Pickering emulsion stabilized by cashew gum- poly-l-lactide copolymer nanoparticles: Synthesis, characterization and amphotericin B encapsulation

In this work, we provide proof-of-concept of formation, physical characteristics and potential use as a drug delivery formulation of Pickering emulsions (PE) obtained by a novel method that combines nanoprecipitation with subsequent spontaneous emulsification process. To this end, pre-formed ultra-small (d.∼10 nm) nanoprecipitated nanoparticles of hydrophobic derivatives of cashew tree gum grafted with polylactide (CGPLAP), were conceived to stabilize Pickering emulsions obtained by spontaneous emulsification. These were also loaded with Amphotericin B (AmB), a drug of low oral bioavailability used in the therapy of neglected diseases such as leishmaniasis. The graft reaction was performed in two CG/PLA molar ratio conditions (1:1 and 1:10). Emulsions were prepared by adding the organic phase (Miglyol 812®) in the aqueous phase (nanoprecipitated CGPLAP), resulting the immediate emulsion formation. The isolation by centrifugation does not destabilize or separate the nanoparticles from oil droplets of the PE emulsion. Emulsions with CGPLAP 1:1 presented unimodal distributions at different CGPLA concentration, lower values in size and PDI and the best stability over time. The AmB was incorporated in the emulsions with a process efficiency of 21-47%, as determined by UV-vis. AmB in CGPLAP emulsions is in less aggregated state than observed in commercial AmB formulation

Observation of two new Ξb−\Xi_b^- baryon resonances

Two structures are observed close to the kinematic threshold in the $\Xi_b^0 \pi^-$ mass spectrum in a sample of proton-proton collision data, corresponding to an integrated luminosity of 3.0 fb$^{-1}$ recorded by the LHCb experiment. In the quark model, two baryonic resonances with quark content $bds$ are expected in this mass region: the spin-parity $J^P = \frac{1}{2}^+$ and $J^P=\frac{3}{2}^+$ states, denoted $\Xi_b^{\prime -}$ and $\Xi_b^{*-}$. Interpreting the structures as these resonances, we measure the mass differences and the width of the heavier state to be $m(\Xi_b^{\prime -}) - m(\Xi_b^0) - m(\pi^{-}) = 3.653 \pm 0.018 \pm 0.006$ MeV$/c^2$, $m(\Xi_b^{*-}) - m(\Xi_b^0) - m(\pi^{-}) = 23.96 \pm 0.12 \pm 0.06$ MeV$/c^2$, $\Gamma(\Xi_b^{*-}) = 1.65 \pm 0.31 \pm 0.10$ MeV, where the first and second uncertainties are statistical and systematic, respectively. The width of the lighter state is consistent with zero, and we place an upper limit of $\Gamma(\Xi_b^{\prime -}) < 0.08$ MeV at 95% confidence level. Relative production rates of these states are also reported.Comment: 17 pages, 2 figure

Precision measurement of CPCP violation in Bs0→J/ψK+K−B_s^0 \to J/\psi K^+K^- decays

The time-dependent $CP$ asymmetry in $B_s^0 \to J/\psi K^+K^-$ decays is measured using $pp$ collision data, corresponding to an integrated luminosity of $3.0$fb$^{-1}$, collected with the LHCb detector at centre-of-mass energies of $7$ and $8$TeV. In a sample of 96 000 $B_s^0 \to J/\psi K^+K^-$ decays, the $CP$-violating phase $\phi_s$ is measured, as well as the decay widths $\Gamma_{L}$ and $\Gamma_{H}$ of the light and heavy mass eigenstates of the $B_s^0-\bar{B}_s^0$ system. The values obtained are $\phi_s = -0.058 \pm 0.049 \pm 0.006$ rad, $\Gamma_s \equiv (\Gamma_{L}+\Gamma_{H})/2 = 0.6603 \pm 0.0027 \pm 0.0015$ps$^{-1}$, and$\Delta\Gamma_s \equiv \Gamma_{L} - \Gamma_{H} = 0.0805 \pm 0.0091 \pm 0.0032$ps$^{-1}$, where the first uncertainty is statistical and the second systematic. These are the most precise single measurements of those quantities to date. A combined analysis with $B_s^{0} \to J/\psi \pi^+\pi^-$ decays gives $\phi_s = -0.010 \pm 0.039$rad. All measurements are in agreement with the Standard Model predictions. For the first time the phase $\phi_s$ is measured independently for each polarisation state of the $K^+K^-$ system and shows no evidence for polarisation dependence.Comment: 6 figure

Approaches in biotechnological applications of natural polymers

Natural polymers, such as gums and mucilage, are biocompatible, cheap, easily available and non-toxic materials of native origin. These polymers are increasingly preferred over synthetic materials for industrial applications due to their intrinsic properties, as well as they are considered alternative sources of raw materials since they present characteristics of sustainability, biodegradability and biosafety. As definition, gums and mucilages are polysaccharides or complex carbohydrates consisting of one or more monosaccharides or their derivatives linked in bewildering variety of linkages and structures. Natural gums are considered polysaccharides naturally occurring in varieties of plant seeds and exudates, tree or shrub exudates, seaweed extracts, fungi, bacteria, and animal sources. Water-soluble gums, also known as hydrocolloids, are considered exudates and are pathological products; therefore, they do not form a part of cell wall. On the other hand, mucilages are part of cell and physiological products. It is important to highlight that gums represent the largest amounts of polymer materials derived from plants. Gums have enormously large and broad applications in both food and non-food industries, being commonly used as thickening, binding, emulsifying, suspending, stabilizing agents and matrices for drug release in pharmaceutical and cosmetic industries. In the food industry, their gelling properties and the ability to mold edible films and coatings are extensively studied. The use of gums depends on the intrinsic properties that they provide, often at costs below those of synthetic polymers. For upgrading the value of gums, they are being processed into various forms, including the most recent nanomaterials, for various biotechnological applications. Thus, the main natural polymers including galactomannans, cellulose, chitin, agar, carrageenan, alginate, cashew gum, pectin and starch, in addition to the current researches about them are reviewed in this article.. }To the Conselho Nacional de Desenvolvimento Cientfíico e Tecnológico (CNPq) for fellowships (LCBBC and MGCC) and the Coordenação de Aperfeiçoamento de Pessoal de Nvíel Superior (CAPES) (PBSA). This study was supported by the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding of UID/BIO/04469/2013 unit, the Project RECI/BBB-EBI/0179/2012 (FCOMP-01-0124-FEDER-027462) and COMPETE 2020 (POCI-01-0145-FEDER-006684) (JAT)

Measurement of the Z+b-jet cross-section in pp collisions at √s = 7 TeV in the forward region

The associated production of a Z boson or an off-shell photon γ ∗ with a bottom quark in the forward region is studied using proton-proton collisions at a centre-of-mass energy of 7 TeV. The Z bosons are reconstructed in the Z/γ∗ → µ +µ − final state from muons with a transverse momentum larger than 20 GeV, while two transverse momentum thresholds are considered for jets (10 GeV and 20 GeV). Both muons and jets are reconstructed in the pseudorapidity range 2.0 &#60; η &#60; 4.5. The results are based on data corresponding to 1.0 fb−1 recorded in 2011 with the LHCb detector. The measurement of the Z+b-jet cross-section is normalized to the Z+jet cross-section. The measured cross-sections are σ(Z/γ∗ (µ +µ −) + b-jet) = 295 ± 60 (stat) ± 51 (syst) ± 10 (lumi) fb (0.1) for pT(jet) &#62; 10 GeV, and σ(Z/γ∗ (µ +µ −) + b-jet) = 128 ± 36 (stat) ± 22 (syst) ± 5 (lumi) fb (0.2) for pT(jet) &#62; 20 GeV

Measurement of indirect CP asymmetries in D 0 → K − K + and D 0 → π − π + decays using semileptonic B decays

No abstract available

Study of η − η′ mixing from measurement of B (s) 0 → J/ψη(′) decay rates

A study of B and B0 s meson decays into J/ψη and J/ψη0 final states is performed using a data set of proton-proton collisions at centre-of-mass energies of 7 and 8 TeV, collected by the LCHb experiment and corresponding to 3.0 fb−1 of integrated luminosity. The decay B0 → J/ψη0 is observed for the first time. The following ratios of branching fractions are measured: B(B0 → J/ψη0 ) B(B0 s → J/ψη0) = (2.28 ± 0.65 (stat) ± 0.10 (syst) ± 0.13 (fs/fd)) × 10−2 , B(B0 → J/ψη) B(B0 s → J/ψη) = (1.85 ± 0.61 (stat) ± 0.09 (syst) ± 0.11 (fs/fd)) × 10−2 , where the third uncertainty is related to the present knowledge of fs/fd, the ratio between the probabilities for a b quark to form a B0 s or a B0 meson. The branching fraction ratios are used to determine the parameters of η−η 0 meson mixing. In addition, the first evidence for the decay B0 s → ψ(2S)η 0 is reported, and the relative branching fraction is measured, B(B0 s → ψ(2S)η 0 ) B(B0 s → J/ψη0) = (38.7 ± 9.0 (stat) ± 1.3 (syst) ± 0.9(B)) × 10−2 , where the third uncertainty is due to the limited knowledge of the branching fractions of J/ψ and ψ(2S) mesons

Angular analysis of the B-0 -> K*(0) e(+) e(-) decay in the low-q(2) region

An angular analysis of the B-0 -&gt; K(*0)e(+) e(-) decay is performed using a data sample, corresponding to an integrated luminosity of 3.0 fb(-1), collected by the LHCb experiment in pp collisions at centre-of-mass energies of 7 and 8TeV during 2011 and 2012. For the first time several observables are measured in the dielectron mass squared (q(2)) interval between 0.002 and 1.120 GeV2/c(4). The angular observables F-L and A(T)(Re) which are related to the K-*0 polarisation and to the lepton forward-backward asymmetry, are measured to be F-L = 0.16 +/- 0.06 +/- 0.03 and A(T)(Re) = 0.10 +/- 0.18 +/- 0.05, where the first uncertainty is statistical and the second systematic. The angular observables A(T)((2)) and A(T)(Im) which are sensitive to the photon polarisation in this q(2) range, are found to be A(T)((2)) = - 0.23 +/- 0.23 +/- 0.05 and A(T)(Im) = 0.14 +/- 0.22 +/- 0.05. The results are consistent with Standard Model predictions