Marine Debris Survey Manual

Over the last several years, concern has increased about the amount of man-made materials lost or discarded at sea and the potential impacts to the environment. The scope of the problem depends on the amounts and types of debris. One problem in making a regional comparison of debris is the lack of a standard methodology. The objective of this manual is to discuss designs and methodologies for assessment studies of marine debris. This manual has been written for managers, researchers, and others who are just entering this area of study and who seek guidance in designing marine debris surveys. Active researchers will be able to use this manual along with applicable references herein as a source for design improvement. To this end, the authors have synthesized their work and reviewed survey techniques that have been used in the past for assessing marine debris, such as sighting surveys, beach surveys, and trawl surveys, and have considered new methods (e.g., aerial photography). All techniques have been put into a general survey planning framework to assist in developing different marine debris surveys. (PDF file contains 100 pages.

Determination of the Joint Confidence Region of Optimal Operating Conditions in Robust Design by Bootstrap Technique

Robust design has been widely recognized as a leading method in reducing variability and improving quality. Most of the engineering statistics literature mainly focuses on finding "point estimates" of the optimum operating conditions for robust design. Various procedures for calculating point estimates of the optimum operating conditions are considered. Although this point estimation procedure is important for continuous quality improvement, the immediate question is "how accurate are these optimum operating conditions?" The answer for this is to consider interval estimation for a single variable or joint confidence regions for multiple variables. In this paper, with the help of the bootstrap technique, we develop procedures for obtaining joint "confidence regions" for the optimum operating conditions. Two different procedures using Bonferroni and multivariate normal approximation are introduced. The proposed methods are illustrated and substantiated using a numerical example.Comment: Two tables, Three figure

Economics as a conceptual resource for the study of public management

Four related bodies of knowledge inform the study and practice of public management. Broadest in scope is knowledge about the political processes that place demands, provide opportunities, and impose constraints on public managers. Next broadest in scope is policy analysis, which provides the conceptual foundations and craft skills for determining what government should do and how it should be done. Organizational design, a subset of policy analysis, gives insight into how the public sector can be organized to facilitate the effective delivery of goods and services. Narrowest in scope, but most directly relevant to the practice of management, is knowledge about how to carry out executive functions skillfully within existing organizational designs. We take the latter two bodies of knowledge, organizational design and executive function, as the core of the craft and science of public management. In this essay we consider what the discipline of economics offers for research on the core of public management

Efficiency in nanostructured thermionic and thermoelectric devices

Advances in solid-state device design now allow the spectrum of transmitted electrons in thermionic and thermoelectric devices to be engineered in ways that were not previously possible. Here we show that the shape of the electron energy spectrum in these devices has a significant impact on their performance. We distinguish between traditional thermionic devices where electron momentum is filtered in the direction of transport only and a second type, in which the electron filtering occurs according to total electron momentum. Such 'total momentum filtered' kr thermionic devices could potentially be implemented in, for example, quantum dot superlattices. It is shown that whilst total momentum filtered thermionic devices may achieve efficiency equal to the Carnot value, traditional thermionic devices are limited to efficiency below this. Our second main result is that the electronic efficiency of a device is not only improved by reducing the width of the transmission filter as has previously been shown, but also strongly depends on whether the transmission probability rises sharply from zero to full transmission. The benefit of increasing efficiency through a sharply rising transmission probability is that it can be achieved without sacrificing device power, in contrast to the use of a narrow transmission filter which can greatly reduce power. We show that devices which have a sharply-rising transmission probability significantly outperform those which do not and it is shown such transmission probabilities may be achieved with practical single and multibarrier devices. Finally, we comment on the implications of the effect the shape of the electron energy spectrum on the efficiency of thermoelectric devices.Comment: 11 pages, 15 figure

A systematic review of thrust manipulation for non-surgical shoulder conditions

PURPOSE: Although many conservative management options are available for patients with non-surgical shoulder conditions, there is little evidence of their effectiveness. This review investigated one manual therapy approach, thrust manipulation, as a treatment option. METHODS: A systematic search was conducted of the electronic databases from inception to March 2016: PubMed, PEDro, ICL, CINAHL, and AMED. Two independent reviewers conducted the screening process to determine article eligibility. Inclusion criteria were manuscripts published in peer-reviewed journals with human participants of any age. The intervention included was thrust, or high-velocity low-amplitude, manipulative therapy directed to the shoulder and/or the regions of the cervical or thoracic spine. Studies investigating secondary shoulder pain or lacking diagnostic confirmation procedures were excluded. Methodological quality was assessed using the PEDro scale and the Cochrane risk-of-bias tool. RESULTS: The initial search rendered 5041 articles. After screening titles and abstracts, 36 articles remained for full-text review. Six articles studying subacromial impingement syndrome met inclusion criteria. Four studies were randomized controlled trials (RCTs) and 2 were uncontrolled clinical studies. Five studies included 1 application of a thoracic spine thrust manipulation and 1 applied 8 treatments incorporating a shoulder joint thrust manipulation. Statistically significant improvements in pain scores were reported in all studies. Three of 4 RCTs compared a thrust manipulation to a sham, and statistical significance in pain reduction was found within the groups but not between them. Clinically meaningful changes in pain were inconsistent; 3 studies reported that scores met minimum clinically important difference, 1 reported scores did not, and 2 were unclear. Four studies found statistically significant improvements in disability; however, 2 were RCTs and did not find statistical significance between the active and sham groups. CONCLUSIONS: No clinical trials of thrust manipulation for non-surgical shoulder conditions other than subacromial impingement syndrome were found. There is limited evidence to support or refute thrust manipulation as a solitary treatment for this condition. Studies consistently reported pain reduction, but active treatments were comparable to shams. High-quality studies of thrust manipulation with safety data, longer treatment periods and follow-up outcomes are needed. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1186/s12998-016-0133-8) contains supplementary material, which is available to authorized users

A finite element model updating technique for correcting global geometric errors using multiple models

Finite element model updating has been an area of active research for the past thirty years. The goal is to provide a model that is more representative of the structure. This updated model can then be used for additional analysis to evaluate the design or provide the designer with insight on how to improve the design, if necessary. Despite the extensive amount of research, no one method has emerged that can be applied to all circumstances. The diversity in methods applied can be traced to the inverse nature of the problem. Typically, the amount of information available from modal testing of a structure is limited. The finite element model of the structures can be quite large with hundreds or thousands of degrees of freedom. This leaves the analyst with little choice but to select a region of the finite element model by choosing elements or groups of elements for corrections. The selected elements are parameterized by extracting design parameters directly or by sensitivity methods. The parameter corrections are obtained using the method of least squares. This process usually results in an ill conditioned problem that can be sensitive to small variation or noise in the test data

Field-induced water electrolysis switches an oxide semiconductor from an insulator to a metal

Here we demonstrate that water-infiltrated nanoporous glass electrically switches an oxide semiconductor from an insulator to metal. We fabricated the field effect transistor structure on an oxide semiconductor, SrTiO3, using 100%-water-infiltrated nanoporous glass - amorphous 12CaO*7Al2O3 - as the gate insulator. For positive gate voltage, electron accumulation, water electrolysis and electrochemical reduction occur successively on the SrTiO3 surface at room temperature, leading to the formation of a thin (~3 nm) metal layer with an extremely high electron concentration of 10^15-10^16 cm^-2, which exhibits exotic thermoelectric behaviour.Comment: 21 pages, 12 figure

The Prediction Properties of Inverse and Reverse Regression for the Simple Linear Calibration Problem

The calibration of measurement systems is a fundamental but under-studied problem within industrial statistics. The origins of this problem go back to basic chemical analysis based on NIST standards. In today's world these issues extend to mechanical, electrical, and materials engineering. Often, these new scenarios do not provide "gold standards" such as the standard weights provided by NIST. This paper considers the classic "forward regression followed by inverse regression" approach. In this approach the initial experiment treats the "standards" as the regressor and the observed values as the response to calibrate the instrument. The analyst then must invert the resulting regression model in order to use the instrument to make actual measurements in practice. This paper compares this classical approach to "reverse regression," which treats the standards as the response and the observed measurements as the regressor in the calibration experiment. Such an approach is intuitively appealing because it avoids the need for the inverse regression. However, it also violates some of the basic regression assumptions

Genome resequencing reveals multiscale geographic structure and extensive linkage disequilibrium in the forest tree Populus trichocarpa

This is the publisher’s final pdf. The article is copyrighted by the New Phytologist Trust and published by John Wiley & Sons, Inc. It can be found at: http://onlinelibrary.wiley.com/journal/10.1111/%28ISSN%291469-8137. To the best of our knowledge, one or more authors of this paper were federal employees when contributing to this work.•Plant population genomics informs evolutionary biology, breeding, conservation and bioenergy feedstock development. For example, the detection of reliable phenotype–genotype associations and molecular signatures of selection requires a detailed knowledge about genome-wide patterns of allele frequency variation, linkage disequilibrium and recombination.\ud •We resequenced 16 genomes of the model tree Populus trichocarpa and genotyped 120 trees from 10 subpopulations using 29 213 single-nucleotide polymorphisms.\ud •Significant geographic differentiation was present at multiple spatial scales, and range-wide latitudinal allele frequency gradients were strikingly common across the genome. The decay of linkage disequilibrium with physical distance was slower than expected from previous studies in Populus, with r² dropping below 0.2 within 3–6 kb. Consistent with this, estimates of recent effective population size from linkage disequilibrium (N[subscript e] ≈ 4000–6000) were remarkably low relative to the large census sizes of P. trichocarpa stands. Fine-scale rates of recombination varied widely across the genome, but were largely predictable on the basis of DNA sequence and methylation features.\ud •Our results suggest that genetic drift has played a significant role in the recent evolutionary history of P. trichocarpa. Most importantly, the extensive linkage disequilibrium detected suggests that genome-wide association studies and genomic selection in undomesticated populations may be more feasible in Populus than previously assumed