Shear deformation of amorphous and nanocrystalline copper microstructures via atomistic simulation

Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2007.Includes bibliographical references (p. 24).In the well-known Hall-Petch behavior, yield and flow stresses in polycrystalline metals increase with a decrease in grain size. As grain size continues to decrease, mechanical strength peaks. As grain size further decreases, mechanical strength begins to decrease. As grain size approaches zero, the total structure is composed of an increasingly high percentage of grain boundaries, which exhibit the properties of an amorphous structure. Molecular dynamics simulations, with the goal of exploring this behavior, were performed on nanocrystalline and amorphous microstructures using the embedded atom potential developed by Mishin et al. A 0.2 shear strain was applied to each of the nanocrystalline and amorphous samples. From these simulations, we have observed the inverse Hall-Petch behavior of nanocrystalline structures. We have also shown that the amorphous structure as zero grain size is reasonable as the limiting case for the inverse Hall-Petch trends in nanocrystalline structures.by David R. Gandy.S.B

Variations in pre-analytical FFPE sample processing and bioinformatics: challenges for next generation molecular diagnostic testing in clinical pathology

Advances in cellular pathology techniques will improve diagnostic medicine. However, such improvements have to overcome many challenges including variations in pre-analytical sample processing, bioinformatics data analysis and clinical interpretation of data. In order to resolve such challenges, bioinformatics needs to become more tightly coupled to the experimental methodology development

‘Our voice started off as a whisper and now it is a great big roar’ : The Salford Dementia Associate Panel as a model of involvement in research activities

This paper presents the work of the ‘Salford Dementia Associate Panel’, based at the Salford Institute for Dementia, Salford University (UK). We discuss the roles of the Dementia Associates, in particular around the areas of engagement and research. The panel is made up of people living with dementia, and current and former care partners. It highlights the development of this group over a four-year period and demonstrates over time how the role of a Dementia Associate member has evolved. The panel is involved in research, education and public engagement activities conducted by staff and students within the Institute. The motivations for becoming involved are clearly articulated and demonstrate how the personal backgrounds of individuals have driven the collective involvement and desire to bring about change. The benefits and challenges associated with working as part of a panel are discussed. We conclude by bringing together our experiences as a set of suggestions for others who may wish to create a similar forum to promote the involvement of people living with dementia and former and current care partners

The precautions of clinical waste: disposable medical sharps in the United Kingdom

This article deals with recent changes in UK guidance on clinical waste, in particular a shift to disposable, single-use instruments and sharps. I use interviews conducted with nurses from a GP practice and two clinical waste managers at alternative treatment and incineration sites as a springboard for reflection on the relationship between the legislation on clinical waste management and its implementation. Scrutinizing the UK guidance, European legislation and World Health Organization principles, I draw out interviewees’ concerns that the changed practices lead to an expansion of the hazardous waste category, with an increased volume going to incineration. This raises questions regarding the regulations’ environmental and health effects, and regarding the precautionary approach embedded in the regulations. Tracing the diverse reverberations of the term ‘waste’ in different points along the journeys made by sharps in particular, and locating these questions in relation to existing literature on waste, I emphasize that public health rationales for the new practices are not made clear in the guidance. I suggest that this relative silence on the subject conceals both the uncertainties regarding the necessity for these means of managing the risks of infectious waste, and the tensions between policies of precautionary public health and environmental sustainability

Investigating the biological properties of carbohydrate derived fulvic acid (CHD-FA) as a potential novel therapy for the management of oral biofilm infections.

Background: A number of oral diseases, including periodontitis, derive from microbial biofilms and are associated with increased antimicrobial resistance. Despite the widespread use of mouthwashes being used as adjunctive measures to control these biofilms, their prolonged use is not recommended due to various side effects. Therefore, alternative broad-spectrum antimicrobials that minimise these effects are highly sought after. Carbohydrate derived fulvic acid (CHD-FA) is an organic acid which has previously demonstrated to be microbiocidal against Candida albicans biofilms, therefore, the aims of this study were to evaluate the antibacterial activity of CHD-FA against orally derived biofilms and to investigate adjunctive biological effects.<p></p> Methods: Minimum inhibitory concentrations were evaluated for CHD-FA and chlorhexidine (CHX) against a range of oral bacteria using standardised microdilution testing for planktonic and sessile. Scanning electron microscopy was also employed to visualise changes in oral biofilms after antimicrobial treatment. Cytotoxicity of these compounds was assessed against oral epithelial cells, and the effect of CHD-FA on host inflammatory markers was assessed by measuring mRNA and protein expression.<p></p> Results: CHD-FA was highly active against all of the oral bacteria tested, including Porphyromonas gingivalis, with a sessile minimum inhibitory concentration of 0.5%. This concentration was shown to kill multi-species biofilms by approximately 90%, levels comparable to that of chlorhexidine (CHX). In a mammalian cell culture model, pretreatment of epithelial cells with buffered CHD-FA was shown to significantly down-regulate key inflammatory mediators, including interleukin-8 (IL-8), after stimulation with a multi-species biofilm.<p></p> Conclusions: Overall, CHD-FA was shown to possess broad-spectrum antibacterial activity, with a supplementary function of being able to down-regulate inflammation. These properties offer an attractive spectrum of function from a naturally derived compound, which could be used as an alternative topical treatment strategy for oral biofilm diseases. Further studies in vitro and in vivo are required to determine the precise mechanism by which CHD-FA modulates the host immune response.<p></p&gt

Investigation of Ultrasound-Measured Flow Velocity, Flow Rate and Wall Shear Rate in Radial and Ulnar Arteries Using Simulation

Parameters of blood flow measured by ultrasound in radial and ulnar arteries, such as flow velocity, flow rate and wall shear rate, are widely used in clinical practice and clinical research. Investigation of these measurements is useful for evaluating accuracy and providing knowledge of error sources. A method for simulating the spectral Doppler ultrasound measurement process was developed with computational fluid dynamics providing flow-field data. Specific scanning factors were adjusted to investigate their influence on estimation of the maximum velocity waveform, and flow rate and wall shear rate were derived using the Womersley equation. The overestimation in maximum velocity increases greatly (peak systolic from about 10% to 30%, time-averaged from about 30% to 50%) when the beam-vessel angle is changed from 30° to 70°. The Womersley equation was able to estimate flow rate in both arteries with less than 3% error, but performed better in the radial artery (2.3% overestimation) than the ulnar artery (15.4% underestimation) in estimating wall shear rate. It is concluded that measurements of flow parameters in the radial and ulnar arteries with clinical ultrasound scanners are prone to clinically significant errors.</p

Iron phosphate glasses: Bulk properties and atomic scale structure

Bulk properties such as glass transition temperature, density and thermal expansion of iron phosphate glass compositions, with replacement of Cs by Ba, are investigated as a surrogate for the transmutation of 137Cs to 137Ba, relevant to the immobilisation of Cs in glass. These studies are required to establish the appropriate incorporation rate of 137Cs in iron phosphate glass. Density and glass transition temperature increases with the addition of BaO indicating the shrinkage and reticulation of the iron phosphate glass network. The average thermal expansion coefficient reduces from 19.8 × 10−6 K−1 to 13.4 × 10−6 K−1, when 25 wt. % of Cs2O was replaced by 25 wt. % of BaO in caesium loaded iron phosphate glass. In addition to the above bulk properties, the role of Ba as a network modifier in the structure of iron phosphate glass is examined using various spectroscopic techniques. The FeII content and average coordination number of iron in the glass network was estimated using Mössbauer spectroscopy. The FeII content in the un-doped iron phosphate glass and barium doped iron phosphate glasses was 20, 21 and 22 ± 1% respectively and the average Fe coordination varied from 5.3 ± 0.2 to 5.7 ± 0.2 with increasing Ba content. The atomic scale structure was further probed by Fe K-edge X-ray absorption spectroscopy. The average coordination number provided by extended X-ray absorption fine structure spectroscopy and X-ray absorption near edge structure was in good agreement with that given by the Mössbauer data

An Alumni survey of the School of Social Work, Portland State University

The alumni survey conducted at Portland State University School of Social Work by second year students had two purposes. One purpose was to fulfill the research practicum requirements of a Masters of Social Work degree by providing experience in the area of applied survey research. The other was to provide a data base for future alumni research at the school

Imaging in Vascular Access

This review examines four imaging modalities; ultrasound (US), digital subtraction angiography (DSA), magnetic resonance imaging (MRI) and computed tomography (CT), that have common or potential applications in vascular access (VA). The four modalities are reviewed under their primary uses, techniques, advantages and disadvantages, and future directions that are specific to VA. Currently, US is the most commonly used modality in VA because it is cheaper (relative to other modalities), accessible, non-ionising, and does not require the use of contrast agents. DSA is predominantly only performed when an intervention is indicated. MRI is limited by its cost and the time required for image acquisition that mainly confines it to the realm of research where high resolution is required. CT’s short acquisition times and high resolution make it useful as a problem-solving tool in complex cases, although accessibility can be an issue. All four imaging modalities have advantages and disadvantages that limit their use in this particular patient cohort. Current imaging in VA comprises an integrated approach with each modality providing particular uses dependent on their capabilities. MRI and CT, which currently have limited use, may have increasingly important future roles in complex cases where detailed analysis is required