Why are some species older than others? A large-scale study of vertebrates.

BACKGROUND: Strong variations are observed between and within taxonomic groups in the age of extant species and these differences can clarify factors that render species more vulnerable to extinction. Understanding the factors that influence the resilience of species is thus a key component of evolutionary biology, but it is also of prime importance in a context of climate change and for conservation in general. We explored the effect of extrinsic and intrinsic factors on the timing of the oldest diversification event in over 600 vertebrate species distributed worldwide. We used phylogenetic comparative methods to show that color polymorphism, latitude and reproduction (the latter through its interaction with latitude) affected the timing of the oldest diversification event within a species. RESULTS: Species from higher latitudes tended to be younger, and colour-polymorphic species were older than monomorphic species. Mode of reproduction was important also, in that the age of oviparous species decreased with latitude, whereas no pattern was apparent for viviparous species. Organisms which have already persisted for a long time may be more likely to deal with future modifications of their environment. CONCLUSIONS: Species that are colour polymorphic, viviparous, and/or live at low latitudes have exhibited resilience to past environmental changes, and hence may be better able to deal with current climate change

On the ultrathin gold film used as buffer layer at the transparent conductive anode/organic electron donor interface

Previously, we have shown that a gold thin film of only 0.5 nm introduced at the interface between the indium tin oxide or ZnO anode and the organic electron donor in organic photovoltaic cells induces a strong improvement of the cell efficiency. Of course a thickness of 0.5 nm corresponds only to an averaged thickness, the films being too thin to be continuous. For a clear understanding of the physical mechanisms that are responsible for this improved behaviour, it is important to know the fractional coverage and the island height of this thin Au film. In the present work, we have used two different techniques, such as treated scanning electron microscope images and analysis of the inelastic part of peaks of X-ray photoelectron spectroscopy spectra, to estimate the gold coverage and island height of the transparent conductive anode. There is an excellent agreement between the results achieved by both methods. Only 15% of the anode is covered, which proves the high efficiency of gold as an anode buffer layer in organic photovoltaic devices

Key parameters design for online battery electrochemical impedance tracker

International audienceNew applications in transport and energy storage require the use of Lithium-ion batteries. Advanced battery management systems including electrochemical impedance measurement are studied for the determination of the state of the battery, the prediction of the autonomy, the failure and security management. Taking into account constraints of cost and simplicity, we propose to use the existing electronics of current control and we evaluate the effect of the electronics design on the performance of a frequency evolutionary estimation of the electrochemical impedance. This recursive method relies on a wideband active approach and provides both an accurate estimate of the impedance in the frequency area and a tracking of its temporal variations. Benefits are the limitation of the data memory required and the amount of operations that can be completely carried out by a target such as a microcontroller. We propose a methodology to design the key parameters of electronics in function of the frequency band of interest and the desired accuracy. We highlighted that electronics of conventional BMS can host this tracking algorithm, with analog to digital converters of 10 bits or more, having an analog stage to adapt their dynamics, and that microcontrollers can be enough powerful to perform calculations, both in terms of number of operations and speed of execution. This design strategy has been applied to define a prototyping environment for a BMS based on an ARM microcontroller which is expected to provide the tracking impedance of a battery every 250 ms with less than 0,5 % of error

Study of CuI thin films properties for application as anode buffer layer in organic solar cells

After chemico-physical characterization of CuI thin films, the structures indium tin oxide (ITO) /CuI are systematically studied. We show that the morphology of the 3 nm thick CuI film depends on its deposition rate. To obtain smooth homogeneous CuI film, it is necessary to depose it at 0.005 nm/s. After optimization of the deposition conditions of CuI, it is shown that it behaves like a template for the organic layer. For instance, when the organic film is copper-phthalocyanine, the molecules which are usually perpendicular to the plane of the substrate lie parallel to it when deposited onto CuI. In a same way, when the electron donor is a prophyrin derivative, CuI allows to double the power conversion efficiency of the cells based on the heterojunction porphyrin/C-60. When CuI is used as anode buffer layer, it increases systematically the short circuit current, the open circuit voltage, thus the efficiency of the organic solar cell. These effects are related, not only to the improvement of the band matching between the ITO and the electron donor, but also to the templating effect of the CuI. Moreover, we show that the beneficial effect of CuI. is effective, not only with ITO, but also with fluorine doped tin oxide

Segmentation of the Himalayas as revealed by arc-parallel gravity anomalies

International audienceLateral variations along the Himalayan arc are suggested by an increasing number of studies and carry important information about the orogen’s segmentation. Here we compile the hitherto most complete land gravity dataset in the region which enables the currently highest resolution plausible analysis. To study lateral variations in collisional structure we compute arc-parallel gravity anomalies (APaGA) by subtracting the average arc-perpendicular profile from our dataset; we compute likewise for topography (APaTA). We find no direct correlation between APaGA, APaTA and background seismicity, as suggested in oceanic subduction context. In the Himalayas APaTA mainly reflect relief and erosional effects, whereas APaGA reflect the deep structure of the orogen with clear lateral boundaries. Four segments are outlined and have disparate flexural geometry: NE India, Bhutan, Nepal & India until Dehradun, and NW India. The segment boundaries in the India plate are related to inherited structures, and the boundaries of the Shillong block are highlighted by seismic activity. We find that large earthquakes of the past millennium do not propagate across the segment boundaries defined by APaGA, therefore these seem to set limits for potential rupture of megathrust earthquakes

Improved performance of organic solar cells by growth optimization of MoO3/CuI double-anode buffer

We investigated the effect of a CuI anode buffer layer (ABL) on the molecular orientation of the copper phthalocyanine (CuPc) in organic photovoltaic cells (OPV cells), and we compare it to the effect of MoO3 buffer layer. While, in the presence of CuI, the CuPc molecules lie down parallel to the substrate, they stand up perpendicular in the case of MoO3. We show that the optical absorption, the morphology, and the JV characteristics of the OPV cells depends strongly on the orientation of the CuPc molecules. The improvement of the OPV cells performance is related to the property modifications induced by the change in molecule orientation. We show that the improvement of the OPV cell performance through the templating effect of CuI depends strongly on the deposition rate of the CuI, because the CuI thin-film morphology depends on this deposition rate. In this context, we show that the use of a double-ABL MoO3/CuI leads to a significant improvement of the cell performance. These results are discussed on the basis of the dual function of MoO3 and CuI. While both of them reduce the hole-injection barrier, CuI improves the CuPc film absorbance through specific molecular order and MoO3 prevents the OPV cells from leakage-path formation

The lncRNA HOTAIR transcription is controlled by HNF4α-induced chromatin topology modulation

The expression of the long noncoding RNA HOTAIR (HOX Transcript Antisense Intergenic RNA) is largely deregulated in epithelial cancers and positively correlates with poor prognosis and progression of hepatocellular carcinoma and gastrointestinal cancers. Furthermore, functional studies revealed a pivotal role for HOTAIR in the epithelial-to-mesenchymal transition, as this RNA is causal for the repressive activity of the master factor SNAIL on epithelial genes. Despite the proven oncogenic role of HOTAIR, its transcriptional regulation is still poorly understood. Here hepatocyte nuclear factor 4-α (HNF4α), as inducer of epithelial differentiation, was demonstrated to directly repress HOTAIR transcription in the mesenchymal-to epithelial transition. Mechanistically, HNF4α was found to cause the release of a chromatin loop on HOTAIR regulatory elements thus exerting an enhancer-blocking activity

The White Rabbit Project

Reliable, fast and deterministic transmission of control information in a network is a need formany distributed systems. One example is timing systems, where a reference frequency is used to accurately schedule time-critical messages. TheWhite Rabbit (WR) project is a multi-laboratory and multi-company effort to bring together the best of the data transfer and timing worlds in a completely open design. It takes advantage of the latest developments for improving timing over Ethernet, such as IEEE 1588 (Precision Time Protocol) and Synchronous Ethernet. The presented approach aims for a general purpose, fieldbus-like transmission system, which provides deterministic data and timing (sub-ns accuracy and ps jitter) to around 1000 stations. It automatically compensates for fiber lengths in the order of 10 km. This paper describes the WR design goals and the specification used for the project. It goes on to describe the central component of the WR system structure - the WR switch - with theoretical considerations about the requirements. Finally, it presents real timing measurements for the first prototypes of WR hardware