Lateral Load Testing of the Advanced Stirling Convertor (ASC-E2) Heater Head

Free-piston Stirling convertors are fundamental to the development of NASA s next generation of radioisotope power system, the Advanced Stirling Radioisotope Generator (ASRG). The ASRG will use General Purpose Heat Source (GPHS) modules as the energy source and Advanced Stirling Convertors (ASCs) to convert heat into electrical energy, and is being developed by Lockheed Martin under contract to the Department of Energy. Achieving flight status mandates that the ASCs satisfy design as well as flight requirements to ensure reliable operation during launch. To meet these launch requirements, GRC performed a series of quasi-static mechanical tests simulating the pressure, thermal, and external loading conditions that will be experienced by an ASC E2 heater head assembly. These mechanical tests were collectively referred to as lateral load tests since a primary external load lateral to the heater head longitudinal axis was applied in combination with the other loading conditions. The heater head was subjected to the operational pressure, axial mounting force, thermal conditions, and axial and lateral launch vehicle acceleration loadings. To permit reliable prediction of the heater head s structural performance, GRC completed Finite Element Analysis (FEA) computer modeling for the stress, strain, and deformation that will result during launch. The heater head lateral load test directly supported evaluation of the analysis and validation of the design to meet launch requirements. This paper provides an overview of each element within the test and presents assessment of the modeling as well as experimental results of this task

Development of an optimized AAV2/5 gene therapy vector for Leber congenital amaurosis owing to defects in RPE65

Leber congenital amaurosis is a group of inherited retinal dystrophies that cause severe sight impairment in childhood; RPE65-deficiency causes impaired rod photoreceptor function from birth and progressive impairment of cone photoreceptor function associated with retinal degeneration. In animal models of RPE65 deficiency, subretinal injection of recombinant adeno-associated virus (AAV) 2/2 vectors carrying RPE65 cDNA improves rod photoreceptor function, and intervention at an early stage of disease provides sustained benefit by protecting cone photoreceptors against retinal degeneration. In affected humans, administration of these vectors has resulted to date in relatively modest improvements in photoreceptor function, even when retinal degeneration is comparatively mild, and the duration of benefit is limited by progressive retinal degeneration. We conclude that the demand for RPE65 in humans is not fully met by current vectors, and predict that a more powerful vector will provide more durable benefit. With this aim we have modified the original AAV2/2 vector to generate AAV2/5-OPTIRPE65. The new configuration consists of an AAV vector serotype 5 carrying an optimized hRPE65 promoter and a codon-optimized hRPE65 gene. In mice, AAV2/5-OPTIRPE65 is at least 300-fold more potent than our original AAV2/2 vector

Assembling the puzzle of superconducting elements: A Review

Superconductivity in the simple elements is of both technological relevance and fundamental scientific interest in the investigation of superconductivity phenomena. Recent advances in the instrumentation of physics under pressure have enabled the observation of superconductivity in many elements not previously known to superconduct, and at steadily increasing temperatures. This article offers a review of the state of the art in the superconductivity of elements, highlighting underlying correlations and general trends.Comment: Review, 10 pages, 11 figures, 97 references; to appear in Superc. Sci. Techno

Phonons and related properties of extended systems from density-functional perturbation theory

This article reviews the current status of lattice-dynamical calculations in crystals, using density-functional perturbation theory, with emphasis on the plane-wave pseudo-potential method. Several specialized topics are treated, including the implementation for metals, the calculation of the response to macroscopic electric fields and their relevance to long wave-length vibrations in polar materials, the response to strain deformations, and higher-order responses. The success of this methodology is demonstrated with a number of applications existing in the literature.Comment: 52 pages, 14 figures, submitted to Review of Modern Physic

Waveforms and Sonic Boom Perception and Response (WSPR): Low-Boom Community Response Program Pilot Test Design, Execution, and Analysis

The Waveforms and Sonic boom Perception and Response (WSPR) Program was designed to test and demonstrate the applicability and effectiveness of techniques to gather data relating human subjective response to multiple low-amplitude sonic booms. It was in essence a practice session for future wider scale testing on naive communities, using a purpose built low-boom demonstrator aircraft. The low-boom community response pilot experiment was conducted in California in November 2011. The WSPR team acquired sufficient data to assess and evaluate the effectiveness of the various physical and psychological data gathering techniques and analysis methods

Someone is pulling the strings: hypersensitive agency detection and belief in conspiracy theories

We hypothesized that belief in conspiracy theories would be predicted by the general tendency to attribute agency and intentionality where it is unlikely to exist. We further hypothesized that this tendency would explain the relationship between education level and belief in conspiracy theories, where lower levels of education have been found to be associated with higher conspiracy belief. In Study 1 (N=202) participants were more likely to agree with a range of conspiracy theories if they also tended to attribute intentionality and agency to inanimate objects. As predicted, this relationship accounted for the link between education level and belief in conspiracy theories. We replicated this finding in Study 2 (N=330), whilst taking into account beliefs in paranormal phenomena. These results suggest that education may undermine the reasoning processes and assumptions that are reflected in conspiracy belief

Sexualisation's four faces: sexualisation and gender stereotyping in the Bailey Review

This paper explores the considerations of sexualisation and gender stereotyping in the recent UK government report Letting Children be Children. This report, the Bailey Review, claimed to represent the views of parents. However, closer reading reveals that, while the parents who were consulted were concerned about both the sexualisation and the gender stereotyping of products aimed at children, the Bailey Review focuses only on the former and dismisses the latter. ‘Sexualisation’ has four faces in the Bailey Review: it is treated as a process that increases (1) the visibility of sexual content in the public domain, (2) misogyny, (3) the sexuality of children, and (4) the mainstream position of ‘deviant’ sexual behaviours and lifestyles. Through this construction of ‘sexualisation’, gendered relations of power are not only hidden from view but also buttress a narrative in which young women are situated as children, and their sexuality and desire rendered pathological and morally unacceptable as judged by a conservative standard of decency. Comparison of the treatment of sexualisation and gender stereotyping in the review is revealing of the political motivations behind it, and of wider discourse in these areas

Low Energy Nuclear Reaction Aircraft- 2013 ARMD Seedling Fund Phase I Project

This report serves as the final written documentation for the Aeronautic Research Mission Directorate (ARMD) Seedling Fund's Low Energy Nuclear Reaction (LENR) Aircraft Phase I project. The findings presented include propulsion system concepts, synergistic missions, and aircraft concepts. LENR is a form of nuclear energy that potentially has over 4,000 times the energy density of chemical energy sources. It is not expected to have any harmful emissions or radiation which makes it extremely appealing. There is a lot of interest in LENR, but there are no proven theories. This report does not explore the feasibility of LENR. Instead, it assumes that a working system is available. A design space exploration shows that LENR can enable long range and high speed missions. Six propulsion concepts, six missions, and four aircraft concepts are presented. This report also includes discussion of several issues and concerns that were uncovered during the study and potential research areas to infuse LENR aircraft into NASA's aeronautics research

Uso de morteros catalíticos sobre paneles, para el análisis de la reducción de partículas contaminantes en el aire

Trabajo de Investigación TecnológicaEste proyecto de grado se enfoca en la contaminación del aire y el uso de las nuevas tecnologías en la construcción para combatir este problema que genera afectaciones no solo ambientales, sino en la salud humana, en la flora y la fauna. La nanotecnología, es una rama que se desprende de las nuevas tecnologías y que se ha abierto paso en la industria de la construcción, por medio de la implementación de materiales y aditivos te tamaño nanométrico que mejoran y generan nuevas propiedades en los materiales comunes de construcción como el acero, concretos, morteros, pinturas, etc. En este proyecto se elaboró un concreto y mortero adicionando el Dióxido de titanio (TiO2), el cual actúa como un catalizador al combinarse con el cemento y los rayos ultra violeta, y su función principal es oxidar las partículas contaminantes suspendidas en el aire, por lo cual se categoriza como un descontaminante. Adicionalmente, el TiO2 puede mejorar las propiedades del concreto. Para comprobar el efecto del TiO2 en el concreto, se elaboraron cuatro cilindros de concreto común y de concreto adicionado, los cuales se fallaron en las edades típicas de falla y se compararon los resultados obtenidos. De igual manera, se fabricó un mortero adicionado, el cual se colocó sobre paneles y se dejó expuesto ocho días en un área de monitoreo de aire, y con los datos obtenidos se realizó el análisis correspondiente.1 INTRODUCCIÓN 2 ANTECEDENTES 3 PLANTEAMIENTO DEL PROBLEMA 4 OBJETIVOS 5 JUSTIFICACIÓN 6 DELIMITACIONES 7 MARCO DE REFERENCIA 8 METODOLOGÍA 9 DISEÑO METODOLÓGICO. 10 CONCLUSIONES 11 RECOMENDACIONES BIBLIOGRAFÍAPregradoIngeniero Civi