Brillouin scattering studies in Fe3_3O4_4 across the Verwey transition

Brillouin scattering studies have been carried out on high quality single crystals of Fe$_3$O$_4$ with [100] and [110] faces in the temperature range of 300 to 30 K. The room temperature spectrum shows a surface Rayleigh wave (SRW) mode at 8 GHz and a longitudinal acoustic (LA) mode at 60 GHz. The SRW mode frequency shows a minimum at the Verwey transition temperature $T_V$ of 123 K. The softening of the SRW mode frequency from about 250 K to $T_V$ can be quantitatively understood as a result of a decrease in the shear elastic constant C$_{44}$, arising from the coupling of shear strain to charge fluctuations. On the other hand, the LA mode frequency does not show any significant change around $T_V$, but shows a large change in its intensity. The latter shows a maximum at around 120 K in the cooling run and at 165 K in the heating run, exhibiting a large hysteresis of 45 K. This significant change in intensity may be related to the presence of stress-induced ordering of Fe$^{3+}$ and Fe$^{2+}$ at the octahedral sites, as well as to stress-induced domain wall motion.Comment: 14 pages, 3 figures, accepted in Physical Review B 200

Control of defect-mediated tunneling barrier heights in ultrathin MgO films

The impact of oxygen vacancies on local tunneling properties across rf-sputtered MgO thin films was investigated by optical absorption spectroscopy and conducting atomic force microscopy. Adding O$_2$ to the Ar plasma during MgO growth alters the oxygen defect populations, leading to improved local tunneling characteristics such as a lower density of current hotspots and a lower tunnel current amplitude. We discuss a defect-based potential landscape across ultrathin MgO barriers.Comment: 4 pages, 4 figure

Porosity of silica Stöber particles determined by spin-echo small angle neutron scattering.

Stöber silica particles are used in a diverse range of applications. Despite their widespread industrial and scientific uses, information on the internal structure of the particles is non-trivial to obtain and is not often reported. In this work we have used spin-echo small angle neutron scattering (SESANS) in conjunction with ultra small angle X-ray scattering (USAXS) and pycnometry to study an aqueous dispersion of Stöber particles. Our results are in agreement with models which propose that Stöber particles have a porous core, with a significant fraction of the pores inaccessible to solvent. For samples prepared from the same master sample in a range of H2O : D2O ratio solutions we were able to model the SESANS results for the solution series assuming monodisperse, smooth surfaced spheres of radius 83 nm with an internal open pore volume fraction of 32% and a closed pore fraction of 10%. Our results are consistent with USAXS measurements. The protocol developed and discussed here shows that the SESANS technique is a powerful way to investigate particles much larger than those studied using conventional small angle scattering methods

Magnetoresistance through a single molecule

The use of single molecules to design electronic devices is an extremely challenging and fundamentally different approach to further downsizing electronic circuits. Two-terminal molecular devices such as diodes were first predicted [1] and, more recently, measured experimentally [2]. The addition of a gate then enabled the study of molecular transistors [3-5]. In general terms, in order to increase data processing capabilities, one may not only consider the electron's charge but also its spin [6,7]. This concept has been pioneered in giant magnetoresistance (GMR) junctions that consist of thin metallic films [8,9]. Spin transport across molecules, i.e. Molecular Spintronics remains, however, a challenging endeavor. As an important first step in this field, we have performed an experimental and theoretical study on spin transport across a molecular GMR junction consisting of two ferromagnetic electrodes bridged by a single hydrogen phthalocyanine (H2Pc) molecule. We observe that even though H2Pc in itself is nonmagnetic, incorporating it into a molecular junction can enhance the magnetoresistance by one order of magnitude to 52%.Comment: To appear in Nature Nanotechnology. Present version is the first submission to Nature Nanotechnology, from May 18th, 201

Ferromagnetic semiconductors

The current status and prospects of research on ferromagnetism in semiconductors are reviewed. The question of the origin of ferromagnetism in europium chalcogenides, chromium spinels and, particularly, in diluted magnetic semiconductors is addressed. The nature of electronic states derived from 3d of magnetic impurities is discussed in some details. Results of a quantitative comparison between experimental and theoretical results, notably for Mn-based III-V and II-VI compounds, are presented. This comparison demonstrates that the current theory of the exchange interactions mediated by holes in the valence band describes correctly the values of Curie temperatures T_C magnetic anisotropy, domain structure, and magnetic circular dichroism. On this basis, chemical trends are examined and show to lead to the prediction of semiconductor systems with T_C that may exceed room temperature, an expectation that are being confirmed by recent findings. Results for materials containing magnetic ions other than Mn are also presented emphasizing that the double exchange involving hoping through d states may operate in those systems.Comment: 18 pages, 8 figures; special issue of Semicon. Sci. Technol. on semiconductor spintronic

Spintronics: Fundamentals and applications

Spintronics, or spin electronics, involves the study of active control and manipulation of spin degrees of freedom in solid-state systems. This article reviews the current status of this subject, including both recent advances and well-established results. The primary focus is on the basic physical principles underlying the generation of carrier spin polarization, spin dynamics, and spin-polarized transport in semiconductors and metals. Spin transport differs from charge transport in that spin is a nonconserved quantity in solids due to spin-orbit and hyperfine coupling. The authors discuss in detail spin decoherence mechanisms in metals and semiconductors. Various theories of spin injection and spin-polarized transport are applied to hybrid structures relevant to spin-based devices and fundamental studies of materials properties. Experimental work is reviewed with the emphasis on projected applications, in which external electric and magnetic fields and illumination by light will be used to control spin and charge dynamics to create new functionalities not feasible or ineffective with conventional electronics.Comment: invited review, 36 figures, 900+ references; minor stylistic changes from the published versio

ITERATED QUASI-REVERSIBILITY METHOD APPLIED TO ELLIPTIC AND PARABOLIC DATA COMPLETION PROBLEMS

International audienceWe study the iterated quasi-reversibility method to regularize ill-posed elliptic and parabolic problems: data completion problems for Poisson's and heat equations. We define an abstract setting to treat both equations at once. We demonstrate the convergence of the regularized solution to the exact one, and propose a strategy to deal with noise on the data. We present numerical experiments for both problems: a two-dimensional corrosion detection problem and the one-dimensional heat equation with lateral data. In both cases, the method prove to be efficient even with highly corrupted data

Linking migration and hospital data in England: linkage process and evaluation of bias.

INTRODUCTION: Difficulties ascertaining migrant status in national data sources such as hospital records have limited large-scale evaluation of migrant healthcare needs in many countries, including England. Linkage of immigration data for migrants and refugees, with National Health Service (NHS) hospital care data enables research into the relationship between migration and health for a large cohort of international migrants. OBJECTIVES: We aimed to describe the linkage process and compare linkage rates between migrant sub-groups to evaluate for potential bias for data on non-EU migrants and resettled refugees linked to Hospital Episode Statistics (HES) in England. METHODS: We used stepwise deterministic linkage to match records from migrants and refugees to a unique healthcare identifier indicating interaction with the NHS (linkage stage 1 to NHS Personal Demographic Services, PDS), and then to hospital records (linkage stage 2 to HES). We calculated linkage rates and compared linked and unlinked migrant characteristics for each linkage stage. RESULTS: Of the 1,799,307 unique migrant records, 1,134,007 (63%) linked to PDS and 451,689 (25%) linked to at least one hospital record between 01/01/2005 and 23/03/2020. Individuals on work, student, or working holiday visas were less likely to link to a hospital record than those on settlement and dependent visas and refugees. Migrants from the Middle East and North Africa and South Asia were four times more likely to link to at least one hospital record, compared to those from East Asia and the Pacific. Differences in age, sex, visa type, and region of origin between linked and unlinked samples were small to moderate. CONCLUSION: This linked dataset represents a unique opportunity to explore healthcare use in migrants. However, lower linkage rates disproportionately affected individuals on shorter-term visas so future studies of these groups may be more biased as a result. Increasing the quality and completeness of identifiers recorded in administrative data could improve data linkage quality

Highlights of the Zeno Results from the USMP-2 Mission

The Zeno instrument, a High-precision, light-scattering spectrometer, was built to measure the decay rates of density fluctuations in xenon near its liquid-vapor critical point in the low-gravity environment of the U.S. Space Shuttle. Eliminating the severe density gradients created in a critical fluid by Earth's gravity, we were able to make measurements to within 100 microKelvin of the critical point. The instrument flew for fourteen days in March, 1994 on the Space Shuttle Columbia, STS-62 flight, as part of the very successful USMP-2 payload. We describe the instrument and document its performance on orbit, showing that it comfortably reached the desired 3 microKelvin temperature control of the sample. Locating the critical temperature of the sample on orbit was a scientific challenge; we discuss the advantages and short-comings of the two techniques we used. Finally we discuss problems encountered with making measurements of the turbidity of the sample, and close with the results of the measurement of the decay rates of the critical-point fluctuations