Recombination Ghosts in Littrow Configuration: Implications for Spectrographs Using Volume Phase Holographic Gratings

We report the discovery of optical ghosts generated when using Volume Phase Holographic (VPH) gratings in spectrographs employing the Littrow configuration. The ghost is caused by light reflected off the detector surface, recollimated by the camera, recombined by, and reflected from, the grating and reimaged by the camera onto the detector. This recombination can occur in two different ways. We observe this ghost in two spectrographs being developed by the University of Wisconsin - Madison: the Robert Stobie Spectrograph for the Southern African Large Telescope and the Bench Spectrograph for the WIYN 3.5m telescope. The typical ratio of the brightness of the ghost relative to the integrated flux of the spectrum is of order 10^-4, implying a recombination efficiency of the VPH gratings of order 10^-3 or higher, consistent with the output of rigorous coupled wave analysis. Any spectrograph employing VPH gratings, including grisms, in Littrow configuration will suffer from this ghost, though the general effect is not intrinsic to VPH gratings themselves and has been observed in systems with conventional gratings in non-Littrow configurations. We explain the geometric configurations that can result in the ghost as well as a more general prescription for predicting its position and brightness on the detector. We make recommendations for mitigating the ghost effects for spectrographs and gratings currently built. We further suggest design modifications for future VPH gratings to eliminate the problem entirely, including tilted fringes and/or prismatic substrates. We discuss the resultant implications on the spectrograph performance metrics.Comment: 13 pages, 8 figures, emulateapj style, accepted for publication in PAS

Charge oscillation-induced light transmission through subwavelength slits and holes

We present a concrete picture of spoof surface plasmons (SSPs) combined with cavity resonance to clarify the basic mechanism underlying extraordinary light transmission through metal films with subwavelength slits or holes. This picture may indicate a general mechanism of metallic nanostructure optics: When light is incident on a non-planar conducting surface, the free electrons cannot move homogeneously in response to the incident electric field, i.e., their movement can be impeded at the rough parts, forming inhomogeneous charge distributions. The oscillating charges/dipoles then emit photons (similar to Thomson scattering of x rays by oscillating electrons), and the interference between the photons may give rise to anomalous transmission, reflection or scattering.Comment: 4 pages, 4 figures, are "surface plasmons" true for conducting structures? Answere is here. Also see the new arXiv:0903.3565v1, the expansion of this pape

High reflectivity grating waveguide coatings for 1064nm

We propose thin single-layer grating waveguide structures to be used as high-reflectivity, but low thermal noise, alternative to conventional coatings for gravitational wave detector test mass mirrors. Grating waveguide (GWG) coatings can show a reflectivity of up to 100% with an overall thickness of less than a wavelength. We theoretically investigate GWG coatings for 1064nm based on tantala (Ta2O5) on a Silica substrate focussing on broad spectral response and low thickness

Demonstration of 3-port grating phase relations

We experimentally demonstrate the phase relations of 3-port gratings by investigating 3-port coupled Fabry-Perot cavities. Two different gratings which have the same 1st order diffraction efficiency but differ substantially in their 2nd order diffraction efficiency have been designed and manufactured. Using the gratings as couplers to Fabry-Perot cavities we could validate the results of an earlier theoretical description of the phases at a three port grating

Impedance model for the polarization-dependent optical absorption of superconducting single-photon detectors

We measured the single-photon detection efficiency of NbN superconducting single photon detectors as a function of the polarization state of the incident light for different wavelengths in the range from 488 nm to 1550 nm. The polarization contrast varies from ~5% at 488 nm to ~30% at 1550 nm, in good agreement with numerical calculations. We use an optical-impedance model to describe the absorption for polarization parallel to the wires of the detector. For lossy NbN films, the absorption can be kept constant by keeping the product of layer thickness and filling factor constant. As a consequence, we find that the maximum possible absorption is independent of filling factor. By illuminating the detector through the substrate, an absorption efficiency of ~70% can be reached for a detector on Si or GaAs, without the need for an optical cavity.Comment: 15 pages, 5 figures, submitted to Journal of Applied Physic

Factors Affecting Females’ Green Purchasing Behavior of Green Cosmetics in Bahrain

This study analyzed the factors influencing green purchasing behavior among Bahraini women toward eco- friendly cosmetics. A conceptual model integrating planned behavior theory and value-belief-norm theory was used to survey 400 women. Positive attitudes towards eco-friendly cosmetics were prevalent, with high levels of purchases due to health and environmental benefits. The study confirmed all hypotheses of the conceptual model, which included four independent variables: attitudes, subjective norms, perceived behavioral control, and environmental beliefs, and a key dependent variable of green purchasing behavior. The study recommends that cosmetics companies prioritize environmental sustainability by using natural and organic product components, eco-friendly packaging, and cruelty-free products in order to promote green purchasing behavior among female consumers in Bahrain

Surface plasmon polaritons on deep, narrow-ridged rectangular gratings

Copyright © 2009 Optical Society of America. This paper was published in Journal of the Optical Society of America B and is made available as an electronic reprint with the permission of OSA. The paper can be found at the following URL on the OSA website: http://www.opticsinfobase.org/josab/abstract.cfm?URI=josab-26-6-1228 Systematic or multiple reproduction or distribution to multiple locations via electronic or other means is prohibited and is subject to penalties under law.The dispersion diagrams of surface plasmon polaritons have been calculated for rectangular gratings, with very narrow wires, of varying depths. For gratings with a moderate height a family of vertical-standing-wave resonances may be excited, which consist of surface plasmons, oscillating on either vertical surface, coupling together through the metal wires. These modes evolve similarly to the manner in which shallow-grating surface-plasmon dispersion curves evolve into cavity modes in the grooves of the structure. However, on further increase in grating height these vertical standing waves evolve into a second resonant feature, which is independent of yet further increases in height. This new mode is shown to be equivalent to the resonances found on infinite multilayer metal/dielectric structures illuminated at normal incidence

Optical resonances on sub-wavelength silver lamellar gratings

Copyright © 2008 Optical Society of America. This paper was published in Optics Express and is made available as an electronic reprint with the permission of OSA. The paper can be found at the following URL on the OSA website: http://www.opticsinfobase.org/abstract.cfm?URI=oe-16-26-22003 Systematic or multiple reproduction or distribution to multiple locations via electronic or other means is prohibited and is subject to penalties under law.The optical response of sub-wavelength silver lamellar gratings has been theoretically investigated. Two distinct types of resonance have been predicted for incident radiation with E-field perpendicular to the long axis of the wires. The first resonance has been identified as a cavity mode resonance that is associated with transmission enhancement. The second resonance has been identified as an entirely new horizontal plasmon resonance on the incident (and transmission) surfaces of the wires of the grating. Normal surface plasmon modes are investigated on discontinuous gratings, and their relation to those found on continuous gratings is highlighted by focusing on the perturbation effect of the discontinuities. It is shown that the new horizontal plasmon mode is in no way related to the well known diffractively coupled surface plasmon, and is shown to have a particle plasmon-like nature. It is therefore termed a horizontal particle plasmon, and may be either an uncoupled horizontal particle plasmon resonance (a 1-dimensional particle plasmon) or a coupled horizontal particle plasmon resonance (a 2-dimensional particle plasmon) depending on the height of the grating. It is shown that this resonance may result in a reflection efficiency that is very high, even when the grating would be optically thin if it were a homogeneous film, therefore, it behaves as an inverse wire grid polariser as it reflects more TM than TE incident radiation

Resonant Thermoelectric Nanophotonics

Photodetectors are typically based either on photocurrent generation from electron–hole pairs in semiconductor structures or on bolometry for wavelengths that are below bandgap absorption. In both cases, resonant plasmonic and nanophotonic structures have been successfully used to enhance performance. Here, we show subwavelength thermoelectric nanostructures designed for resonant spectrally selective absorption, which creates large localized temperature gradients even with unfocused, spatially uniform illumination to generate a thermoelectric voltage. We show that such structures are tunable and are capable of wavelength-specific detection, with an input power responsivity of up to 38 V W^(–1), referenced to incident illumination, and bandwidth of nearly 3 kHz. This is obtained by combining resonant absorption and thermoelectric junctions within a single suspended membrane nanostructure, yielding a bandgap-independent photodetection mechanism. We report results for both bismuth telluride/antimony telluride and chromel/alumel structures as examples of a potentially broader class of resonant nanophotonic thermoelectric materials for optoelectronic applications such as non-bandgap-limited hyperspectral and broadband photodetectors