Towards a formalism for mapping the spacetimes of massive compact objects: Bumpy black holes and their orbits

Observations have established that extremely compact, massive objects are common in the universe. It is generally accepted that these objects are black holes. As observations improve, it becomes possible to test this hypothesis in ever greater detail. In particular, it is or will be possible to measure the properties of orbits deep in the strong field of a black hole candidate (using x-ray timing or with gravitational-waves) and to test whether they have the characteristics of black hole orbits in general relativity. Such measurements can be used to map the spacetime of a massive compact object, testing whether the object's multipoles satisfy the strict constraints of the black hole hypothesis. Such a test requires that we compare against objects with the ``wrong'' multipole structure. In this paper, we present tools for constructing bumpy black holes: objects that are almost black holes, but that have some multipoles with the wrong value. The spacetimes which we present are good deep into the strong field of the object -- we do not use a large r expansion, except to make contact with weak field intuition. Also, our spacetimes reduce to the black hole spacetimes of general relativity when the ``bumpiness'' is set to zero. We propose bumpy black holes as the foundation for a null experiment: if black hole candidates are the black holes of general relativity, their bumpiness should be zero. By comparing orbits in a bumpy spacetime with those of an astrophysical source, observations should be able to test this hypothesis, stringently testing whether they are the black holes of general relativity. (Abridged)Comment: 16 pages + 2 appendices + 3 figures. Submitted to PR

The Middle Way: East Asian masters students’ perceptions of critical argumentation in U.K. universities.

The paper explores the learning experiences of East Asian masters students in dealing with Western academic norms of critical thinking in classroom debate and assignment writing. The research takes a cultural approach, and employs grounded theory and case study methodology, the aims being for students to explain their perceptions of their personal learning journeys. The data suggest that the majority of students interviewed rejected full academic acculturation into Western norms of argumentation. They instead opted for a ‘Middle Way’ that synergizes the traditional cultural academic values held by many East Asian students with those elements of Western academic norms that are perceived to be aligned with these. This is a relatively new area of research which represents a challenge for British lecturers and students

Researching trust in the police and trust in justice: a UK perspective

This paper describes the immediate and more distant origins of a programme of comparative research that is examining cross-national variations in public trust in justice and in the police. The programme is built around a module of the fifth European Social Survey, and evolved from a study funded by the European Commission. The paper describes the conceptual framework within which we are operating – developed in large measure from theories of procedural justice. It reviews some of the methodological issues raised by the use of sample surveys to research issues of public trust in the police, public perceptions of institutional legitimacy and compliance with the law. Finally it gives a flavour of some of the early findings emerging from the programme

Onset of Superfluidity in 4He Films Adsorbed on Disordered Substrates

We have studied 4He films adsorbed in two porous glasses, aerogel and Vycor, using high precision torsional oscillator and DC calorimetry techniques. Our investigation focused on the onset of superfluidity at low temperatures as the 4He coverage is increased. Torsional oscillator measurements of the 4He-aerogel system were used to determine the superfluid density of films with transition temperatures as low as 20 mK. Heat capacity measurements of the 4He-Vycor system probed the excitation spectrum of both non-superfluid and superfluid films for temperatures down to 10 mK. Both sets of measurements suggest that the critical coverage for the onset of superfluidity corresponds to a mobility edge in the chemical potential, so that the onset transition is the bosonic analog of a superconductor-insulator transition. The superfluid density measurements, however, are not in agreement with the scaling theory of an onset transition from a gapless, Bose glass phase to a superfluid. The heat capacity measurements show that the non-superfluid phase is better characterized as an insulator with a gap.Comment: 15 pages (RevTex), 21 figures (postscript

MTDATA and the prediction of phase equilibria in oxide systems : 30 years of industrial collaboration

This paper gives an introduction to MTDATA, Phase Equilibrium Software from the National Physical Laboratory (NPL), and describes the latest advances in the development of a comprehensive database of thermodynamic parameters to underpin calculations of phase equilibria in large oxide, sulfide, and fluoride systems of industrial interest. The database, MTOX, has been developed over a period of thirty years based upon modeling work at NPL and funded by industrial partners in a project co-ordinated by Mineral Industry Research Organisation. Applications drawn from the fields of modern copper scrap smelting, high-temperature behavior of basic oxygen steelmaking slags, flash smelting of nickel, electric furnace smelting of ilmenite, and production of pure TiO2via a low-temperature molten salt route are discussed along with calculations to assess the impact of impurities on the uncertainty of fixed points used to realize the SI unit of temperature, the kelvin

Gravitational Lensing at Millimeter Wavelengths

With today's millimeter and submillimeter instruments observers use gravitational lensing mostly as a tool to boost the sensitivity when observing distant objects. This is evident through the dominance of gravitationally lensed objects among those detected in CO rotational lines at z>1. It is also evident in the use of lensing magnification by galaxy clusters in order to reach faint submm/mm continuum sources. There are, however, a few cases where millimeter lines have been directly involved in understanding lensing configurations. Future mm/submm instruments, such as the ALMA interferometer, will have both the sensitivity and the angular resolution to allow detailed observations of gravitational lenses. The almost constant sensitivity to dust emission over the redshift range z=1-10 means that the likelihood for strong lensing of dust continuum sources is much higher than for optically selected sources. A large number of new strong lenses are therefore likely to be discovered with ALMA, allowing a direct assessment of cosmological parameters through lens statistics. Combined with an angular resolution <0.1", ALMA will also be efficient for probing the gravitational potential of galaxy clusters, where we will be able to study both the sources and the lenses themselves, free of obscuration and extinction corrections, derive rotation curves for the lenses, their orientation and, thus, greatly constrain lens models.Comment: 69 pages, Review on quasar lensing. Part of a LNP Topical Volume on "Dark matter and gravitational lensing", eds. F. Courbin, D. Minniti. To be published by Springer-Verlag 2002. Paper with full resolution figures can be found at ftp://oden.oso.chalmers.se/pub/tommy/mmviews.ps.g

An Integrated TCGA Pan-Cancer Clinical Data Resource to Drive High-Quality Survival Outcome Analytics

For a decade, The Cancer Genome Atlas (TCGA) program collected clinicopathologic annotation data along with multi-platform molecular profiles of more than 11,000 human tumors across 33 different cancer types. TCGA clinical data contain key features representing the democratized nature of the data collection process. To ensure proper use of this large clinical dataset associated with genomic features, we developed a standardized dataset named the TCGA Pan-Cancer Clinical Data Resource (TCGA-CDR), which includes four major clinical outcome endpoints. In addition to detailing major challenges and statistical limitations encountered during the effort of integrating the acquired clinical data, we present a summary that includes endpoint usage recommendations for each cancer type. These TCGA-CDR findings appear to be consistent with cancer genomics studies independent of the TCGA effort and provide opportunities for investigating cancer biology using clinical correlates at an unprecedented scale. Analysis of clinicopathologic annotations for over 11,000 cancer patients in the TCGA program leads to the generation of TCGA Clinical Data Resource, which provides recommendations of clinical outcome endpoint usage for 33 cancer types

Measurement of D*+/- meson production in jets from pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

This paper reports a measurement of D*+/- meson production in jets from proton-proton collisions at a center-of-mass energy of sqrt(s) = 7 TeV at the CERN Large Hadron Collider. The measurement is based on a data sample recorded with the ATLAS detector with an integrated luminosity of 0.30 pb^-1 for jets with transverse momentum between 25 and 70 GeV in the pseudorapidity range |eta| < 2.5. D*+/- mesons found in jets are fully reconstructed in the decay chain: D*+ -> D0pi+, D0 -> K-pi+, and its charge conjugate. The production rate is found to be N(D*+/-)/N(jet) = 0.025 +/- 0.001(stat.) +/- 0.004(syst.) for D*+/- mesons that carry a fraction z of the jet momentum in the range 0.3 < z < 1. Monte Carlo predictions fail to describe the data at small values of z, and this is most marked at low jet transverse momentum.Comment: 10 pages plus author list (22 pages total), 5 figures, 1 table, matches published version in Physical Review

Examining Consumers\u27 Trust in the Food Supply Chain

Consumers are concerned about the quality and safety of their food at all times during the food supply chain, but sensationalized media coverage, lack of knowledge, and recent recalls have made it difficult for consumers to trust the agricultural industry. Because trust drives risk perceptions and acceptance, it is important for agricultural communicators to understand how personal characteristics influence trust in the food supply chain. To fulfill the purpose of this study, a national quota sample of 847 responses to an online questionnaire were collected in March 2019. The results indicated respondents held a moderate level of trust toward production agriculture, food processing, food retail, and food safety regulation, with the greatest level of trust assigned to production agriculture. Trust in these sectors of the food supply chain were also positively correlated to one another. Regression models for trust in each agricultural sector were significant but only accounted for 9% of the variance in the dependent variable at most. Direct engagement in agriculture was a positive predictor in trust across all four areas, and use of social media was a negative predictor for trust. Income and gender were also found to be predictors of trust in production agriculture, food processing, food retail, and food safety regulation. The findings from this study can be used to guide future communication to increase the level of trust in the food supply chain, which would also increase consumers’ purchasing intent

The Impact of Perceived Expectations and Uncertainty on Firm Investment

This paper analyses the (differential) impact of perceived expectations and uncertainty on investment spending in small and large firms. We analyse two types of investment, viz. aggregate investment and investment in energy-saving technologies, using Dutch firm level data. The results show that expectations and uncertainty about input- and output prices and domestic demand have substantial but different effects on investment spending in firms of different sizes. Furthermore, we find evidence, at least for small firms, that there are important differences between the effects of uncertainty about input and output variable