Metabolic responses to high pCO2 conditions at a CO2 vent site in juveniles of a marine isopod species assemblage

We are starting to understand the relationship between metabolic rate responses and species' ability to respond to exposure to high pCO2. However, most of our knowledge has come from investigations of single species. The examination of metabolic responses of closely related species with differing distributions around natural elevated CO2 areas may be useful to inform our understanding of their adaptive significance. Furthermore, little is known about the physiological responses of marine invertebrate juveniles to high pCO2, despite the fact they are known to be sensitive to other stressors, often acting as bottlenecks for future species success. We conducted an in situ transplant experiment using juveniles of isopods found living inside and around a high pCO2 vent (Ischia, Italy): the CO2 'tolerant' Dynamene bifida and 'sensitive' Cymodoce truncata and Dynamene torelliae. This allowed us to test for any generality of the hypothesis that pCO2 sensitive marine invertebrates may be those that experience trade-offs between energy metabolism and cellular homoeostasis under high pCO2 conditions. Both sensitive species were able to maintain their energy metabolism under high pCO2 conditions, but in C. truncata this may occur at the expense of [carbonic anhydrase], confirming our hypothesis. By comparison, the tolerant D. bifida appeared metabolically well adapted to high pCO2, being able to upregulate ATP production without recourse to anaerobiosis. These isopods are important keystone species; however, given they differ in their metabolic responses to future pCO2, shifts in the structure of the marine ecosystems they inhabit may be expected under future ocean acidification conditions

Synchrotron radiography studies of shear-induced dilation in semi-solid Al alloys and steels

An improved understanding of the response of solidifying microstructures to load is required to further minimize casting defects and optimize casting processes. This article overviews synchrotron radiography studies that directly measure the micromechanics of semisolid alloy deformation in a thin sample direct-shear cell. It is shown that shear-induced dilation (also known as Reynolds’ dilatancy) occurs in semisolid alloys with morphologies ranging from equiaxed-dendritic to globular, at solid fractions from the dendrite coherency point to ~90% solid, and it occurs in both Al alloys and carbon steels. Discrete-element method simulations that treat solidifying microstructures as granular materials are then used to explore the origins of dilatancy in semisolid alloys

State-of-the-art characterization tools for Al foundry alloys

In this manuscript we review some characterization toolsfor Al foundry alloys. Castability is the ability of an alloyto be cast without formation of defects such as cracks,pores or misruns. Being able to measure, hence to control,these defects is fundamental and plays a critical role forthe development of numerical models for castability.Also melt quality influences these defects formation.Alloy dependent phenomena that determine castabilityare, among others, fluidity and porosity. This manuscriptfocuses on the main characterization tools for measuringfluidity, porosity and melt quality

Tensile properties of Zr70Ni16Cu6Al8 BMG at room and cryogenic temperatures

The mechanical behaviour in tension of a hypoeutectic Zr70Ni16Cu6Al8 Bulk Metallic Glass (BMG) was studied at room (295 K) and cryogenic temperatures (150 K and 77 K) using various strain rates between 10−4 and 10−1 s−1. The yield strength was found to increase at lower temperatures with average values increasing by 16%, from 1503 MPa at 295 K to 1746 MPa at 77 K. The Zr-based BMG was found to exhibit tensile plastic elongation of about 0.4% before fracture at room temperature and high strain rates (10−1 s−1). Even higher tensile plasticity was recorded at low temperatures; plastic deformation was found highest at the intermediate temperature (150 K) reaching remarkable plastic strains in the order of 3.9%, while values up to 1.5% were recorded at 77 K. The lateral surface of the tensile specimens was observed in-situ during deformation using a high frame rate camera offering interesting insights with regard to the deformation mechanisms. Room temperature plasticity occurred through the formation and interaction of several nucleated shear bands before critical failure, while at intermediate and liquid nitrogen temperatures, most of the plastic deformation was accommodated through stable flow within a single shear band

Probing heat generation during tensile plastic deformation of a bulk metallic glass at cryogenic temperature

Despite significant research efforts, the deformation and failure mechanisms of metallic glasses remain not well understood. In the absence of periodic structure, these materials typically deform in highly localized, thin shear bands at ambient and low temperatures. This process usually leads to an abrupt fracture, hindering their wider use in structural applications. The dynamics and temperature effects on the formation and operation of those shear bands have been the focus of long-standing debate. Here, we use a new experimental approach based on localized boiling of liquid nitrogen by the heat generated in the shear bands to monitor the tensile plastic deformation of a bulk metallic glass submerged in a cryogenic bath. With the “nitrogen bubbles heat sensor”, we could capture the heat dissipation along the primary shear banding plane and follow the dynamics of the shear band operation. The observation of nitrogen boiling on the surface of the deforming metallic glass gives direct evidence of temperature increase in the shear bands, even at cryogenic temperatures. An acceleration in bubble nucleation towards the end of the apparent plastic deformation suggests a change from steady-state to runaway shear and premonitions the fracture, allowing us to resolve the sequence of deformation and failure events

On the quality of A354 ingots and its impact on cast product

A study in an automotive casting plant was targeted to address the problem of high rejection rate of a cylinder head casting made from an A354 alloy. Ingots of an A354 alloy from three different suppliers, A, B and C, were analyzed by the reduced pressure test (RPT) and the pressure filtration (PREFIL) test, individually as well as in combination. Hydrogen measurements during casting trials was carried out with an ALSPEK H? analyzer. The results have shown a good agreement with the scrap rate data of the final cast product, and the problem of higher scrap rate was significantly reduced when the ingots of an A354 alloy with the highest oxide content from supplier C were replaced. In order to study the influence of transfer and de-gassing on the melt quality, reduced pressure tests were also conducted along the production line. The effect of melt holding time on the quality of the cast product is also presented. The results from these trials shows that the bifilm index data from the RPT has a potential to be used in an industrial environment for routine melt quality control as the cause of high scrap was successfully identified with this technique

Fiber Mediated Receptor Masking in Non-Infected Bystander Cells Restricts Adenovirus Cell Killing Effect but Promotes Adenovirus Host Co-Existence

The basic concept of conditionally replicating adenoviruses (CRAD) as oncolytic agents is that progenies generated from each round of infection will disperse, infect and kill new cancer cells. However, CRAD has only inhibited, but not eradicated tumor growth in xenograft tumor therapy, and CRAD therapy has had only marginal clinical benefit to cancer patients. Here, we found that CRAD propagation and cancer cell survival co-existed for long periods of time when infection was initiated at low multiplicity of infection (MOI), and cancer cell killing was inefficient and slow compared to the assumed cell killing effect upon infection at high MOI. Excessive production of fiber molecules from initial CRAD infection of only 1 to 2% cancer cells and their release prior to the viral particle itself caused a tropism-specific receptor masking in both infected and non-infected bystander cells. Consequently, the non-infected bystander cells were inefficiently bound and infected by CRAD progenies. Further, fiber overproduction with concomitant restriction of adenovirus spread was observed in xenograft cancer therapy models. Besides the CAR-binding Ad4, Ad5, and Ad37, infection with CD46-binding Ad35 and Ad11 also caused receptor masking. Fiber overproduction and its resulting receptor masking thus play a key role in limiting CRAD functionality, but potentially promote adenovirus and host cell co-existence. These findings also give important clues for understanding mechanisms underlying the natural infection course of various adenoviruses

Treating implicit trauma: a quasi-experimental study comparing the EMDR Therapy Standard Protocol with a ‘Blind 2 Therapist’ version within a trauma capacity building project in Northern Iraq

Psychological trauma is a silent epidemic which presents as a global public health issue, often in the form of post- traumatic stress disorder (PTSD). Eye Movement Desensitisation and Reprocessing (EMDR) Therapy is an empirically supported treatment intervention for PTSD and has been used as part of trauma-capacity building, particularly in low- and middle-income countries (LMIC). For some survivor’s, their trauma experiences cannot be spoken of: they may be alluded to, suggested and though not directly expressed. There are several factors as to why these implicit trauma experiences are ‘unspoken’, for example, when the trauma involves a deep-rooted sense of shame or guilt, a distorted sense of over-responsibility or when to speak of the trauma engenders fear of retribution, reprisal and consequence. This paper will explore the effectiveness of using two protocol variations of EMDR Therapy—standard versus a ‘Blind 2 Therapist’ protocol version as part of a quasi-experimental study which took place in Northern Iraq. The study contains two projects and subsequently tested several hypotheses regarding safety, effectiveness, efficiency and relevance of the ‘Blind 2 Therapist’ protocol within EMDR Therapy. Results indicated support for the B2T protocol intervention with various trauma populations including Yezidi survivors of Islamic State of Iraq and the Levant (ISIL)—also known as Daesh

Effects of oil and global environmental drivers on two keystone marine invertebrates

Ocean warming (OW) and acidification (OA) are key features of global change and are predicted to have negative consequences for marine species and ecosystems. At a smaller scale increasing oil and gas activities at northern high latitudes could lead to greater risk of petroleum pollution, potentially exacerbating the effects of such global stressors. However, knowledge of combined effects is limited. This study employed a scenario-based, collapsed design to investigate the impact of one local acute stressor (North Sea crude oil) and two chronic global drivers (pH for OA and temperature for OW), alone or in combination on aspects of the biology of larval stages of two key invertebrates: the northern shrimp (Pandalus borealis) and the green sea urchin (Strongylocentrotus droebachiensis). Both local and global drivers had negative effects on survival, development and growth of the larval stages. These effects were species- and stage-dependent. No statistical interactions were observed between local and global drivers and the combined effects of the two drivers were approximately equal to the sum of their separate effects. This study highlights the importance of adjusting regulation associated with oil spill prevention to maximize the resilience of marine organisms to predicted future global conditions