68 research outputs found
Analytical, experimental and numerical study of a graded honeycomb structure under in-plane impact load with low velocity
Given the significance of energy absorption in various industries, light shock absorbers such as honeycomb structure under in-plane and out-of-plane loads have been in the core of attention. The purpose of this research is the analyses of graded honeycomb structure (GHS) behaviour under in-plane impact loading and its optimisation. Primarily, analytical equations for plateau stress and specific energy are represented, taking power hardening model (PHM) and elastic–perfectly plastic model (EPPM) into consideration. For the validation and comparison of acquired analytical equations, the energy absorption of a GHS made of five different aluminium grades is simulated in ABAQUS/CAE. In order to validate the numerical simulation method in ABAQUS, an experimental test has been conducted as the falling a weight with low velocity on a GHS. Numerical results retain an acceptable accordance with experimental ones with a 5.4% occurred error of reaction force. For a structure with a specific kinetic energy, the stress–strain diagram is achieved and compared with the analytical equations obtained. The maximum difference between the numerical and analytical plateau stresses for PHM is 10.58%. However, this value has been measured to be 38.78% for EPPM. In addition, the numerical value of absorbed energy is compared to that of analytical method for two material models. The maximum difference between the numerical and analytical absorbed energies for PHM model is 6.4%, while it retains the value of 48.08% for EPPM. Based on the conducted comparisons, the numerical and analytical results based on PHM are more congruent than EPPM results. Applying sequential quadratic programming method and genetic algorithm, the ratio of structure mass to the absorbed energy is minimised. According to the optimisation results, the structure capacity of absorbing energy increases by 18% compared to the primary model
Ballistic performance of Kevlar fabric impregnated with nanosilica/PEG shear thickening fluid
The experimental and numerical analysis of the ballistic performance of elastomer matrix Kevlar composites
In this paper, the behavior of high-velocity impact of Kevlar fabric and elastomer composites was investigated both experimentally and numerically. The experimental tests were performed by a gas gun device and hemispherical projectiles at different velocities, ranging from 122 m/s to 152 m/s for 2- and 4-layer samples. The penetration resistance of these composites during impact was determined using ABAQUS/Explicit. The present study's novelty lies in choosing the finite element model for Kevlar fabric and elastomer matrix in composites with nonlinear behavior to estimate the damage mechanism in the impact zone. For this purpose, the material model of the formable was used to define the damage criteria for Kevlar, and the material model of the VUMAT was used to consider the non-linear behavior and damage evolution of elastomer matrix with one of the damage criteria. Then, the dynamic behavior of the laminate was studied by a Split Hopkinson Pressure Bar. The effect of the number of layers, the shape of the projectile, the energy absorption and failure mechanisms were studied. The verification of this numerical model with experimental observations showed good agreement. The results reveal that elastomeric composites can cause to increase energy absorption and reduce the damaged area
Improving the fracture toughness and the strength of epoxy using nanomaterials : a review of the current status
The incorporation of nanomaterials in the polymer matrix is considered to be a highly effective technique to improve the mechanical properties of resins. In this paper the effects of the addition of different nanoparticles such as single-walled CNT (SWCNT), double-walled CNT (DWCNT), multi-walled CNT (MWCNT), graphene, nanoclay and nanosilica on fracture toughness, strength and stiffness of the epoxy matrix have been reviewed. The Young's modulus (E), ultimate tensile strength (UTS), mode I (GIC) and mode II (GIIC) fracture toughness of the various nanocomposites at different nanoparticle loadings are compared. The review shows that, depending on the type of nanoparticles, the integration of the nanoparticles has a substantial effect on mode I and mode II fracture toughness, strength and stiffness. The critical factors such as maintaining a homogeneous dispersion and good adhesion between the matrix and the nanoparticles are highlighted. The effect of surface functionalization, its relevancy and toughening mechanism are also scrutinized and discussed. A large variety of data comprised of the mechanical properties of nanomaterial toughened composites reported to date has thus been compiled to facilitate the evolution of this emerging field, and the results are presented in maps showing the effect of nanoparticle loading on mode I fracture toughness, stiffness and strength
QT dispersion in patients with systemic lupus erythematosus: the impact of disease activity
<p>Abstract</p> <p>Background</p> <p>Patients with systemic lupus erythematosus (SLE) have increased cardiovascular morbidity and mortality. Although autopsy studies have documented that the heart is affected in most SLE patients, clinical manifestations occur in less than 10%. QT dispersion is a new parameter that can be used to assess homogeneity of cardiac repolarization and autonomic function. We compared the increase in QT dispersion in SLE patients with high disease activity and mild or moderate disease activity.</p> <p>Methods and Results</p> <p>One hundred twenty-four patients with SLE were enrolled in the study. Complete history and physical exam, ECG, echocardiography, exercise test and SLE disease activity index (SLEDAI) were recorded. Twenty patients were excluded on the basis of our exclusion criteria. The patients were divided to two groups based on SLEDAI: 54 in the high-score group (SLEDAI > 10) and 50 in the low-score group (SLEDAI < 10).</p> <p>QT dispersion was significantly higher in high-score group (58.31 ± 18.66 vs. 47.90 ± 17.41 respectively; <it>P </it>< 0.004). QT dispersion was not significantly higher in patients who had received hydroxychloroquine (54.17 ± 19.36 vs. 50.82 ± 15.96, <it>P </it>= 0.45) or corticosteroids (53.58 ± 19.16 vs. 50.40 + 11.59, <it>P </it>= 0.47). There was a statistically significant correlation between abnormal echocardiographic findings (abnormalities of pericardial effusion, pericarditis, pulmonary hypertension and Libman-Sacks endocarditis) and SLEADI (<it>P </it>< 0.004).</p> <p>Conclusions</p> <p>QT dispersion can be a useful, simple noninvasive method for the early detection of cardiac involvement in SLE patients with active disease. Concerning high chance of cardiac involvement, cardiovascular evaluation for every SLE patient with a SLEDAI higher than 10 may be recommended.</p> <p>Trial registration</p> <p>Clinicaltrial.gov registration <a href="http://www.clinicaltrials.gov/ct2/show/NCT01031797">NCT01031797</a></p
Epidemiological study on some environmental and management parameters affecting on WSD occurrence in Fenneropenaeus indicus and Penaeus vannamei
For the first time white spot disease (WSD) was reported in shrimp farms of khoozestan province, in southwest of IRAN in 2002. Then in 2005 the neighbor province, boushehr, was contaminated. In 2008 WSD outbreak reported in sistan-bloochestan province in southeast of Iran. In 2015 all of southern shrimp farms of country except Hormozgan, the middle southern province, which has remained free of WSD, are being contaminated. White Spot disease suspended shrimp culture in thousands hectares of shrimp farms. Considering that white spot disease has not been observed in Hormozgan province yet, the question is; to what extent environmental and management factors participated in preventing WSD outbreak or cause WSD outbreak. In this study (20102012), the effects of environmental factors and management, stressors that decrease immune system function of shrimp are discussed. In addition, the role of pathogen as the main factor of outbreak is discussed. The goal of this study is to define environmental parameters and management practices associates with outbreak of white spot disease in affected provinces and discover reasons of being Hormozgan province free of this disease. In this study the role of the local environmental factors and management practice stressors in susceptibility to WSD was determine. Both the effects of environmental factors in water of ponds including total ammonia, nitrogen, dissolved oxygen, pH, salinity, transparency, and temperature and management issues related to biosecurity are studied. There were overlaps on physical and chemical parameter values obtained in clear areas with contaminated areas .Results of the data analysis suggest that lack of association with WSD incidence was 7 times greater than WSD incidence despite of disease outbreak in sistan-bloochestan province, so other sources of white spot disease virus incidence was suspected in affected areas. Histopathological examinations and polymerase chain reaction (PCR) tests during project performance did not reveal white spot disease virus evidences in post larvae examined from khoozestan province stocked in farms but disease outbreak was happened in that farms , so we suspected to management practice include feed , pond preparation and carrier of disease. Recorded values of temperature and salinity in some months during inspection in Hormozgan province specified stressful condition that may lead to WSD outbreak, however the disease did not appear. Therefore the hypothesis that the water physical and chemical conditions are reasons to prevent disease outbreak in Hormozgan province is being rejected. The policy of Hormozgan’s fishery authorities, to replaced Fenneropenaeus indicus with specific pathogen free Litopenaeus vannamei, that is more resistant to some of diseases, before incidence of WSD in farms and to before being endemic in the Hormozgan province, made an advantage compare to affected southern provinces that introduced Litopenaeus vannamei after WSD prevalence to their farms. However it does not guarantee to maintain current trend of being Hormozgan province farms free of white spot disease. Therefore establishing the principals of biosecurity are strongly emphasized. Strategies taken by the proficient authorities in preparation of SPF shrimp broodstock can be the most important factor in preventing WSD. Regarding biosecurity principals purchased feed must be free of shrimp head powder. Construction the new shrimp farms should be as far as it could be away from contaminated areas
Numerical Study on the Projectile Impact Resistance of Multi-Layer Sandwich Panels with Cellular Cores
XVII th World Congress of the International Commission of Agricultural and Biosystems Engineering (CIGR) PERFORMANCE OF BIODRAINAGE SYSTEMS IN ARID AND SEMIARID AREAS WITH SALT ACCUMULATION IN SOILS CSBE100116 -Presented at ASABE's 9th International Drain
ABSTRACT Biodrainage is the use of vegetation to manage water fluxes through evapotranspiration. It is an alternative technique that has recently attracted interest in drainage and environmental management. Sometimes "drainage" has become a "dirty word" and its implementation has been restricted. Biodrainage is one of the alternative options. The absence of effluent makes the system attractive. However, biodrainage systems must be sustainable in the long-term. Biodrainage theory does not go back too far. The relationship between soil, climate, irrigation management and salinity is not yet well defined. In this research the SAHYSMOD mathematical model was used with two different approaches. 1) Evapotranspiration rate of plantation strips does not change because of increased salinity with the passage of time (S. Akram et al., 2009); and 2) Evapotranspiration rate decreases due to salt accumulation in the soil. While the first approach showed that in most cases the system can perform for about 15 to 20 years, the second approach showed that the life time of the system may not exceed 10 years. In the second system water table draws down during the first 3 to 4 years; however, it rises afterwards due to lower evapotranspiration rate caused by salt accumulation in the soil of plantation strips. This, however, shows that the system may not be considered sustainable in arid and semi arid areas especially where the irrigation water is saline. The result agrees with Heuperman et al. (2002) who says that it is doubtful that biodrainage can maintain soil salinity to an extent that crops could be grown economically. The result, however, does not agree wit
A Lysimeter Study of Grass Cover and Water Table Depth Effects on Pesticide Residues in Drainage Water
- …
