Safety of Li-SOCl2 cells

The safety of lithium thionyl chloride cells has been a concern of JPL for some time in the development of these cells for NASA's use. Because the safety problems are complex and several issues are interrelated it was decided that it would be best to put together an organized review of the safety issues, which are reviewed here. Hazards are classified in three categories: (1) cell leakage, a problem dealing with construction or materials; (2) venting of toxic gases through seals and welds, considered a mild hazard in which electrolyte and gas is released; and (3) violent rupture or controlled rupture of cells with the possibility of explosion of the materials inside. These hazards and their effects are detailed along with possible ways of dealing with them

Test results of JPL LiSOCl sub 2 cells

In the development of high rate Li-SO-Cl2 cells for various applications, the goal is to achieve 300 watt-hours per kilogram at the C/2 (5 amp) rate in a D cell configuration. The JPL role is to develop the understanding of the performance, life, and safety limiting characteristics in the cell and to transfer the technology to a manufacturer to produce a safe, high quality product in a reproducible manner. The approach taken to achieve the goals is divided into four subject areas: cathode processes and characteristics; chemical reactions and safety; cell design and assembly; and performance and abuse testing. The progress made in each of these areas is discussed

Development of ambient temperature secondary lithium cells

JPL is developing ambient temperature secondary lithium cells for future spacecraft applications. Prior studies on experimental laboratory type Li-TiS2 cells yielded promising results in terms of cycle life and rate capability. To further assess the performance of this cell, 5 Ah engineering model cells were developed. Initially baseline cells were designed and fabricated. Each cell had 15 cathodes and 16 anodes and the ratio of anode to cathode capacity is 6:1. A solution of 1.5 molar LiAsF6 in 2Me-THF was used as the electrolyte. Cells were evaluated for their cycle life at C/1 and C/5 discharge rates and 100 percent depth of discharge. The cells were cycled between voltage limits 1.7 and 2.8 volts. The rate of charge in all cases is C/10. The results obtained indicate that cells can operate at C/10 to C/2 discharge rates and have an initial energy density of 70 Wh/kg. Cells delivered more than 100 cycles at C/2 discharge rate. The details of cell design, the test program, and the results obtained are described

Chemical analysis of charged Li/SO(sub)2 cells

The initial focus of the program was to confirm that charging can indeed result in explosions and constitute a significant safety problem. Results of this initial effort clearly demonstrated that cells do indeed explode on charge and that charging does indeed constitute a real and severe safety problem. The results of the effort to identify the chemical reactions involved in and responsible for the observed behavior are described

An update of the JPL program to develop Li-SOCl2 cells

The goal of producing spiral wound D cell was met. The cell design and electrodes, particularly the carbon cathodes were produced in-house. Also all parts were assembled, the welding performed, the electrolyte aided and the cells sealed in-house. The lithium capacity (theoretical) was 19.3 Ah and that of the SOCl2 in the 1.8 m LiAlCl4 electrolyte, 16.4 Ah (a greater excess of SOCl2 is necessary for safe high rate operation). The electrode surface area was 452 sq cm. The carbon electrode comprised Shawinigen Black/Teflon -30 (90/10 by weight) mixture 0.020 inches thick on an expanded metal screen prepared in the JPL laboratory. There were two tab connections to the cathode. The 0.0078 inch thick lithium foil was rolled into an expanded nickel screen. The separator was Mead 934-5 fiberglass material

The Evolution of the Global Star Formation History as Measured from the Hubble Deep Field

The Hubble Deep Field (HDF) is the deepest set of multicolor optical photometric observations ever undertaken, and offers a valuable data set with which to study galaxy evolution. Combining the optical WFPC2 data with ground-based near-infrared photometry, we derive photometrically estimated redshifts for HDF galaxies with J<23.5. We demonstrate that incorporating the near-infrared data reduces the uncertainty in the estimated redshifts by approximately 40% and is required to remove systematic uncertainties within the redshift range 1<z<2. Utilizing these photometric redshifts, we determine the evolution of the comoving ultraviolet (2800 A) luminosity density (presumed to be proportional to the global star formation rate) from a redshift of z=0.5 to z=2. We find that the global star formation rate increases rapidly with redshift, rising by a factor of 12 from a redshift of zero to a peak at z~1.5. For redshifts beyond 1.5, it decreases monotonically. Our measures of the star formation rate are consistent with those found by Lilly et al. (1996) from the CFRS at z 2, and bridge the redshift gap between those two samples. The overall star formation or metal enrichment rate history is consistent with the predictions of Pei and Fall (1995) based on the evolving HI content of Lyman-alpha QSO absorption line systems.Comment: Latex format, 10 pages, 3 postscript figures. Accepted for publication in Ap J Letter

Expanding the Family of Grassmannian Kernels: An Embedding Perspective

Modeling videos and image-sets as linear subspaces has proven beneficial for many visual recognition tasks. However, it also incurs challenges arising from the fact that linear subspaces do not obey Euclidean geometry, but lie on a special type of Riemannian manifolds known as Grassmannian. To leverage the techniques developed for Euclidean spaces (e.g, support vector machines) with subspaces, several recent studies have proposed to embed the Grassmannian into a Hilbert space by making use of a positive definite kernel. Unfortunately, only two Grassmannian kernels are known, none of which -as we will show- is universal, which limits their ability to approximate a target function arbitrarily well. Here, we introduce several positive definite Grassmannian kernels, including universal ones, and demonstrate their superiority over previously-known kernels in various tasks, such as classification, clustering, sparse coding and hashing

Pressure induced electronic topological transition in Sb2S3

Pressure induced electronic topological transitions in the wide band gap semiconductor Sb2S3 (Eg = 1.7-1.8 eV) with similar crystal symmetry (SG: Pnma) to its illustrious analog, Sb2Se3, has been studied using Raman spectroscopy, resistivity and the available literature on the x-ray diffraction studies. In this report, the vibrational and the transport properties of Sb2S3 have been studied up to 22 GPa and 11 GPa, respectively. We observed the softening of phonon modes Ag(2), Ag(3) and B2g and a sharp anomaly in their line widths at 4 GPa. The resistivity studies also shows an anomaly around this pressure. The changes in resistivity as well as Raman line widths can be ascribed to the changes in the topology of the Fermi surface which induces the electron-phonon and the strong phonon-phonon coupling, indicating a clear evidence of the electronic topological transition (ETT) in Sb2S3. The pressure dependence of a/c ratio plot obtained from the literature showed a minimum at ~ 5 GPa, which is consistent with our high pressure Raman and resistivity results. Finally, we give the plausible reasons for the non-existence of a non-trivial topological state in Sb2S3 at high pressures.Comment: 24 pages, 6 Figures, 2 tables submitted for publicatio