Magnetic Avalanches in Molecular Nanomagnets

The magnetization of the prototypical molecular magnet Mn12-acetate exhibits a series of sharp steps at low temperatures due to quantum tunneling at specific resonant values of magnetic field applied along the easy c-axis. An abrupt reversal of the magnetic moment of such a crystal can also occur as an avalanche, where the spin reversal proceeds along a "deflagration" front that travels through the sample at subsonic speed. In this article we review experimental results that have been obtained for the ignition temperature and the speed of propagation of magnetic avalanches in molecular nanomagnets. Fits of the data with the theory of magnetic deflagration yield overall qualitative agreement. However, numerical discrepancies indicate that our understanding of these avalanches is incomplete.Comment: Review article for "Perspectives of Mesoscopic Physics - Dedicated to Prof Yoseph Imry's 70th Birthday

Bringing self assessment home: repository profiling and key lines of enquiry within DRAMBORA

Digital repositories are a manifestation of complex organizational, financial, legal, technological, procedural, and political interrelationships. Accompanying each of these are innate uncertainties, exacerbated by the relative immaturity of understanding prevalent within the digital preservation domain. Recent efforts have sought to identify core characteristics that must be demonstrable by successful digital repositories, expressed in the form of check-list documents, intended to support the processes of repository accreditation and certification. In isolation though, the available guidelines lack practical applicability; confusion over evidential requirements and difficulties associated with the diversity that exists among repositories (in terms of mandate, available resources, supported content and legal context) are particularly problematic. A gap exists between the available criteria and the ways and extent to which conformity can be demonstrated. The Digital Repository Audit Method Based on Risk Assessment (DRAMBORA) is a methodology for undertaking repository self assessment, developed jointly by the Digital Curation Centre (DCC) and DigitalPreservationEurope (DPE). DRAMBORA requires repositories to expose their organization, policies and infrastructures to rigorous scrutiny through a series of highly structured exercises, enabling them to build a comprehensive registry of their most pertinent risks, arranged into a structure that facilitates effective management. It draws on experiences accumulated throughout 18 evaluative pilot assessments undertaken in an internationally diverse selection of repositories, digital libraries and data centres (including institutions and services such as the UK National Digital Archive of Datasets, the National Archives of Scotland, Gallica at the National Library of France and the CERN Document Server). Other organizations, such as the British Library, have been using sections of DRAMBORA within their own risk assessment procedures. Despite the attractive benefits of a bottom up approach, there are implicit challenges posed by neglecting a more objective perspective. Following a sustained period of pilot audits undertaken by DPE, DCC and the DELOS Digital Preservation Cluster aimed at evaluating DRAMBORA, it was stated that had respective project members not been present to facilitate each assessment, and contribute their objective, external perspectives, the results may have been less useful. Consequently, DRAMBORA has developed in a number of ways, to enable knowledge transfer from the responses of comparable repositories, and incorporate more opportunities for structured question sets, or key lines of enquiry, that provoke more comprehensive awareness of the applicability of particular threats and opportunities

Supporting children and young people to assume responsibility from their parents for the self-management of their long-term condition: An integrative review

© 2019 John Wiley & Sons Ltd Background: Children and young people with long-term conditions (LTCs) are usually dependent on, or share management with, their families and are expected to develop self-management skills as they mature. However, during adolescence, young people can find it challenging to follow prescribed treatment regimens resulting in poor clinical outcomes. Though reviews have looked at children's and parents' experiences of self-management, none have explicitly examined the parent-to-child transfer of self-management responsibility. Methods: An integrative review was conducted with the aim of exploring the parent-to-child transfer of LTC self-management responsibility, through addressing two questions: (a) How do children assume responsibility from their parents for self-management of their LTC? (b) What influences the parent-to-child transfer of this responsibility? Eight databases were searched for papers published from 1995 to 2017. Methodological quality was assessed; included papers were synthesized to identify themes. Results: Twenty-nine papers were identified. Most papers used qualitative designs and focused on children with diabetes. Participants were predominantly children and/or parents; only two studies included health professionals. Assuming self-management responsibility was viewed as part of normal development but was rarely explored within the context of the child gaining independence in other areas of their life. Children and parents adopted strategies to help the transfer, but there was limited evidence around health professionals' roles and ambivalence around what was helpful. There was a lack of clarity over whether children and parents were aiming for shared management, or self-management, and whether this was a realistic or desired goal for families. Multiple factors such as the child, family, social networks, health professional, and LTC influenced how a child assumed responsibility. Conclusions: Evidence suggests that the parent-to-child transfer of self-management responsibility is a complex, individualized process. Further research across childhood LTCs is needed to explore children's, parents', and professionals' views on this process and what support families require as responsibilities change

Validation and clinical application of molecular methods for the identification of molds in tissue

Background. Invasive fungal infections due to less-common molds are an increasing problem, and accurate diagnosis is difficult.Methods. We used our previously established molecular method, which allows species identification of molds in histological tissue sections, to test sequential specimens from 56 patients with invasive fungal infections who were treated at our institution from 1982 to 2000.Results. The validity of the method was demonstrated with the establishment of a molecular diagnosis in 52 cases (93%). Confirmation of the causative organism was made in all cases in which a mold had been cultured from the tissue specimen. Less-common molds were identified in 7% of cases and appear to be an increasing problem.Conclusions. Our previously established method has proven to be of value in determining the incidence of invasive infection caused by less-common molds. Institutions should continue to pursue diagnosis of invasive fungal infections by means of tissue culture and microbiologic analysis

Prospective evaluation of BDProbeTec strand displacement amplification (SDA) system for diagnosis of tuberculosis in non-respiratory and respiratory samples.

Nucleic acid amplification techniques (NAATs) have been demonstrated to make significant improvements in the diagnosis of tuberculosis (TB), particularly in the time to diagnosis and the diagnosis of smear-negative TB. The BD ProbeTec strand displacement amplification (SDA) system for the diagnosis of pulmonary and non-pulmonary tuberculosis was evaluated. A total of 689 samples were analysed from patients with clinically suspected TB. Compared with culture, the sensitivity and specificity for pulmonary samples were 98 and 89 %, and against final clinical diagnosis 93 and 92 %, respectively. This assay has undergone limited evaluation for non-respiratory samples and so 331 non-respiratory samples were tested, identifying those specimens that were likely to yield a useful result. These were CSF (n = 104), fine needle aspirates (n = 64) and pus (n = 41). Pleural fluid (n = 47) was identified as a poor specimen. A concern in using the SDA assay was that low-positive samples were difficult to interpret; 7.8 % of specimens fell into this category. Indeed, 64 % of the discrepant results, when compared to final clinical diagnosis, could be assigned as low-positive samples. Specimen type did not predict likelihood of a sample being in the low-positive zone. Although the manufacturers do not describe the concept of a low-positive zone, we have found that it aids clinical diagnosis

Comparative grazing behaviour of lactating suckler cows of contrasting genetic merit and genotype

peer-reviewedThe objective of this study was to determine if differences in grazing behaviour exist between lactating suckler cows diverse in genetic merit for the national Irish Replacement index and of two contrasting genotypes. Data from 103 cows: 41 high and 62 low genetic merit, 43 beef and 60 beef x dairy (BDX) cows were available over a single grazing season in 2015. Milk yield, grass dry matter intake (GDMI), cow live weight (BW) and body condition score (BCS) were recorded during the experimental period, with subsequent measures of production efficiency extrapolated. Grazing behaviour data were recorded twice in conjunction with aforementioned measures, using Institute of Grassland and Environmental Research headset behaviour recorders. The effect of genotype and cow genetic merit during mid- and late-lactation on grazing behaviour phenotypes, milk yield, BW, BCS and GDMI were estimated using linear mixed models. Genetic merit had no significant effect on any production parameters investigated, with the exception that low genetic merit had a greater BCS than high genetic merit cows. Beef cows were heavier, had a greater BCS but produced less milk per day than BDX. The BDX cows produced more milk per 100 kg BW and per unit intake and had greater GDMI, intake per bite and rate of GDMI per 100 kg BW than beef cows. High genetic merit cows spent longer grazing and took more bites per day but had a lower rate of GDMI than low genetic merit cows, with the same trend found when expressed per unit of BW. High genetic merit cows spent longer grazing than low genetic merit cows when expressed on a per unit intake basis. Absolute rumination measures were similar across cow genotype and genetic merit. When expressed per unit BW, BDX cows spent longer ruminating per day compared to beef. However, on a per unit intake basis, beef cows ruminated longer and had more mastications than BDX. Intake per bite and rate of intake was positively correlated with GDMI per 100 kg BW. The current study implies that despite large differences in grazing behaviour between cows diverse in genetic merit, few differences were apparent in terms of production efficiency variables extrapolated. Conversely, differences in absolute grazing and ruminating behaviour measurements did not exist between beef cows of contrasting genotype. However, efficiency parameters investigated illustrate that BDX will subsequently convert herbage intake more efficiently to milk production

Projecting prevalence by stage of care for prostate cancer and estimating future health service needs: protocol for a modelling study

Introduction Current strategies for the management of prostate cancer are inadequate in Australia. We will, in this study, estimate current service needs and project the future needs for prostate cancer patients in Australia. Methods and analysis First, we will project the future prevalence of prostate cancer for 2010-2018 using data for 1972-2008 from the New South Wales (NSW) Central Cancer Registry. These projections, based on modelled incidence and survival estimates, will be estimated using PIAMOD (Prevalence, Incidence, Analysis MODel) software. Then the total prevalence will be decomposed into five stages of care: initial care, continued monitoring, recurrence, last year of life and long-term survivor. Finally, data from the NSW Prostate Cancer Care and Outcomes Study, including data on patterns of treatment and associated quality of life, will be used to estimate the type and amount of services that will be needed by prostate cancer patients in each stage of care. In addition, Central Cancer Registry episode data will be used to estimate transition rates from localised or locally advanced prostate cancer to metastatic disease. Medicare and Pharmaceutical Benefits data, linked with Prostate Cancer Care and Outcomes Study data, will be used to complement the Cancer Registry episode data. The methods developed will be applied Australia-wide to obtain national estimates of the future prevalence of prostate cancer for different stages of clinical care. Ethics and dissemination This study was approved by the NSW Population and Health Services Research Ethics Committee. Results of the study will be disseminated widely to different interest groups and organisations through a report, conference presentations and peer-reviewed articles.This work is supported by the Prostate Cancer Foundation of Australia (grant number: PCFA – YI 0410). Both David Smith and Xue Qin Yu are supported by an Australian NHMRC Training Fellowship (Ref 1016598, 550002). Mark Clements is supported by an Australian NHMRC Career Development Award (Ref 471491)

Effect of parallel magnetic field on the Zero Differential Resistance State

The non-linear zero-differential resistance state (ZDRS) that occurs for highly mobile two-dimensional electron systems in response to a dc bias in the presence of a strong magnetic field applied perpendicular to the electron plane is suppressed and disappears gradually as the magnetic field is tilted away from the perpendicular at fixed filling factor $\nu$. Good agreement is found with a model that considers the effect of the Zeeman splitting of Landau levels enhanced by the in-plane component of the magnetic field.Comment: 4 pages, 4 figure

Low cost silicon solar array project large area silicon sheet task: Silicon web process development

Growth configurations were developed which produced crystals having low residual stress levels. The properties of a 106 mm diameter round crucible were evaluated and it was found that this design had greatly enhanced temperature fluctuations arising from convection in the melt. Thermal modeling efforts were directed to developing finite element models of the 106 mm round crucible and an elongated susceptor/crucible configuration. Also, the thermal model for the heat loss modes from the dendritic web was examined for guidance in reducing the thermal stress in the web. An economic analysis was prepared to evaluate the silicon web process in relation to price goals

Silicon web process development

Thirty-five (35) furnace runs were carried out during this quarter, of which 25 produced a total of 120 web crystals. The two main thermal models for the dendritic growth process were completed and are being used to assist the design of the thermal geometry of the web growth apparatus. The first model, a finite element representation of the susceptor and crucible, was refined to give greater precision and resolution in the critical central region of the melt. The second thermal model, which describes the dissipation of the latent heat to generate thickness-velocity data, was completed. Dendritic web samples were fabricated into solar cells using a standard configuration and a standard process for a N(+) -P-P(+) configuration. The detailed engineering design was completed for a new dendritic web growth facility of greater width capability than previous facilities