2,055 research outputs found

    Real-Time Measurements of Engine-Out Trace Elements: Application of a Novel Soot Particle Aerosol Mass Spectrometer for Emissions Characterization

    Get PDF
    Lubricant-derived trace element emissions are the largest contributors to the accumulation of incombustible ash in diesel particulate filters (DPF), eventually leading to filter plugging and an increase in engine fuel consumption. Particulate trace element emissions also pose adverse health effects and are the focus of increasingly stringent air quality regulations. To date, the rates and physical and chemical properties of lubricant-derived additive emissions are not well characterized, largely due to the difficulties associated with conducting the measurements. This work investigated the potential for conducting real-time measurements of lubricant-derived particle emissions. The experiment used the Soot Particle Aerosol Mass Spectrometer (SP-AMS) developed by Aerodyne Research to measure the size, mass and composition of submicron particles in the exhaust. Results confirm the ability of the SP-AMS to measure engine-out emissions of calcium, zinc, magnesium, phosphorous, and sulfur. Further, emissions of previously difficult to detect elements, such as boron, and low-level engine wear metals, such as lead, were also measured. This paper provides an overview of the results obtained with the SP-AMS, and demonstrates the utility of applying real-time techniques to engine-out and tailpipe-out trace element emissions. Application of the SP-AMS for engine exhaust characterization followed a two-part approach: (1) measurement validation, and (2) measurement of engine-out exhaust. Measurement validation utilized a diesel burner with precise control of lubricant consumption. Results showed a good correlation between CJ-4 oil consumption and measured levels of lubricant-derived trace elements in the particle phase. Following measurement validation, the SP-AMS measured engine-out emissions from a medium-duty diesel engine, operated over a standard speed/load matrix. This work demonstrates the utility of state-of-the-art online techniques (such as the SP-AMS) to measure engine-out emissions, including trace species derived from lubricant additives. Results help optimize the combined engine-lubricant-aftertreatment system and provide a real-time characterization of emissions. As regulations become more stringent and emission controls more complex, advanced measurement techniques with high sensitivity and fast time response will become an increasingly important part of engine characterization studies.United States. Environmental Protection Agency (Grant RD834560

    The Structure, Dynamics and Electronic Structure of Liquid Ag-Se Alloys Investigated by Ab Initio Simulation

    Full text link
    Ab initio molecular-dynamics simulations have been used to investigate the structure, dynamics and electronic properties of the liquid alloy Ag(1-x)Se(x) at 1350 K and at the three compositions x=0.33, 0.42 and 0.65. The calculations are based on density-functional theory in the local density approximation and on the pseudopotential plane-wave method. The reliability of the simulations is confirmed by detailed comparisons with very recent neutron diffraction results for the partial structure factors and radial distribution functions (RDF) of the stoichiometric liquid Ag2Se. The simulations show a dramatic change of the Se-Se RDF with increasing Se content. This change is due to the formation of Se clusters bound by covalent bonds, the Se-Se bond length being almost the same as in pure c-Se and l-Se. The clusters are predominantly chain-like, but for higher x a large fraction of 3-fold coordinated Se atoms is also found. It is shown that the equilibrium fractions of Se present as isolated atoms and in clusters can be understood on a simple charge-balance model based on an ionic interpretation. The Ag and Se diffusion coefficients both increase with Se content, in spite of the Se clustering. An analysis of the Se-Se bond dynamics reveals surprisingly short bond lifetimes of less than 1 ps. The changes in the density of states with composition arise directly from the formation of Se-Se covalent bonds. Results for the electronic conductivity obtained using the Kubo-Greenwood approximation are in adequate agreement with experiment for l-Ag2Se, but not for the high Se contents. Possible reasons for this are discussed.Comment: 14 pages, Revtex, 14 Postscript figures embedded in the tex

    Second Generation Leptoquark Search in p\bar{p} Collisions at s\sqrt{s} = 1.8 TeV

    Full text link
    We report on a search for second generation leptoquarks with the D\O\ detector at the Fermilab Tevatron ppˉp\bar{p} collider at s\sqrt{s} = 1.8 TeV. This search is based on 12.7 pb1^{-1} of data. Second generation leptoquarks are assumed to be produced in pairs and to decay into a muon and quark with branching ratio β\beta or to neutrino and quark with branching ratio (1β)(1-\beta). We obtain cross section times branching ratio limits as a function of leptoquark mass and set a lower limit on the leptoquark mass of 111 GeV/c2^{2} for β=1\beta = 1 and 89 GeV/c2^{2} for β=0.5\beta = 0.5 at the 95%\ confidence level.Comment: 18 pages, FERMILAB-PUB-95/185-

    Limits on Anomalous WWgamma and WWZ Couplings

    Get PDF
    Limits on the anomalous WWgamma and WWZ couplings are presented from a simultaneous fit to the data samples of three gauge boson pair final states in pbar-p collisions at sqrt(s)=1.8 TeV: Wgamma production with the W boson decaying to enu or munu, W boson pair production with both of the W bosons decaying to enu or munu, and WW or WZ production with one W boson decaying to enu and the other W boson or the Z boson decaying to two jets. Assuming identical WWgamma and WWZ couplings, 95 % C.L. limits on the anomalous couplings of -0.30<Delta kappa<0.43 (lambda = 0) and -0.20<lambda<0.20 (Delta kappa = 0) are obtained using a form factor scale Lambda = 2.0 TeV. Limits found under other assumptions on the relationship between the WWgamma and WWZ couplings are also presented.Comment: 13 pages, 3 figures, submitted to Physical Review

    Resection of the liver for colorectal carcinoma metastases - A multi-institutional study of long-term survivors

    Get PDF
    In this review of a collected series of patients undergoing hepatic resection for colorectal metastases, 100 patients were found to have survived greater than five years from the time of resection. Of these 100 long-term survivors, 71 remain disease-free through the last follow-up, 19 recurred prior to five years, and ten recurred after five years. Patient characteristics that may have contributed to survival were examined. Procedures performed included five trisegmentectomies, 32 lobectomies, 16 left lateral segmentectomies, and 45 wedge resections. The margin of resection was recorded in 27 patients, one of whom had a positive margin, nine of whom had a less than or equal to 1-cm margin, and 17 of whom had a greater than 1-cm margin. Eighty-one patients had a solitary metastasis to the liver, 11 patients had two metastases, one patient had three metastases, and four patients had four metastases. Thirty patients had Stage C primary carcinoma, 40 had Stage B primary carcinoma, and one had Stage A primarycarcinoma. The disease-free interval from the time of colon resection to the time of liver resection was less than one year in 65 patients, and greater than one year in 34 patients. Three patients had bilobar metastases. Four of the patients had extrahepatic disease resected simultaneously with the liver resection. Though several contraindications to hepatic resection have been proposed in the past, five-year survival has been found in patients with extrahepatic disease resected simultaneously, patients with bilobar metastases, patients with multiple metastases, and patients with positive margins. Five-year disease-free survivors are also present in each of these subsets. It is concluded that five-year survival is possible in the presence of reported contraindications to resection, and therefore that the decision to resect the liver must be individualized. © 1988 American Society of Colon and Rectal Surgeons

    Precise measurement of the top quark mass in the dilepton channel at D0

    Get PDF
    We measure the top quark mass (mt) in ppbar collisions at a center of mass energy of 1.96 TeV using dilepton ttbar->W+bW-bbar->l+nubl-nubarbbar events, where l denotes an electron, a muon, or a tau that decays leptonically. The data correspond to an integrated luminosity of 5.4 fb-1 collected with the D0 detector at the Fermilab Tevatron Collider. We obtain mt = 174.0 +- 1.8(stat) +- 2.4(syst) GeV, which is in agreement with the current world average mt = 173.3 +- 1.1 GeV. This is currently the most precise measurement of mt in the dilepton channel.Comment: 7 pages, 4 figure

    Measurement of the WW Boson Mass

    Full text link
    A measurement of the mass of the WW boson is presented based on a sample of 5982 WeνW \rightarrow e \nu decays observed in ppp\overline{p} collisions at s\sqrt{s} = 1.8~TeV with the D\O\ detector during the 1992--1993 run. From a fit to the transverse mass spectrum, combined with measurements of the ZZ boson mass, the WW boson mass is measured to be MW=80.350±0.140(stat.)±0.165(syst.)±0.160(scale)GeV/c2M_W = 80.350 \pm 0.140 (stat.) \pm 0.165 (syst.) \pm 0.160 (scale) GeV/c^2.Comment: 12 pages, LaTex, style Revtex, including 3 postscript figures (submitted to PRL
    corecore