Luncheon address : the Greenspan era : lessons for the future

Greenspan, Alan ; Monetary policy

Nickel-cadmium cells

A high energy density nickel cadmium cell of aerospace quality was designed. The approach used was to utilize manufacturing techniques which produce highly uniform and controlled starting materials in addition to improvements in the overall design. Parameters controlling the production of plaque and both positive and negative plate were studied. Quantities of these materials were produced and prototype cells were assembled to test the proposed design

Origin of mesosiderites as a natural consequence of planet formation

The mineral composition of mesosiderites is described and a theory of the origin and evolution of these meteorites is presented. It is suggested that the asteroid parent body of the mesosiderites also formed in the inner solar system, perhaps just within the orbit of Mars. As a result of close planetary encounters, some bodies that formed near Earth or Venus were gravitationally perturbed into non-circular orbits; a few such bodies passed through the mesosiderite region at high relative velocities, colliding with and destroying a few of the native asteroids. Olivine-rich silicate mantles shattered into small pieces, but the stronger metal cores remained as large fragments. Much of the debris remained in circular orbits and accreted to the basaltic regoliths of intact native asteroids at low relative velocities. The large core fragments that collided with the crust greatly enriched restricted regions of the surface in metal. These localized regions were the mesosiderite progenitors; they accounted for only about 1% of the surface area of the parent bodies

Control of bone remodelling by applied dynamic loads

The data showing the relationship between bone mass and peak strain magnitude prepared and submitted for publication. The data from experiments relating remodelling activity with static or dynamic loads were prepared and submitted for publication. Development of programs to relate the location of remodelling activity with he natural and artificial dynamic strain distributions continued. Experiments on the effect of different strain rates on the remodelling response continued

Heat sterilizable Ni-Cd battery development Quarterly progress report, 1 Oct. - 31 Dec. 1967

Microscopic, X ray diffraction, porosity, and pore size distribution data for heat sterilizable Ni-Cd batter

Static versus dynamic loads as an influence on bone remodelling

Bone remodelling activity in the avian ulna was assessed under conditions of disuse alone, disuse with a superimposed continuous compressive load, and disuse interrupted by a short daily period of intermittent loading. The ulna preparation is made by two submetaphyseal osteotomies, the cut ends of the bone being covered with stainless steel caps which, together with the bone they enclosed, are pierced by pins emerging transcutaneously on the dorsal and ventral surfaces of the wing. The 110 mm long undisturbed section of the bone shaft can be protected from functional loading, loaded continuously in compression by joining the pins with springs, or loaded intermittently in compression by engaging the pins in an Instron machine. Similar loads (525 n) were used in both static and dynamic cases engendering similar peak strains at the bone's midshaft (-2000 x 10-6). The intermitent load was applied at a frequency of 1 Hz during a single 100 second period per day as a ramped square wave, with a rate of change of strain during the ramp of 0.01 per second