Topical clobetasol for the treatment of toxic epidermal necrolysis: study protocol for a randomized controlled trial.

BackgroundToxic epidermal necrolysis (TEN) is a rare systemic allergic drug eruption with high patient mortality. Currently, no established treatments have been shown to be effective for TEN beyond supportive care. Prior studies of systemic corticosteroids have yielded conflicting data, with some showing a possible benefit and others reporting in increased mortality. However, topical steroids have shown promise for treatment of ocular sequelae of TEN, such as scarring and vision loss. We have designed a randomized controlled trial to evaluate topical clobetasol for treatment of the epidermal manifestations of TEN. In addition, we propose genetic studies to characterize the TEN transcriptome and alterations in cutaneous gene expression that might occur following topical steroid treatment.Methods/designThis split-body randomized, double-blind, placebo-controlled Phase IIa proof-of-concept trial will evaluate the safety and efficacy of once-daily topical clobetasol applied to the skin of patients with TEN. This multicenter trial will recruit a total of 15 patients between the ages of 12 and 85 from the University of California Davis Medical Center and Shriners Hospital for Children inpatient burn units. Designated treatment areas on opposite sides of the body will be treated with blinded clobetasol 0.05% ointment or control petrolatum ointment daily for 14 days. On day 3 of therapy, a biopsy will be taken from the treated area for genetic studies. The primary study aims will be to establish the safety of topical clobetasol treatment and determine the time to cessation of skin detachment for the control and clobetasol-treated areas. Secondary endpoints will evaluate efficacy using parameters such as time to 90% re-epithelialization and percentage of affected skin at 0, 3, 6, 9, 12 and 15 days. Genomic DNA and RNA will be obtained from biopsy samples, to characterize the TEN transcriptome and identify changes in gene expression after topical steroid treatment.DiscussionTopical steroids have shown promise for treating ocular complications of TEN, but to date have not been evaluated for cutaneous manifestations of the disease. This trial will investigate clinical and molecular outcomes of topical clobetasol application and hopefully provide insight into the disease pathophysiology.Trial registrationClinicalTrials.gov NCT02319616. https://clinicaltrials.gov/ct2/show/NCT02351037

Mechanical properties of atomically thin boron nitride and the role of interlayer interactions

Atomically thin boron nitride (BN) nanosheets are important two-dimensional nanomaterials with many unique properties distinct from those of graphene, but investigation into their mechanical properties remains incomplete. Here we report that high-quality single-crystalline mono-and few-layer BN nanosheets are one of the strongest electrically insulating materials. More intriguingly, few-layer BN shows mechanical behaviours quite different from those of few-layer graphene under indentation. In striking contrast to graphene, whose strength decreases by more than 30% when the number of layers increases from 1 to 8, the mechanical strength of BN nanosheets is not sensitive to increasing thickness. We attribute this difference to the distinct interlayer interactions and hence sliding tendencies in these two materials under indentation. The significantly better interlayer integrity of BN nanosheets makes them a more attractive candidate than graphene for several applications, for example, as mechanical reinforcements

The Pioneer Anomaly

Radio-metric Doppler tracking data received from the Pioneer 10 and 11 spacecraft from heliocentric distances of 20-70 AU has consistently indicated the presence of a small, anomalous, blue-shifted frequency drift uniformly changing with a rate of ~6 x 10^{-9} Hz/s. Ultimately, the drift was interpreted as a constant sunward deceleration of each particular spacecraft at the level of a_P = (8.74 +/- 1.33) x 10^{-10} m/s^2. This apparent violation of the Newton's gravitational inverse-square law has become known as the Pioneer anomaly; the nature of this anomaly remains unexplained. In this review, we summarize the current knowledge of the physical properties of the anomaly and the conditions that led to its detection and characterization. We review various mechanisms proposed to explain the anomaly and discuss the current state of efforts to determine its nature. A comprehensive new investigation of the anomalous behavior of the two Pioneers has begun recently. The new efforts rely on the much-extended set of radio-metric Doppler data for both spacecraft in conjunction with the newly available complete record of their telemetry files and a large archive of original project documentation. As the new study is yet to report its findings, this review provides the necessary background for the new results to appear in the near future. In particular, we provide a significant amount of information on the design, operations and behavior of the two Pioneers during their entire missions, including descriptions of various data formats and techniques used for their navigation and radio-science data analysis. As most of this information was recovered relatively recently, it was not used in the previous studies of the Pioneer anomaly, but it is critical for the new investigation.Comment: 165 pages, 40 figures, 16 tables; accepted for publication in Living Reviews in Relativit

Target selection for the SUNS and DEBRIS surveys for debris discs in the solar neighbourhood

Debris discs - analogous to the Asteroid and Kuiper-Edgeworth belts in the Solar system - have so far mostly been identified and studied in thermal emission shortward of 100 um. The Herschel space observatory and the SCUBA-2 camera on the James Clerk Maxwell Telescope will allow efficient photometric surveying at 70 to 850 um, which allow for the detection of cooler discs not yet discovered, and the measurement of disc masses and temperatures when combined with shorter wavelength photometry. The SCUBA-2 Unbiased Nearby Stars (SUNS) survey and the DEBRIS Herschel Open Time Key Project are complimentary legacy surveys observing samples of ~500 nearby stellar systems. To maximise the legacy value of these surveys, great care has gone into the target selection process. This paper describes the target selection process and presents the target lists of these two surveys.Comment: 67 pages with full tables, 7 figures, accepted to MNRA

Layer-dependent mechanical properties and enhanced plasticity in the van der Waals chromium trihalide magnets

The mechanical properties of magnetic materials are instrumental for the development of the magnetoelastic theory and the optimization of strain-modulated magnetic devices. In particular, two-dimensional (2D) magnets hold promise to enlarge these concepts into the realm of low-dimensional physics and ultrathin devices. However, no experimental study on the intrinsic mechanical properties of the archetypal 2D magnet family of the chromium trihalides has thus far been performed. Here, we report the room temperature layer-dependent mechanical properties of atomically thin CrI3 and CrCl3, finding that bilayers of CrI3 and CrCl3 have Young's moduli of 62.1 GPa and 43.4 GPa, with the highest sustained strain of 6.09% and 6.49% and breaking strengths of 3.6 GPa and 2.2 GPa, respectively. Both the elasticity and strength of the two materials decrease with increased thickness, which is attributed to a weak interlayer interaction that enables interlayer sliding under low levels of applied load. The mechanical properties observed in the few-layer chromium trihalide crystals provide evidence of outstanding plasticity in these materials, which is qualitatively demonstrated in their bulk counterparts. This study will contribute to various applications of the van der Waals magnetic materials, especially for their use in magnetostrictive and flexible devices.Comment: Main text and supplementary informatio

Photography-based taxonomy is inadequate, unnecessary, and potentially harmful for biological sciences

The question whether taxonomic descriptions naming new animal species without type specimen(s) deposited in collections should be accepted for publication by scientific journals and allowed by the Code has already been discussed in Zootaxa (Dubois & Nemésio 2007; Donegan 2008, 2009; Nemésio 2009a–b; Dubois 2009; Gentile & Snell 2009; Minelli 2009; Cianferoni & Bartolozzi 2016; Amorim et al. 2016). This question was again raised in a letter supported by 35 signatories published in the journal Nature (Pape et al. 2016) on 15 September 2016. On 25 September 2016, the following rebuttal (strictly limited to 300 words as per the editorial rules of Nature) was submitted to Nature, which on 18 October 2016 refused to publish it. As we think this problem is a very important one for zoological taxonomy, this text is published here exactly as submitted to Nature, followed by the list of the 493 taxonomists and collection-based researchers who signed it in the short time span from 20 September to 6 October 2016

Mechanical Properties of Atomically Thin Tungsten Dichalcogenides::WS2, WSe2, and WTe2

Two-dimensional (2D) tungsten disulfide (WS$_2$), tungsten diselenide (WSe$_2$), and tungsten ditelluride (WTe$_2$) draw increasing attention due to their attractive properties deriving from the heavy tungsten and chalcogenide atoms, but their mechanical properties are still mostly unknown. Here, we determine the intrinsic and air-aged mechanical properties of mono-, bi-, and trilayer (1-3L) WS$_2$, WSe$_2$ and WTe$_2$ using a complementary suite of experiments and theoretical calculations. High-quality 1L WS$_2$ has the highest Young's modulus (302.4+-24.1 GPa) and strength (47.0+-8.6 GPa) of the entire family, overpassing those of 1L WSe$_2$ (258.6+-38.3 and 38.0+-6.0 GPa, respectively) and WTe$_2$ (149.1+-9.4 and 6.4+-3.3 GPa, respectively). However, the elasticity and strength of WS$_2$ decrease most dramatically with increased thickness among the three materials. We interpret the phenomenon by the different tendencies for interlayer sliding in equilibrium state and under in-plane strain and out-of-plane compression conditions in the indentation process, revealed by finite element method (FEM) and density functional theory (DFT) calculations including van der Waals (vdW) interactions. We also demonstrate that the mechanical properties of the high-quality 1-3L WS$_2$ and WSe$_2$ are largely stable in the air for up to 20 weeks. Intriguingly, the 1-3L WSe$_2$ shows increased modulus and strength values with aging in the air. This is ascribed to oxygen doping, which reinforces the structure. The present study will facilitate the design and use of 2D tungsten dichalcogenides in applications, such as strain engineering and flexible field-effect transistors (FETs)

EPR and optical spectroscopy of neodymium ions in KMgF3 and KZnF3 crystals

KMgF3 and KZnF3 crystals doped with Nd3+ ions were studied using EPR and optical spectroscopy methods. Several types of paramagnetic centers of Nd3+: KMgF3 - two of tetragonal and one of rhombic symmetry; KZnF3 - one of tetragonal and one of trigonal symmetry were found. Parameters of the corresponding spin Hamiltonians were determined. Using optical spectroscopy paramagnetic centers Nd2+ and Nd4+ in KMgF3 were found. © 1993 Springer

Using Interpolation to Estimate System Uncertainty in Gene Expression Experiments

The widespread use of high-throughput experimental assays designed to measure the entire complement of a cell's genes or gene products has led to vast stores of data that are extremely plentiful in terms of the number of items they can measure in a single sample, yet often sparse in the number of samples per experiment due to their high cost. This often leads to datasets where the number of treatment levels or time points sampled is limited, or where there are very small numbers of technical and/or biological replicates. Here we introduce a novel algorithm to quantify the uncertainty in the unmeasured intervals between biological measurements taken across a set of quantitative treatments. The algorithm provides a probabilistic distribution of possible gene expression values within unmeasured intervals, based on a plausible biological constraint. We show how quantification of this uncertainty can be used to guide researchers in further data collection by identifying which samples would likely add the most information to the system under study. Although the context for developing the algorithm was gene expression measurements taken over a time series, the approach can be readily applied to any set of quantitative systems biology measurements taken following quantitative (i.e. non-categorical) treatments. In principle, the method could also be applied to combinations of treatments, in which case it could greatly simplify the task of exploring the large combinatorial space of future possible measurements