Design, characterization, and fabrication of solar-retroreflective cool-wall materials

Raising urban albedo increases the fraction of incident sunlight returned to outer space, cooling cities and their buildings. We evaluated the angular distribution of solar radiation incident on exterior walls in 17 U S. climates to develop performance parameters for solar-retroreflective walls, then applied first-principle physics and ray-tracing simulations to explore designs. Our analysis indicates that retroreflective walls must function at large incidence angles to reflect a substantial portion of summer sunlight, and that this will be difficult to attain with materials that rely on total internal reflection. Gonio-spectrophotometer measurements of the solar spectral bi-directional reflectivity of a bicycle reflector showed little to no retroreflection at large incidence angles. Visual comparisons of retroreflection to specular first-surface reflection for four different retroreflective safety films using violet and green lasers suggest their retroreflection to be no greater than 0.09 at incidence angles up to 45°, and no greater than 0.30 at incidence angles of up to 70°. Attempts to produce a two-surface retroreflector with orthogonal mirror grooves by cutting and polishing an aluminum block indicate that residual surface roughness impedes retroreflection. Ongoing efforts focus on forming orthogonal surfaces with aluminized Mylar film, a material with very high specular reflectance across the solar spectrum. We investigated (1) folding or stamping a free film; (2) adhering the film to a pre-shaped substrate; or (3) attaching the film to a flat ductile substrate, then shaping. The latter two methods were more successful but yielded imperfect right angles

Make it so! Jean-Luc Picard, Bart Simpson and the design of e-public services

In this paper, we report on a project applying participatory design methods to include people who have experience of social exclusion (in one form or another) in designing possible technologies for e-(local)-government services. The work was part of a project for the Office of the Deputy Prime Minister in the UK, and was concerned with ‘access tokens’ that can provide personal identification for individuals accessing public services, based on technologies such as multi-functional smartcards, flash memory sticks, mobile phone SIMs or similar devices. In particular we report on our experience using the ‘pastiche scenarios’ technique recently developed by Mark Blythe. Our findings indicate that the technique can be effective and engaging in helping people to create realistic scenarios of future technology use and highlight some possible pitfalls to consider when using this technique.</p

Use of computer-aided detection (CAD) tools in screening mammography: a multidisciplinary investigation

We summarise a set of analyses and studies conducted to assess the effects of the use of a computer-aided detection (CAD) tool in breast screening. We have used an interdisciplinary approach that combines: (a) statistical analyses inspired by reliability modelling in engineering; (b) experimental studies of decisions of mammography experts using the tool, interpreted in the light of human factors psychology; and (c) ethnographic observations of the use of the tool both in trial conditions and in everyday screening practice. Our investigations have shown patterns of human behaviour and effects of computer-based advice that would not have been revealed by a standard clinical trial approach. For example, we found that the negligible measured effect of CAD could be explained by a range of effects on experts' decisions, beneficial in some cases and detrimental in others. There is some evidence of the latter effects being due to the experts using the computer tool differently from the intentions of the developers. We integrate insights from the different pieces of evidence and highlight their implications for the design, evaluation and deployment of this sort of computer tool

Refinement of arsenic attributable health risks in rural Pakistan using population specific dietary intake values

Background: Previous risk assessment studies have often utilised generic consumption or intake values when evaluating ingestion exposure pathways. If these values do not accurately reflect the country or scenario in question, the resulting risk assessment will not provide a meaningful representation of cancer risks in that particular country/scenario. Objectives: This study sought to determine water and food intake parameters for one region in South Asia, rural Pakistan, and assess the role population specific intake parameters play in cancer risk assessment. Methods: A questionnaire was developed to collect data on sociodemographic features and 24-hour water and food consumption patterns from a rural community. The impact of dietary differences on cancer susceptibility linked to arsenic exposure was evaluated by calculating cancer risks using the data collected in the current study against standard water and food intake levels for the USA, Europe and Asia. A probabilistic cancer risk was performed for each set of intake values of this study. Results: Average daily total water intake based on drinking direct plain water and indirect water from food and beverages was found to be 3.5 L day-1 (95% CI: 3.38, 3.57) exceeding the US Environmental Protection Agency’s default (2.5 L day-1) and World Health Organization’s recommended intake value (2 L day-1). Average daily rice intake (469 g day-1) was found to be lower than in India and Bangladesh whereas wheat intake (402 g day−1) was higher than intake reported for USA, Europe and Asian sub-regions. Consequently, arsenic-associated cumulative cancer risks determined for daily water intake was found to be 17 in children of 3-6 years (95% CI: 0.0014, 0.0017), 14 in children of age 6-16 years (95% CI: 0.001, 0.0011) and 6 in adults of 16-67 years (95% CI: 0.0006, 0.0006) in a population size of 10000. This is higher than the risks estimated using the US Environmental Protection Agency and World Health Organization’s default recommended water intake levels. Rice intake data showed early life cumulative cancer risks of 15 in 10000 for children of 3-6 years (95% CI: 0.0012, 0.0015), 14 in children of 6-16 years (95% CI: 0.0011, 0.0014) and later life risk of 8 in adults (95% CI: 0.0008, 0.0008) in a population of 10000. This is lower than cancer risks in countries with higher rice intake and elevated arsenic levels (Bangladesh and India). Cumulative cancer risk from arsenic exposure showed the relative risk contribution from total water to be51%, from rice to be44% and wheat intake 5%. Conclusions: The study demonstrates the need to use population specific dietary information for risk assessment and risk management studies. Probabilistic risk assessment concluded the importance of dietary intake in estimating cancer risk, along with arsenic concentrations in water or food and age of exposed rural population

Paedophiles in the community: inter-agency conflict, news leaks and the local press

This article explores the leaking of confidential information about secret Home Office plans to house convicted paedophiles within a local community (albeit inside a prison). It argues that a politics of paedophilia has emerged in which inter-agency consensus on the issue of ‘what to do’ with high-profile sex offenders has broken down. Accordingly, the article situates newspaper ‘outing’ of paedophiles in the community in relation to vigilante journalism and leaked information from official agencies. The article then presents research findings from a case study of news events set in train following a whistle-blowing reaction by Prison Officers’ Association officials to Home Office plans. Drawing from a corpus of 10 interviews with journalists and key protagonists in the story, the article discusses both the dynamics of whistle blowing about paedophiles and also what happens after the whistle has blown

Percutaneous coronary intervention in the elderly: changes in case-mix and periprocedural outcomes in 31758 patients treated between 2000 and 2007

&lt;p&gt;Background: The elderly account for an increasing proportion of the population and have a high prevalence of coronary heart disease. Percutaneous coronary intervention (PCI) is the most common method of revascularization in the elderly. We examined whether the risk of periprocedural complications after PCI was higher among elderly (age ≥75 years) patients and whether it has changed over time.&lt;/p&gt; &lt;p&gt;Methods and Results: The Scottish Coronary Revascularization Register was used to undertake a retrospective cohort study on all 31 758 patients undergoing nonemergency PCI in Scotland between April 2000 and March 2007, inclusive. There was an increase in the number and percentage of PCIs undertaken in elderly patients, from 196 (8.7%) in 2000 to 752 (13.9%) in 2007. Compared with younger patients, the elderly were more likely to have multivessel disease, multiple comorbidity, and a history of myocardial infarction or coronary artery bypass grafting (χ2 tests, all P&#60;0.001). The elderly had a higher risk of major adverse cardiovascular events within 30 days of PCI (4.5% versus 2.7%, χ2 test P&#60;0.001). Over the 7 years, there was a significant increase in the proportion of elderly patients who had multiple comorbidity (χ2 test for trend, P&#60;0.001). Despite this, the underlying risk of complications did not change significantly over time either among the elderly (χ2 test for trend, P=0.142) or overall (χ2 test for trend, P=0.083).&lt;/p&gt; &lt;p&gt;Conclusions: Elderly patients have a higher risk of periprocedural complications and account for an increasing proportion of PCIs. Despite this, the risk of complications after PCI has not increased over time.&lt;/p&gt

Understanding the mobilisation of metal pollution associated with historical mining in a carboniferous upland catchment

Point and diffuse pollution from metal mining has led to severe environmental damage worldwide. Mine drainage is a significant problem for riverine ecosystems, it is commonly acidic (AMD), but neutral mine drainage (NMD) can also occur. A representative environment for studying metal pollution from NMD is provided by Carboniferous catchments characterised by a circumneutral pH and high concentrations of carbonates, supporting the formation of secondary metal-minerals as potential sinks of metals. The present study focuses on understanding the mobility of metal pollution associated with historical mining in a Carboniferous upland catchment. In the uplands of the UK, river water, sediments and spoil wastes were collected over a period of fourteen months, samples were chemically analysed to identify the main metal sources and their relationships with geological and hydrological factors. Correlation tests and principal component analysis suggest that the underlying limestone bedrock controls pH and weathering reactions. Significant metal concentrations from mining activities were measured for zinc (4.3mg/l), and lead (0.3 mg/l), attributed to processes such as oxidation of mined ores (e.g. sphalerite, galena) or dissolution of precipitated secondary metal-minerals (e.g. cerussite, smithsonite). Zinc and lead mobility indicated strong dependence on biogeochemistry and hydrological conditions (e.g. pH and flow) at specific locations in the catchment. Annual loads of zinc and lead (2.9 and 0.2 tonnes/year) demonstrate a significant source of both metals to downstream river reaches. Metal pollution results in a large area of catchment having a depleted chemical status with likely effects on the aquatic ecology. This study provides an improved understanding of geological and hydrological processes controlling water chemistry, which is critical to assessing metal sources and mobilization, especially in neutral mine drainage areas

Uma sonda de calor transiente controlada por computador para medir fluxo de fluido em meios porosos.

Uma sonda de calor transiente controlada por computador foi desenvolvida para medir fluxo em meios porosos. O sistema e operado automaticamente com o auxilio de uma placa de computador e basicamente composto de um sensor do tipo sonda-termistor, uma fonte de corrente eletrica constante de dois niveis, um conversor de sinal analogicos para digital, um transistor de efeito de campo e um conjunto de amplificadores operacionais. A sonda e alternadamente comutada entre dois modulos de operacao, alta e baixa potencia. Um programa foi desenvolvido para solicitar ao usuario os tempos para controlar o termistor e permitir os registros de identificacao do local, data, horario e dados para posicoes especificas da memoria. Os principios, a concepcao, a montagem e o funcionamento de toda a instrumentacao sao descritos. O sistema foi testado e avaliado em dois diferentes meios porosos. Resultados indicaram que o termistor aquecido e capaz de detectar o fluxo de fluido uma vez que sua resposta termica transiente foi afetada pela taxa de fluxo local