Self healing of vacancy defects in single layer graphene and silicene

Self healing mechanisms of vacancy defects in graphene and silicene are studied using first principles calculations. We investigated host adatom adsorption, diffusion, vacancy formation and revealed atomistic mechanisms in the healing of single, double and triple vacancies of single layer graphene and silicene. Silicon adatom, which is adsorbed to silicene at the top site forms a dumbbell like structure by pushing one Si atom underneath. The asymmetric reconstruction of the single vacancy in graphene is induced by the magnetization through the rebonding of two dangling bonds and acquiring a significant magnetic moment through remaining unsaturated dangling bond. In silicene, three two-fold coordinated atoms surrounding the single vacancy become four-fold coordinated and nonmagnetic through rebonding. The energy gained through new bond formation becomes the driving force for the reconstruction. Under the external supply of host atoms, while the vacancy defects of graphene heal perfectly, Stone-Wales defect can form in the course of healing of silicene vacancy. The electronic and magnetic properties of suspended, single layer graphene and silicene are modified by reconstructed vacancy defects.Comment: Published in PRB: http://prb.aps.org/abstract/PRB/v88/i4/e04544

Blended learning in design education: an analysis of students' experiences within the disciplinary differences framework

Cataloged from PDF version of article.Blended learning has already become an indispensable part of education in many fields. However, the majority of existing research on blended learning has assumed homogeneity of disciplines. This study suggests that research highlighting disciplinary effects and differences is much needed to effectively develop courses and tools consonant with the characteristics of each discipline. To help close this research gap, this paper focuses on design education and analyses student experiences in a "blended design studio" that combined the Moodle learning management system, live videoconferencing, and social networking media (Facebook) with traditional face-to-face learning (design studio). Students' perceptions of the methods and tools were elicited through structured and open-ended questions and qualitative variations in responses were categorised. Subsequent quantitative analysis revealed that the characteristics of soft-applied fields require customisation in blended courses and educational system designs in several ways

1 mJ pulse bursts from a Yb-doped fiber amplifier

Cataloged from PDF version of article.We demonstrate burst-mode operation of a polarization-maintaining Yb-doped fiber amplifier capable of generating 60 mu J pulses within bursts of 11 pulses with extremely uniform energy distribution facilitated by a novel feedback mechanism shaping the seed of the burst-mode amplifier. The burst energy can be scaled up to 1 mJ, comprising 25 pulses with 40 mu J average individual energy. The amplifier is synchronously pulse pumped to minimize amplified spontaneous emission between the bursts. Pulse propagation is entirely in fiber and fiber-integrated components until the grating compressor, which allows for highly robust operation. The burst repetition rate is set to 1 kHz and spacing between individual pulses is 10 ns. The 40 mu J pulses are externally compressible to a full width at half-maximum of 600 fs. However, due to the substantial pedestal of the compressed pulses, the effective pulse duration is longer, estimated to be 1.2 ps. (C) 2012 Optical Society of Americ

Model for the hydration of non-polar compounds and polymers

We introduce an exactly solvable statistical-mechanical model of the hydration of non-polar compounds, based on grouping water molecules in clusters where hydrogen bonds and isotropic interactions occur; interactions between clusters are neglected. Analytical results show that an effective strengthening of hydrogen bonds in the presence of the solute, together with a geometric reorganization of water molecules, are enough to yield hydrophobic behavior. We extend our model to describe a non-polar homopolymer in aqueous solution, obtaining a clear evidence of both ``cold'' and ``warm'' swelling transitions. This suggests that our model could be relevant to describe some features of protein folding.Comment: REVTeX, 6 pages, 3 figure

Omacetaxine may have a role in chronic myeloid leukaemia eradication through downregulation of Mcl-1 and induction of apoptosis in stem/progenitor cells

Chronic myeloid leukaemia (CML) is maintained by a rare population of tyrosine kinase inhibitor (TKI)-insensitive malignant stem cells. Our long-term aim is to find a BcrAbl-independent drug that can be combined with a TKI to improve overall disease response in chronic-phase CML. Omacetaxine mepesuccinate, a first in class cetaxine, has been evaluated by clinical trials in TKI-insensitive/resistant CML. Omacetaxine inhibits synthesis of anti-apoptotic proteins of the Bcl-2 family, including (myeloid cell leukaemia) Mcl-1, leading to cell death. Omacetaxine effectively induced apoptosis in primary CML stem cells (CD34<sup>+</sup>38<sup>lo</sup>) by downregulation of Mcl-1 protein. In contrast to our previous findings with TKIs, omacetaxine did not accumulate undivided cells <i>in vitro</i>. Furthermore, the functionality of surviving stem cells following omacetaxine exposure was significantly reduced in a dose-dependant manner, as determined by colony forming cell and the more stringent long-term culture initiating cell colony assays. This stem cell-directed activity was not limited to CML stem cells as both normal and non-CML CD34<sup>+</sup> cells were sensitive to inhibition. Thus, although omacetaxine is not leukaemia stem cell specific, its ability to induce apoptosis of leukaemic stem cells distinguishes it from TKIs and creates the potential for a curative strategy for persistent disease

Peginterferon alfa-2a alone, lamivudine alone, and the two in combination in patients with HBeAg-negative chronic hepatitis B

BACKGROUND: Available treatments for hepatitis B e antigen (HBeAg)-negative chronic hepatitis B are associated with poor sustained responses. As a result, nucleoside and nucleotide analogues are typically continued indefinitely, a strategy associated with the risk of resistance and unknown long-term safety implications. METHODS: We compared the efficacy and safety of peginterferon alfa-2a (180 microg once weekly) plus placebo, peginterferon alfa-2a plus lamivudine (100 mg daily), and lamivudine alone in 177, 179, and 181 patients with HBeAg-negative chronic hepatitis B, respectively. Patients were treated for 48 weeks and followed for an additional 24 weeks. RESULTS: After 24 weeks of follow-up, the percentage of patients with normalization of alanine aminotransferase levels or hepatitis B virus (HBV) DNA levels below 20,000 copies per milliliter was significantly higher with peginterferon alfa-2a monotherapy (59 percent and 43 percent, respectively) and peginterferon alfa-2a plus lamivudine (60 percent and 44 percent) than with lamivudine monotherapy (44 percent, P=0.004 and P=0.003, respectively; and 29 percent, P=0.007 and P=0.003, respectively). Rates of sustained suppression of HBV DNA to below 400 copies per milliliter were 19 percent with peginterferon alfa-2a monotherapy, 20 percent with combination therapy, and 7 percent with lamivudine alone (P<0.001 for both comparisons with lamivudine alone). Loss of hepatitis B surface antigen occurred in 12 patients in the peginterferon groups, as compared with 0 patients in the group given lamivudine alone. Adverse events, including pyrexia, fatigue, myalgia, and headache, were less frequent with lamivudine monotherapy than with peginterferon alfa-2a monotherapy or combination therapy. CONCLUSIONS: Patients with HBeAg-negative chronic hepatitis B had significantly higher rates of response, sustained for 24 weeks after the cessation of therapy, with peginterferon alfa-2a than with lamivudine. The addition of lamivudine to peginterferon alfa-2a did not improve post-therapy response rates. Copyright 2004 Massachusetts Medical Societypublished_or_final_versio

Novel Roles for Actin in Mitochondrial Fission

Mitochondrial dynamics, including fusion, fission and translocation, are crucial to cellular homeostasis, with roles in cellular polarity, stress response and apoptosis. Mitochondrial fission has received particular attention, owing to links with several neurodegenerative diseases. A central player in fission is the cytoplasmic dynamin-related GTPase Drp1, which oligomerizes at the fission site and hydrolyzes GTP to drive membrane ingression. Drp1 recruitment to the outer mitochondrial membrane (OMM) is a key regulatory event, which appears to require a pre-constriction step in which the endoplasmic reticulum (ER) and mitochondrion interact extensively, a process termed ERMD (ER-associated mitochondrial division). It is unclear how ER-mitochondrial contact generates the force required for pre-constriction or why pre-constriction leads to Drp1 recruitment. Recent results, however, show that ERMD might be an actin-based process in mammals that requires the ER-associated formin INF2 upstream of Drp1, and that myosin II and other actin-binding proteins might be involved. In this Commentary, we present a mechanistic model for mitochondrial fission in which actin and myosin contribute in two ways; firstly, by supplying the force for pre-constriction and secondly, by serving as a coincidence detector for Drp1 binding. In addition, we discuss the possibility that multiple fission mechanisms exist in mammals

Scheduling parallel CNC machines with time/cost trade-off considerations

When the processing times of jobs are controllable, selected processing times affect both the manufacturing cost and the scheduling performance. A well-known example for such a case that this paper specifically deals with is the turning operation on a CNC machine. Manufacturing cost of a turning operation is a nonlinear convex function of its processing time. We also know that scheduling decisions are quite sensitive to the processing times. Therefore, this paper considers minimizing total manufacturing cost (F1) and total completion time (F2) objectives simultaneously on identical parallel CNC turning machines. Since decreasing processing time of a job increases its manufacturing cost, we cannot minimize both objectives at the same time, so the problem is to generate non-dominated solutions. We consider the problem of minimizing F1 subject to a given F2 level and give an effective formulation for the problem. For this problem, we prove some optimality properties which facilitated designing an efficient heuristic algorithm to generate approximate non-dominated solutions. Computational results show that proposed algorithm performs almost equal with the GAMS/MINOS commercial solver although it spends much less computation time. © 2005 Elsevier Ltd. All rights reserved

Scheduling preventive maintenance on a single CNC machine

In this study we attempt to deal with process planning, scheduling and preventive maintenance (PM) decisions, simultaneously. The objective is to minimize the total completion time of a set of jobs on a CNC machine. During the process planning, we decide on the processing times of the jobs which are controllable (i.e. they can be easily changed) on CNC machines. Using shorter processing times (higher production rates) would result in greater deterioration of the machine, and we would need to plan more frequent PM visits to the machine, during which it would not be available. Therefore, the selected processing times determine not only the completion times but also the PM visit times. We first provide optimality properties for the joint problem. We propose a new heuristic search algorithm to determine simultaneously the processing times of the jobs, their sequence and the PM schedule