laminotomy, both at one or more levels. Of the 16 patients with degenerative spondylolisthesis, ten had had a concomitant spinal fusion. Patients were assigned to one of four groups according to the amount of bone regrowth: group 0 had no regrowth and groups I, II, and III, had mild, moderate or marked regrowth, respectively. Only 12% of the patients showed no bone regrowth; 48% were assigned to group I, 28% to group II and 12% to group III. Imaging studies showed varying degrees of recurrent stenosis in patients with moderate or marked bone regrowth. All patients with degenerative spondylolisthesis showed bone regrowth, which was more severe in those who had not had a fusion. The clinical results were satisfactory in most of the patients with mild or no bone regrowth and significantly less good in those with moderate or marked regrowth. In the group with degenerative spondylolisthesis, the proportion of satisfactory results was significantly higher in patients who had had spinal fusion. The long-term results of surgery for lumbar stenosis depend both upon the amount of bone regrowth and the degree of postoperative vertebral stability

Does the Shape of the L5 Vertebral Body Depend on the Height of CT Slices in the Pedicle?

The shape of the L5 vertebral body was analyzed using a computerized tomography (CT) scan. OBJECTIVE: The aim of this study is to determine if the vertebral L5 body shape varies depending on the height of the CT slices through the L5 pedicle. SUMMARY OF BACKGROUND DATA: The morphometry of L5 has been studied to help the introduction of pedicular screws. The shape of the vertebral body has been seldom looked into, and the findings obtained show a triangular shape and hemispherical shape, supposedly owing to interpersonal variability. The hemisphere shape enables pedicular screws to be introduced nonconvergently, whereas the triangular shape enables pedicular screws to be introduced at a convergent angle but posing the risk of cortical perforation unless these guidelines are followed. METHODS: Abdominal CT multicut with 64 crowns was performed in 101 consecutive patients with diverse indications. Width of CT slices was with a 1-mm reconstruction increase. We selected one axial slice that passed through the upper part of the pedicle and another one that passed through the lower part of the pedicle and compared next parameters in both cuts: pedicular cortical width, pedicular endostal width, pedicular angle, vertebral body length, vertebral body width, vertebral perimeter angles, and visual appearance of vertebral body shape. RESULTS: We found statistical differences between all values except the anterior vertebral perimeter angle on comparing values of upper part with values of lower part and visual vertebral body shape was different in 93% of vertebrae. In the upper part the vertebral body is hemispherical whereas in the lower part it is triangular. CONCLUSION: In most cases, the vertebral body shape is hemispherical in the upper part of the pedicle and triangular in the lower part of the pedicle. It means that in the lower part pedicular screws must be introduced at a more convergent angle than in the upper part if we do not want to break any cortical of the vertebral body

LUMBAR SPINAL STENOSIS AND DIABETES. OUTCOMES OF SURGICAL DECOMPRESSION

Abstract: We reviewed 25 diabetic (mean age 68 years) and 25 non-diabetic patients (mean age 71 years) who had undergone decompression for lumbar spinal stenosis at a mean of 3.4 years after operation to determine whether diabetes affected the outcome of surgery. The preoperative symptoms were similar in the two groups except that an abrupt onset of symptoms, the presence of night pain and the absence of any posture-related pain relief were recorded only by diabetic patients. Nerve-conduction velocity was slowed in 80% of the diabetic and in 25% of the nondiabetic patients. Peripheral vascular deficiency was diagnosed in 20% of patients with diabetes and in 4% of non-diabetics. The outcome of surgery was similarly successful in the two groups. Mistaken preoperative diagnosis was the cause of failure in three diabetic patients, two with diabetic neuropathy and one with diabetic angiopathy

Environment and harvest time affects the combustion qualities of Miscanthus genotypes

Miscanthus spp. are high-yielding perennial C4 grasses, native to Asia, that are being investigated in Europe as potential biofuels. Production of economically viable solid biofuel must combine high biomass yields with good combustion qualities. Good biomass combustion quality depends on minimizing moisture, ash, K, chloride, N, and S. To this end, field trials at five sites in Europe from Sweden to Portugal were planted with 15 different genotypes including M. x giganteus, M. sacchariflorus, M. sinensis, and newly bred M. sinensis hybrids. Yield and combustion quality at an autumn and a late winter/ early spring harvest were determined in the third year after planting when the stands had reached maturity. As expected, delaying the harvest by three to four months improved the combustion quality of all genotypes by reducing ash (from 40 to 25 g kg-1 dry matter), K (from 9 to 4 g kg-1 dry matter), chloride (from 4 to 1 g kg-1 dry matter), N (from 5 to 4 g kg-1 dry matter), and moisture (from 564 to 291 g kg-1 fresh matter). However, the delayed harvest also decreased mean biomass yields from 17 to 14 t ha-1. There is a strong interaction among yield, quality, and site growing conditions. Results show that in northern regions of Europe, M. sinensis hybrids can be recommended for high yields (yielding up to 25 t ha-1), but M. sinensis (nonhybrid) genotypes have higher combustion qualities. In mid- and south Europe, M. giganteus (yielding up to 38 t ha-1) or specific high-yielding M. sinensis hybrids (yielding up to 41 t ha-1) are more suitable for biofuel production