Design and analysis of a piezoelectric film embedded smart cutting tool

This is the author's accepted manuscript. The final published article is available from the link below. Copyright @ 2012 Institution of Mechanical Engineers.The condition of a cutting tool is an important factor for manufacturing processes. Tool wear has a strong influence on the cutting forces, resulting in poor surface roughness and dimensional accuracy of the workpiece. Therefore, the use of a dynamometer to measure cutting forces is a well-known approach, but it has several limitations such as high cost, poor performance in harsh industrial machining environments and possible interference with cutting dynamics. This article presents a novel smart cutting tool using a separate single-layer piezoelectric film as the sensing unit to detect the orthogonal cutting force. Simulations were performed to validate the feasibility of the proposed design, and the model was also able to detect better force measurement sensitivity. Furthermore, cutting trials were carried out to validate cutting tool performance experimentally

Design of an instrumented smart cutting tool and its implementation and application perspectives

This paper presents an innovative design of a smart cutting tool, using two surface acoustic wave (SAW) strain sensors mounted onto the top and the side surface of the tool shank respectively, and its implementation and application perspectives. This surface acoustic wave-based smart cutting tool is capable of measuring the cutting force and the feed force in a real machining environment, after a calibration process under known cutting conditions. A hybrid dissimilar workpiece is then machined using the SAW-based smart cutting tool. The hybrid dissimilar material is made of two different materials, NiCu alloy (Monel) and steel, welded together to form a single bar; this can be used to simulate an abrupt change in material properties. The property transition zone is successfully detected by the tool; the sensor feedback can then be used to initiate a change in the machining parameters to compensate for the altered material properties.The UK Technology Strategy Board (TSB) for supporting this research (SEEM Project, contract No. BD266E

Metallic Triple Beam Resonator with Thick-film Printed Drive and Pickup

A triple beam resonator fabricated in 430S17 stainless steel with thick-film piezoelectric elements to drive and detect the vibrations is presented. The resonator substrate was fabricated by a simultaneous, double-sided photochemical etching technique and the thick-film piezoelectric elements were deposited by a standard screen-printing process. The combination of these two batch-fabrication processes provides the opportunity for mass production of the device at low cost. The resonator, a dynamically balanced triple beam tuning fork (TBTF) structure 23.5 mm long and 6.5 mm wide, has a favoured mode at 4.96 kHz with a Q-factor of 3630 operating in air

Topological Modes in Dual Lattice Models

Lattice gauge theory with gauge group $Z_{P}$ is reconsidered in four dimensions on a simplicial complex $K$. One finds that the dual theory, formulated on the dual block complex $\hat{K}$, contains topological modes which are in correspondence with the cohomology group $H^{2}(\hat{K},Z_{P})$, in addition to the usual dynamical link variables. This is a general phenomenon in all models with single plaquette based actions; the action of the dual theory becomes twisted with a field representing the above cohomology class. A similar observation is made about the dual version of the three dimensional Ising model. The importance of distinct topological sectors is confirmed numerically in the two dimensional Ising model where they are parameterized by $H^{1}(\hat{K},Z_{2})$.Comment: 10 pages, DIAS 94-3

Ion Charge States in Halo CMEs: What can we Learn about the Explosion?

We describe a new modeling approach to develop a more quantitative understanding of the charge state distributions of the ions of various elements detected in situ during halo Coronal Mass Ejection (CME) events by the Advanced Composition Explorer (ACE) satellite. Using a model CME hydrodynamic evolution based on observations of CMEs propagating in the plane of the sky and on theoretical models, we integrate time dependent equations for the ionization balance of various elements to compare with ACE data. We find that plasma in the CME ``core'' typically requires further heating following filament eruption, with thermal energy input similar to the kinetic energy input. This extra heating is presumably the result of post eruptive reconnection. Plasma corresponding to the CME ``cavity'' is usually not further ionized, since whether heated or not, the low density gives freeze-in close the the Sun. The current analysis is limited by ambiguities in the underlying model CME evolution. Such methods are likely to reach their full potential when applied to data to be acquired by STEREO when at optimum separation. CME evolution observed with one spacecraft may be used to interpret CME charge states detected by the other.Comment: 20 pages, accepted by Ap

The influence of work placement on the academic achievement of undergraduate design students

The aim of this paper is to investigate the contribution of work placement in enhancing the academic performance of undergraduate design students. A statistical analysis was carried out on a population sample which comprised design students who had graduated at Brunel University London in four different academic years. All the required (anonymous) data were obtained from the university electronic records system. The dataset comprises a total of 411 students, of which 323 were placement students and 88 non-placement students. Students were also classified as higher achievers (students whose second year average mark was 60% or above) and lower achievers. The results seem to suggest that for both higher and lower achievers the placement experience enables students to achieve on average a greater final year mark and a greater improvement from the second to the final year. The study also established that these grade gains were of a similar magnitude irrespective of the students overall academic standing. Finally, the results of this study seem to suggest that the work placement experience give students a particular advantage in the final year project and in the modules characterized by design-focused assessment components

Palytoxin acts on Na(+),K (+)-ATPase but not nongastric H(+),K (+)-ATPase

Palytoxin (PTX) opens a pathway for ions to pass through Na,K-ATPase. We investigate here whether PTX also acts on nongastric H,K-ATPases. The following combinations of cRNA were expressed in Xenopus laevis oocytes: Bufo marinus bladder H,K-ATPase alpha(2)- and Na,K-ATPase beta(2)-subunits; Bufo Na,K-ATPase alpha(1)- and Na,K-ATPase beta(2)-subunits; and Bufo Na,K-ATPase beta(2)-subunit alone. The response to PTX was measured after blocking endogenous Xenopus Na,K-ATPase with 10 microM ouabain. Functional expression was confirmed by measuring (86)Rb uptake. PTX (5 nM: ) produced a large increase of membrane conductance in oocytes expressing Bufo Na,K-ATPase, but no significant increase occurred in oocytes expressing Bufo H,K-ATPase or in those injected with Bufo beta(2)-subunit alone. Expression of the following combinations of cDNA was investigated in HeLa cells: rat colonic H,K-ATPase alpha(1)-subunit and Na,K-ATPase beta(1)-subunit; rat Na,K-ATPase alpha(2)-subunit and Na,K-ATPase beta(2)-subunit; and rat Na,K-ATPase beta(1)- or Na,K-ATPase beta(2)-subunit alone. Measurement of increases in (86)Rb uptake confirmed that both rat Na,K and H,K pumps were functional in HeLa cells expressing rat colonic HKalpha(1)/NKbeta(1) and NKalpha(2)/NKbeta(2). Whole-cell patch-clamp measurements in HeLa cells expressing rat colonic HKalpha(1)/NKbeta(1) exposed to 100 nM PTX showed no significant increase of membrane current, and there was no membrane conductance increase in HeLa cells transfected with rat NKbeta(1)- or rat NKbeta(2)-subunit alone. However, in HeLa cells expressing rat NKalpha(2)/NKbeta(2), outward current was observed after pump activation by 20 mM K(+) and a large membrane conductance increase occurred after 100 nM PTX. We conclude that nongastric H,K-ATPases are not sensitive to PTX when expressed in these cells, whereas PTX does act on Na,K-ATPase

On Dijkgraaf-Witten Type Invariants

We explicitly construct a series of lattice models based upon the gauge group $Z_{p}$ which have the property of subdivision invariance, when the coupling parameter is quantized and the field configurations are restricted to satisfy a type of mod-$p$ flatness condition. The simplest model of this type yields the Dijkgraaf-Witten invariant of a $3$-manifold and is based upon a single link, or $1$-simplex, field. Depending upon the manifold's dimension, other models may have more than one species of field variable, and these may be based on higher dimensional simplices.Comment: 18 page

State Sum Models and Simplicial Cohomology

We study a class of subdivision invariant lattice models based on the gauge group $Z_{p}$, with particular emphasis on the four dimensional example. This model is based upon the assignment of field variables to both the $1$- and $2$-dimensional simplices of the simplicial complex. The property of subdivision invariance is achieved when the coupling parameter is quantized and the field configurations are restricted to satisfy a type of mod-$p$ flatness condition. By explicit computation of the partition function for the manifold $RP^{3} \times S^{1}$, we establish that the theory has a quantum Hilbert space which differs from the classical one.Comment: 28 pages, Latex, ITFA-94-13, (Expanded version with two new sections

Elemental Abundances in the Possible Type Ia Supernova Remnant G344.7-0.1

Recent studies on the Galactic supernova remnant (SNR) G344.7-0.1 have commonly claimed its origin to be a core-collapse supernova (SN) explosion, based on its highly asymmetric morphology and/or proximity to a star forming region. In this paper, however, we present an X-ray spectroscopic study of this SNR using Suzaku, which is supportive of a Type Ia origin. Strong K-shell emission from lowly ionized Fe has clearly been detected, and its origin is determined, for the first time, to be the Fe-rich SN ejecta. The abundance pattern is highly consistent with that expected for a somewhat-evolved Type Ia SNR. It is suggested, therefore, that the X-ray point-like source CXOU J170357.8-414302 located at the SNR's geometrical center is not associated with the SNR but is likely to be a foreground object. Our result further indicates that G344.7-0.1 is the first possible Type Ia SNR categorized as a member of the so-called "mixed-morphology" class. In addition, we have detected emission from He-like Al at ~1.6 keV, the first clear detection of this element in the spectrum of an extended X-ray source. The possible enhancement of the Al/Mg abundance ratio from the solar value suggests that the ambient interstellar medium has a relatively high metallicity (not less than 10% of the solar value), if this SNR has indeed a Type Ia origin. We also report marginal detection of Cr and Mn, although the measured fluxes have large statistical and systematic uncertainties.Comment: ApJ in pres