58,430 research outputs found
Narrow 87Rb and 133Cs hyperfine transitions in evacuated wall-coated cells
An extension of work on wall-coated cells was made to include observation by a triple resonance technique of the 0-0 hyperfine transitions in 87Rb and 133Cs. Conventional RF excited lamps were used. Interest in such cells is for possible application in atomic clocks. The Rb cell would appear to remain especially promising in this respect
Optimizing radiation dose and fractionation for the definitive treatment of locally advanced non-small cell lung cancer
Recommended from our members
Multi-Material Ultrasonic Consolidation
Ultrasonic consolidation (UC) is a recently developed direct metal solid freeform
fabrication process. While the process has been well-demonstrated for part fabrication in Al alloy
3003 H18, including with intricate cooling channels, some of the potential strengths of the
process have not been fully exploited. One of them is its flexibility with build materials and the
other is its suitability for fabrication of multi-material and functionally graded material parts with
enhanced functional or mechanical properties. Capitalizing on these capabilities is critical for
broadening the application range and commercial utilization of the process. In the current work,
UC was used to investigate ultrasonic bonding of a broad range of engineering materials, which
included stainless steels, Ni-base alloys, brass, Al alloys, and Al alloy composites. UC multimaterial part fabrication was examined using Al alloy 3003 as the bulk part material and the
above mentioned materials as performance enhancement materials. Studies were focused on
microstructural aspects to evaluate interface characteristics between dissimilar material layers.
The results showed that most of these materials can be successfully bonded to Al alloy 3003 and
vice versa using the ultrasonic consolidation process. Bond formation and interface
characteristics between various material combinations are discussed based on oxide layer
characteristics, material properties, and others.Mechanical Engineerin
Some Physical Consequences of Abrupt Changes in the Multipole Moments of a Gravitating Body
The Barrab\`es-Israel theory of light-like shells in General Relativity is
used to show explicitly that in general a light-like shell is accompanied by an
impulsive gravitational wave. The gravitational wave is identified by its
Petrov Type N contribution to a Dirac delta-function term in the Weyl conformal
curvature tensor (with the delta-function singular on the null hypersurface
history of the wave and shell). An example is described in which an
asymptotically flat static vacuum Weyl space-time experiences a sudden change
across a null hypersurface in the multipole moments of its isolated axially
symmetric source. A light-like shell and an impulsive gravitational wave are
identified, both having the null hypersurface as history. The stress-energy in
the shell is dominated (at large distance from the source) by the jump in the
monopole moment (the mass) of the source with the jump in the quadrupole moment
mainly responsible for the stress being anisotropic. The gravitational wave
owes its existence principally to the jump in the quadrupole moment of the
source confirming what would be expected.Comment: 26 pages, tex, no figures, to appear in Phys.Rev.
Gas Dynamics in the Barred Seyfert Galaxy NGC4151 - II. High Resolution HI Study
We present sensitive, high angular resolution (6" x 5") 21-cm observations of
the neutral hydrogen in the nearby barred Seyfert galaxy, NGC4151. These HI
observations, obtained using the VLA in B-configuration, are the highest
resolution to date of this galaxy, and reveal hitherto unprecedented detail in
the distribution and kinematics of the HI on sub-kiloparsec scales. A complete
analysis and discussion of the HI data are presented and the global properties
of the galaxy are related to the bar dynamics presented in Paper I.Comment: 13 pages including 9 figures and 3 tables; accepted for publication
in MNRA
Call centre management: responsibilities and performance
PURPOSE - To investigate call centre management from the perspective of the managers, particularly what the key management responsibilities are in managing call centres and the key performance indicators (KPIs) used in managing call centres. DESIGN/METHODOLOGY/APPROACH - A survey of call centre managers, followed by in-depth interviews. FINDINGS - There is confusion over the strategic intent of call centres. Centres are primarily used by organisations as a means of reducing costs, with customer service delivery a secondary consideration. Call centre managers, however, declared customer service as their main management responsibility. PRACTICAL IMPLICATION - The metrics employed in the call centres resulted in managers concentrating on the call itself rather than the outcome of the call from the perspective of the customer or the organisation. Some quantitative measures were used as proxies for customer service, but the achievement of the relevant KPI became a goal in its own right. There appears to be an insatiable appetite for quantitative performance measures, despite their limitations, almost to the exclusion of all other performance measures. ORIGINALITY/VALUE - The implication of the results for call centre managers, and their managers, is that call centres could be better managed if a wider range of means and measures were used
Dynamical Localization in Quasi-Periodic Driven Systems
We investigate how the time dependence of the Hamiltonian determines the
occurrence of Dynamical Localization (DL) in driven quantum systems with two
incommensurate frequencies. If both frequencies are associated to impulsive
terms, DL is permanently destroyed. In this case, we show that the evolution is
similar to a decoherent case. On the other hand, if both frequencies are
associated to smooth driving functions, DL persists although on a time scale
longer than in the periodic case. When the driving function consists of a
series of pulses of duration , we show that the localization time
increases as as the impulsive limit, , is
approached. In the intermediate case, in which only one of the frequencies is
associated to an impulsive term in the Hamiltonian, a transition from a
localized to a delocalized dynamics takes place at a certain critical value of
the strength parameter. We provide an estimate for this critical value, based
on analytical considerations. We show how, in all cases, the frequency spectrum
of the dynamical response can be used to understand the global features of the
motion. All results are numerically checked.Comment: 7 pages, 5 figures included. In this version is that Subsection III.B
and Appendix A on the quasiperiodic Fermi Accelerator has been replaced by a
reference to published wor
Recommended from our members
An Evaluation of a Battery of Functional and Structural Tests as Predictors of Likely Risk of Progression of Age-Related Macular Degeneration.
Purpose: To evaluate the ability of visual function and structural tests to identify the likely risk of progression from early/intermediate to advanced AMD, using the Age-Related Eye Disease Study (AREDS) simplified scale as a surrogate for risk of progression. The secondary aim was to determine the relationship between disease severity grade and the observed functional and structural deficits. Methods: A total of 100 participants whose AMD status varied from early to advanced were recruited. Visual function was assessed using cone dark adaptation, 14 Hz flicker and chromatic threshold tests and retinal structure was assessed by measuring drusen volume and macular thickness. The predictive value of the tests was estimated using ordinal regression analysis. Group comparisons were assessed using analysis of covariance. Results: Change in cone dark adaptation (cone τ) and yellow-blue (YB) chromatic sensitivity were independent predictors for AMD progression risk (cone τ, pseudo R2 = 0.35, P < 0.001; YB chromatic threshold, pseudo R2 = 0.16, P < 0.001). The only structural predictor was foveal thickness (R2 = 0.05, P = 0.047). Chromatic sensitivity and cone dark adaptation were also the best functional tests at distinguishing between severity groups. Drusen characteristics clearly differentiated between participants with early and advanced disease, but were not able to differentiate between those with early AMD and controls. Mean differences in retinal thickness existed between severity groups at the foveal (P = 0.040) and inner (P = 0.001) subfields. Conclusions: This study indicates that cone τ, YB chromatic threshold and foveal thickness are independent predictors of likely risk of AMD progression
Technical Note: Could benzalkonium chloride be a suitable alternative to mercuric chloride for preservation of seawater samples?
Instrumental equipment unsuitable or unavailable for fieldwork as well as lack of ship space can necessitate the preservation of seawater samples prior to analysis in a shore-based laboratory. Mercuric chloride (HgCl2) is routinely used for such preservation, but its handling and subsequent disposal incur environmental risks and significant expense. There is therefore a strong motivation to find less hazardous alternatives. Benzalkonium chloride (BAC) has been used previously as microbial inhibitor for freshwater samples. Here, we assess the use of BAC for marine samples prior to the measurement of oxygen-to-argon (O2 / Ar) ratios, as used for the determination of biological net community production. BAC at a concentration of 50 mg dm−3 inhibited microbial activity for at least 3 days in samples tested with chlorophyll a (Chl a) concentrations up to 1 mg m−3. BAC concentrations of 100 and 200 mg dm−3 were no more effective than 50 mg dm−3 . With fewer risks to human health and the environment, and no requirement for expensive waste disposal, BAC could be a viable alternative to HgCl2 for short-term preservation of seawater samples, but is not a replacement for HgCl2 in the case of oxygen triple isotope analysis, which requires storage over weeks to months. In any event, further tests on a case-by-case basis should be undertaken if use of BAC was considered, since its inhibitory activity may depend on concentration and composition of the microbial community
- …
