Surface profilometer for examining grain-boundary grooves

Surface profilometer, consisting primarily of commercially available components, measures surface topographical features accurately and precisely. It shows improvement over the interferometric technique in measurement of grain-boundary grooves formed during annealing on nickel-oxide bicrystals

Epidemiology of visceral leishmaniasis.

Leishmania species are the causative agents of leishmaniasis, a neglected tropical disease. These parasitic protozoans are usually transmitted between vertebrate hosts by the bite of blood sucking female phlebotomine sand flies. This review focuses on the two parasites causing most human visceral leishmaniasis (VL), which leads to substantial health problems or death for up to 400,000 people per year. Except for travel cases, Leishmania donovani infections are restricted to the (sub-)tropics of Asia and Africa, where transmission is mostly anthroponotic, while Leishmania infantum occurs in the drier parts of Latin America as well as in the Mediterranean climate regions of the Old World, with the domestic dog serving as the main reservoir host. The prevalence of VL caused by L. infantum has been declining where living standards have improved. In contrast, infections of L. donovani continue to cause VL epidemics in rural areas on the Indian subcontinent and in East Africa. The current review compares and contrasts these continental differences and suggests priorities for basic and applied research that might improve VL control. Transmission cycles, pathogenesis, diagnosis, treatment and prognosis, prevention (including vector control), surveillance, transmission modeling, and international control efforts are all reviewed. Most case detection is passive, and so routine surveillance does not usually permit accurate assessments of any changes in the incidence of VL. Also, it is not usually possible to estimate the human inoculation rate of parasites by the sand fly vectors because of the limitations of survey methods. Consequently, transmission modeling rarely passes beyond the proof of principle stage, and yet it is required to help develop risk factor analysis for control programs. Anthroponotic VL should be susceptible to elimination by rapid case detection and treatment combined with local vector control, and one of the most important interventions may well be socioeconomic development

Species-specific ecological niche modelling predicts different range contractions for Lutzomyia intermedia and a related vector of Leishmania braziliensis following climate change in South America

BACKGROUND: Before 1996 the phlebotomine sand fly Lutzomyia neivai was usually treated as a synonym of the morphologically similar Lutzomyia intermedia, which has long been considered a vector of Leishmania braziliensis, the causative agent of much cutaneous leishmaniasis in South America. This report investigates the likely range changes of both sand fly species in response to a stabilisation climate change scenario (RCP4.5) and a high greenhouse gas emissions one (RCP8.5). METHODS: Ecological niche modelling was used to identify areas of South America with climates currently suitable for each species, and then the future distributions of these climates were predicted based on climate change scenarios. Compared with the previous ecological niche model of L. intermedia (sensu lato) produced using the GARP algorithm in 2003, the current investigation modelled the two species separately, making use of verified presence records and additional records after 2001. Also, the new ensemble approach employed ecological niche modelling algorithms (including Maximum Entropy, Random Forests and Support Vector Machines) that have been widely adopted since 2003 and perform better than GARP, as well as using a more recent climate change model (HadGEM2) considered to have better performance at higher resolution than the earlier one (HadCM2). RESULTS: Lutzomyia intermedia was shown to be the more tropical of the two species, with its climatic niche defined by higher annual mean temperatures and lower temperature seasonality, in contrast to the more subtropical L. neivai. These different latitudinal ranges explain the two species' predicted responses to climate change by 2050, with L. intermedia mostly contracting its range (except perhaps in northeast Brazil) and L. neivai mostly shifting its range southwards in Brazil and Argentina. This contradicts the findings of the 2003 report, which predicted more range expansion. The different findings can be explained by the improved data sets and modelling methods. CONCLUSIONS: Our findings indicate that climate change will not always lead to range expansion of disease vectors such as sand flies. Ecological niche models should be species specific, carefully selected and combined in an ensemble approach

Predicting the distribution of canine leishmaniasis in western Europe based on environmental variables.

The domestic dog is the reservoir host of Leishmania infantum, the causative agent of zoonotic visceral leishmaniasis endemic in Mediterranean Europe. Targeted control requires predictive risk maps of canine leishmaniasis (CanL), which are now explored. We databased 2187 published and unpublished surveys of CanL in southern Europe. A total of 947 western surveys met inclusion criteria for analysis, including serological identification of infection (504, 369 dogs tested 1971-2006). Seroprevalence was 23 2% overall (median 10%). Logistic regression models within a GIS framework identified the main environmental predictors of CanL seroprevalence in Portugal, Spain, France and Italy, or in France alone. A 10-fold cross-validation approach determined model capacity to predict point-values of seroprevalence and the correct seroprevalence class (20%). Both the four-country and France-only models performed reasonably well for predicting correctly the 20% seroprevalence classes (AUC >0 70). However, the France-only model performed much better for France than the four-country model. The four-country model adequately predicted regions of CanL emergence in northern Italy (<5% seroprevalence). Both models poorly predicted intermediate point seroprevalences (5-20%) within regional foci, because surveys were biased towards known rural foci and Mediterranean bioclimates. Our recommendations for standardizing surveys would permit higher-resolution risk mapping

Process mapping of laser surface modification of AISI 316L stainless steel for biomedical applications

A 1.5-kW CO2 laser in pulsed mode at 3 kHz was used to investigate the effects of varied laser process parameters and resulting morphology of AISI 316L stainless steel. Irradiance and residence time were varied between 7.9 to 23.6 MW/cm2 and 50 to 167 µs respectively. A strong correlation between irradiance, residence time, depth of processing and roughness of processed steel was established. The high depth of altered microstructure and increased roughness were linked to higher levels of both irradiance and residence times. Energy fluence and surface temperature models were used to predict levels of melting occurring on the surface through the analysis of roughness and depth of the region processed. Microstructural images captured by the SEM revealed significant grain structure changes at higher irradiances, but due to increased residence times, limited to the laser in use, the hardness values were not improved

Avalanche of Bifurcations and Hysteresis in a Model of Cellular Differentiation

Cellular differentiation in a developping organism is studied via a discrete bistable reaction-diffusion model. A system of undifferentiated cells is allowed to receive an inductive signal emenating from its environment. Depending on the form of the nonlinear reaction kinetics, this signal can trigger a series of bifurcations in the system. Differentiation starts at the surface where the signal is received, and cells change type up to a given distance, or under other conditions, the differentiation process propagates through the whole domain. When the signal diminishes hysteresis is observed

Laser Machining by short and ultrashort pulses, state of the art and new opportunities in the age of the photons

An overview is given of the applications of short and ultrashort lasers in material processing. Shorter pulses reduce heat-affected damage of the material and opens new ways for nanometer accuracy. Even forty years after the development of the laser there is a lot of effort in developing new and better performing lasers. The driving force is higher accuracy at reasonable cost, which is realised by compact systems delivering short laser pulses of high beam quality. Another trend is the shift towards shorter wavelengths, which are better absorbed by the material and which allows smaller feature sizes to be produced. Examples of new products, which became possible by this technique, are given. The trends in miniaturization as predicted by Moore and Taniguchi are expected to continue over the next decade too thanks to short and ultrashort laser machining techniques. After the age of steam and the age of electricity we have entered the age of photons now

Public Benefits of Undeveloped Lands on Urban Outskirts: Non-Market Valuation Studies and their Role in Land Use Plans

Over the past three decades, the economics profession has developed methods for estimating the public benefits of green spaces, providing an opportunity to incorporate such information into land-use planning. While federal regulations routinely require such estimates for major regulations, the extent to which they are used in local land use plans is not clear. This paper reviews the literature on public values for lands on urban outskirts, not just to survey their methods or empirical findings, but to evaluate the role they have played--or have the potential to play-- in actual land use plans. Based on interviews with authors and representatives of funding agencies and local land trusts, it appears that academic work has had a mixed reception in the policy world. Reasons for this include a lack of interest in making academic work accessible to policy makers, emphasizing revealed preference methods which are inconsistent with policy priorities related to nonuse values, and emphasis on benefit-cost analyses. Nevertheless, there are examples of success stories that illustrate how such information can play a vital role in the design of conservation policies. Working Paper 07-2

Changes in dental plaque following hospitalisation in a critical care unit: an observational study

Additional funding was provided by a grant from the Faculty of Dental Surgery, Royal College of Surgeons, England, and this work was undertaken at University College London/University College London Hospitals, which received a proportion of funding from the Department of Health’s National Institute for Health Research Biomedical Research Centres funding scheme