Hydrogen Dissociation and Diffusion on Ni and Ti -doped Mg(0001) Surfaces

It is well known, both theoretically and experimentally, that alloying MgH$_2$ with transition elements can significantly improve the thermodynamic and kinetic properties for H$_2$ desorption, as well as the H$_2$ intake by Mg bulk. Here we present a density functional theory investigation of hydrogen dissociation and surface diffusion over Ni-doped surface, and compare the findings to previously investigated Ti-doped Mg(0001) and pure Mg(0001) surfaces. Our results show that the energy barrier for hydrogen dissociation on the pure Mg(0001) surface is high, while it is small/null when Ni/Ti are added to the surface as dopants. We find that the binding energy of the two H atoms near the dissociation site is high on Ti, effectively impeding diffusion away from the Ti site. By contrast, we find that on Ni the energy barrier for diffusion is much reduced. Therefore, although both Ti and Ni promote H$_2$ dissociation, only Ni appears to be a good catalyst for Mg hydrogenation, allowing diffusion away from the catalytic sites. Experimental results corroborate these theoretical findings, i.e. faster hydrogenation of the Ni doped Mg sample as opposed to the reference Mg or Ti doped Mg.Comment: 17 pages, 15 figures, to appear in Journal of Chemical Physic

Structure of nanoparticles embedded in micellar polycrystals

We investigate by scattering techniques the structure of water-based soft composite materials comprising a crystal made of Pluronic block-copolymer micelles arranged in a face-centered cubic lattice and a small amount (at most 2% by volume) of silica nanoparticles, of size comparable to that of the micelles. The copolymer is thermosensitive: it is hydrophilic and fully dissolved in water at low temperature (T ~ 0{\deg}C), and self-assembles into micelles at room temperature, where the block-copolymer is amphiphilic. We use contrast matching small-angle neuron scattering experiments to probe independently the structure of the nanoparticles and that of the polymer. We find that the nanoparticles do not perturb the crystalline order. In addition, a structure peak is measured for the silica nanoparticles dispersed in the polycrystalline samples. This implies that the samples are spatially heterogeneous and comprise, without macroscopic phase separation, silica-poor and silica-rich regions. We show that the nanoparticle concentration in the silica-rich regions is about tenfold the average concentration. These regions are grain boundaries between crystallites, where nanoparticles concentrate, as shown by static light scattering and by light microscopy imaging of the samples. We show that the temperature rate at which the sample is prepared strongly influence the segregation of the nanoparticles in the grain-boundaries.Comment: accepted for publication in Langmui

Testing general relativity using golden black-hole binaries

The coalescences of stellar-mass black-hole binaries through their inspiral, merger, and ringdown are among the most promising sources for ground-based gravitational-wave (GW) detectors. If a GW signal is observed with sufficient signal-to-noise ratio, the masses and spins of the black holes can be estimated from just the inspiral part of the signal. Using these estimates of the initial parameters of the binary, the mass and spin of the final black hole can be uniquely predicted making use of general-relativistic numerical simulations. In addition, the mass and spin of the final black hole can be independently estimated from the merger--ringdown part of the signal. If the binary black hole dynamics is correctly described by general relativity (GR), these independent estimates have to be consistent with each other. We present a Bayesian implementation of such a test of general relativity, which allows us to combine the constraints from multiple observations. Using kludge modified GR waveforms, we demonstrate that this test can detect sufficiently large deviations from GR, and outline the expected constraints from upcoming GW observations using the second-generation of ground-based GW detectors.Comment: 5 pages, 2 fig

Simultaneous XMM-Newton and ESO VLT observations of SN 1995N: probing the wind/ejecta interaction

We present the results of the first {\it XMM-Newton} observation of the interacting type IIn supernova 1995N, performed in July 2003. We find that the 0.2--10.0 keV unabsorbed flux dropped at a value of $\simeq 1.8 \times 10^{-13}$ erg cm$^{-2}$ s$^{-1}$, almost one order of magnitude lower than that of a previous {\it ASCA} observation of January 1998. From all the available X-ray measurements, an interesting scenario emerges where the X-ray light emission may be produced by a two-phase (clumpy/smooth) circumstellar medium. The X-ray spectral analysis shows statistically significant evidence for the presence of two distinct components, that can be modeled with emission from optically thin, thermal plasmas at different temperatures. The exponent of the ejecta density distribution inferred from these temperatures is $n\simeq 6.4$. From the fluxes of the two spectral components we derive an estimate of the mass loss rate of the supernova progenitor, ${\dot M} \sim 2 \times 10^{-4} M_\odot {\rm yr}^{-1}$, at the upper end of the interval exhibited by red super-giants. Coordinated optical and infrared observations allow us to reconstruct the simultaneous infrared to X-ray flux distribution of SN 1995N. We find that, at $\sim$ 9 years after explosion, the direct X-ray thermal emission due to the wind/ejecta interaction is $\sim 5$ times larger than the total reprocessed IR/optical flux.Comment: 11 pages, 7 figures, MNRAS, in pres

Relationship between perceived exertion and mean power frequency of the EMG signal from the upper trapezius muscle during isometric shoulder elevation

The aim of the study was to investigate the relationship between a fatigue-induced increase of perceived exertion in the neck with a decrease of mean power frequency (MPF) in the surface electromyography (sEMG) signal during repeated shoulder elevation endurance tasks. About Thirty-two healthy women (age range 20-62) performed two maximum 6-min shoulder elevation endurance tasks at 30% of their maximal voluntary contraction (MVC) level, separated by a rest of 6min. During these exercises, perceived exertion was estimated using the Borg scale (range 0-10), whereas the MPF of the sEMG signal from the upper trapezius was simultaneously detected. Linear regression analysis was applied over time for each trial and subject for both MPF and Borg scale rating values. The MPF was normalized by the intercept of the linear regression analysis. The resulting slopes of normalized mean power frequency (nMPF) and Borg scale rating were correlated with each other by linear regression for both trials. In order to investigate the individual behavior of fatigue effects between trials, Δ trial 2-trial 1 slopes of nMPF and Borg scale ratings were calculated for each subject. These slopes of nMPF and Borg scale ratings were correlated with each other as well by linear regression. The increase of Borg scale ratings, as well as the decrease of nMPF, were significantly higher in trial 2 than trial 1 (P<0.01). The results show a linear correlation between slopes of nMPF and Borg scale ratings for both trials 1 and 2 (r=0.76, P<0.01). Trial-to-trial slopes (Δ trial 2-trial 1) of nMPF and Borg scale rating, were also significantly correlated (r=0.68, P<0.05). Thus, the individually sensed increase of perceived exertion in the neck during trial 2 was accompanied by a simultaneously higher detected decrease of nMPF. These findings indicate a close relationship between subjective perception of exertion in the neck and objectively assessed muscle fatigue of the upper trapeziu

Triple Michelson Interferometer for a Third-Generation Gravitational Wave Detector

The upcoming European design study `Einstein gravitational-wave Telescope' represents the first step towards a substantial, international effort for the design of a third-generation interferometric gravitational wave detector. It is generally believed that third-generation instruments might not be installed into existing infrastructures but will provoke a new search for optimal detector sites. Consequently, the detector design could be subject to fewer constraints than the on-going design of the second generation instruments. In particular, it will be prudent to investigate alternatives to the traditional L-shaped Michelson interferometer. In this article, we review an old proposal to use three Michelson interferometers in a triangular configuration. We use this example of a triple Michelson interferometer to clarify the terminology and will put this idea into the context of more recent research on interferometer technologies. Furthermore the benefits of a triangular detector will be used to motivate this design as a good starting point for a more detailed research effort towards a third-generation gravitational wave detector.Comment: Minor corrections to the main text and two additional appendices. 14 pages, 6 figure