Development of low cost packaged fibre optic sensors for use in reinforced concrete structures

There is an ongoing need to measure strains in reinforced concrete structures more reliably and under a range of circumstances e.g. long term durability (such as effects of cracking and reinforcement corrosion), response to normal working loads and response under abnormal load conditions. Fibre optic sensors have considerable potential for this purpose and have the additional advantages, including of immunity to electromagnetic interference and light weight (Grattan et al., 2000). This is important in railway scenarios and particularly so when the lines are electrified. Their small size allows for easy installation. However, their use as commercial ‘packaged’ devices (traditionally seen as necessary to achieve adequate robustness) is limited by their high cost relative to other sensor devices such as encapsulated electric resistance strain gauges. This paper describes preliminary work to produce a cost-effective and easy-to-use technique for encapsulating fibre optic sensors in resin using 3D printing techniques to produce a robust, inexpensive ‘packaged’ sensor system suitable for use with concrete structures. The work done to date has shown this to be a convenient and economical way of producing multiple sensors which were suitable for both surface mounting and embedment in reinforced concrete structures. The proof-of-concept testing to which the trial packages were subjected is described in the paper and the results indicate that 3D printed packages have considerable potential for further development and use in a variety of civil engineering applications, competing well with more conventional sensor systems

Performance of the WaveBurst algorithm on LIGO data

In this paper we describe the performance of the WaveBurst algorithm which was designed for detection of gravitational wave bursts in interferometric data. The performance of the algorithm was evaluated on the test data set collected during the second LIGO Scientific run. We have measured the false alarm rate of the algorithm as a function of the threshold and estimated its detection efficiency for simulated burst waveforms.Comment: proceedings of GWDAW, 2003 conference, 13 pages, 6 figure

Optical fibre sensing: A solution for industry

Optical fibres have been explored widely for their sensing capability to meet increasing industrial needs, building on their success in telecommunications. This paper provides a review of research activities at City University of London in response to industrial challenges through the development of a range of fibre Bragg grating (FBG)-based sensors for transportation structural monitoring. For marine propellers, arrays of FBGs mapped onto the surface of propeller blades allow for capturing vibrational modes, with reference to simulation data. The research funded by EU Cleansky programme enables the development of self-sensing electric motor drives to support 'More Electric Aircraft' concept. The partnership with Faiveley Brecknell Willis in the UK enables the integration of FBG sensors into the railway current-collecting pantographs for real-time condition monitoring when they are operating under 25kV conditions

Cancer and systemic inflammation: treat the tumour and treat the host

Determinants of cancer progression and survival are multifactorial and host responses are increasingly appreciated to have a major role. Indeed, the development and maintenance of a systemic inflammatory response has been consistently observed to confer poorer outcome, in both early and advanced stage disease. For patients, cancer-associated symptoms are of particular importance resulting in a marked impact on day-to-day quality of life and are also associated with poorer outcome. These symptoms are now recognised to cluster with one another with anorexia, weight loss and physical function forming a recognised cluster whereas fatigue, pain and depression forming another. Importantly, it has become apparent that these symptom clusters are associated with presence of a systemic inflammatory response in the patient with cancer. Given the understanding of the above, there is now a need to intervene to moderate systemic inflammatory responses, where present. In this context the rationale for therapeutic intervention using nonselective anti-inflammatory agents is clear and compelling and likely to become a part of routine clinical practice in the near future. The published literature on therapeutic intervention using anti-inflammatory agents for cancer-associated symptoms was reviewed. There are important parallels with the development of useful treatments for the systemic inflammatory response in patients with rheumatological disease and cardiovascular disease

Charged pion form factor between Q^2=0.60 and 2.45 GeV^2. II. Determination of, and results for, the pion form factor

The charged pion form factor, Fpi(Q^2), is an important quantity which can be used to advance our knowledge of hadronic structure. However, the extraction of Fpi from data requires a model of the 1H(e,e'pi+)n reaction, and thus is inherently model dependent. Therefore, a detailed description of the extraction of the charged pion form factor from electroproduction data obtained recently at Jefferson Lab is presented, with particular focus given to the dominant uncertainties in this procedure. Results for Fpi are presented for Q^2=0.60-2.45 GeV^2. Above Q^2=1.5 GeV^2, the Fpi values are systematically below the monopole parameterization that describes the low Q^2 data used to determine the pion charge radius. The pion form factor can be calculated in a wide variety of theoretical approaches, and the experimental results are compared to a number of calculations. This comparison is helpful in understanding the role of soft versus hard contributions to hadronic structure in the intermediate Q^2 regime.Comment: 18 pages, 11 figure

Separated Response Function Ratios in Exclusive, Forward pi^{+/-} Electroproduction

The study of exclusive $\pi^{\pm}$ electroproduction on the nucleon, including separation of the various structure functions, is of interest for a number of reasons. The ratio $R_L=\sigma_L^{\pi^-}/\sigma_L^{\pi^+}$ is sensitive to isoscalar contamination to the dominant isovector pion exchange amplitude, which is the basis for the determination of the charged pion form factor from electroproduction data. A change in the value of $R_T=\sigma_T^{\pi^-}/\sigma_T^{\pi^+}$ from unity at small $-t$, to 1/4 at large $-t$, would suggest a transition from coupling to a (virtual) pion to coupling to individual quarks. Furthermore, the mentioned ratios may show an earlier approach to pQCD than the individual cross sections. We have performed the first complete separation of the four unpolarized electromagnetic structure functions above the dominant resonances in forward, exclusive $\pi^{\pm}$ electroproduction on the deuteron at central $Q^2$ values of 0.6, 1.0, 1.6 GeV$^2$ at $W$=1.95 GeV, and $Q^2=2.45$ GeV$^2$ at $W$=2.22 GeV. Here, we present the $L$ and $T$ cross sections, with emphasis on $R_L$ and $R_T$, and compare them with theoretical calculations. Results for the separated ratio $R_L$ indicate dominance of the pion-pole diagram at low $-t$, while results for $R_T$ are consistent with a transition between pion knockout and quark knockout mechanisms.Comment: 6 pages, 3 figure

Bayesian Wavelet Shrinkage of the Haar-Fisz Transformed Wavelet Periodogram.

It is increasingly being realised that many real world time series are not stationary and exhibit evolving second-order autocovariance or spectral structure. This article introduces a Bayesian approach for modelling the evolving wavelet spectrum of a locally stationary wavelet time series. Our new method works by combining the advantages of a Haar-Fisz transformed spectrum with a simple, but powerful, Bayesian wavelet shrinkage method. Our new method produces excellent and stable spectral estimates and this is demonstrated via simulated data and on differenced infant electrocardiogram data. A major additional benefit of the Bayesian paradigm is that we obtain rigorous and useful credible intervals of the evolving spectral structure. We show how the Bayesian credible intervals provide extra insight into the infant electrocardiogram data

The Onset of Quark-Hadron Duality in Pion Electroproduction

A large data set of charged-pion electroproduction from both hydrogen and deuterium targets has been obtained spanning the low-energy residual-mass region. These data conclusively show the onset of the quark-hadron duality phenomenon, as predicted for high-energy hadron electroproduction. We construct several ratios from these data to exhibit the relation of this phenomenon to the high-energy factorization ansatz of electron-quark scattering and subsequent quark-to- pion production mechanisms.Comment: 11 pages, 3 figures, accepted in Phys. Rev. Lett. Tables adde

Separated Kaon Electroproduction Cross Section and the Kaon Form Factor from 6 GeV JLab Data

The $^{1}H$($e,e^\prime K^+$)$\Lambda$ reaction was studied as a function of the Mandelstam variable $-t$ using data from the E01-004 (FPI-2) and E93-018 experiments that were carried out in Hall C at the 6 GeV Jefferson Lab. The cross section was fully separated into longitudinal and transverse components, and two interference terms at four-momentum transfers $Q^2$ of 1.00, 1.36 and 2.07 GeV$^2$. The kaon form factor was extracted from the longitudinal cross section using the Regge model by Vanderhaeghen, Guidal, and Laget. The results establish the method, previously used successfully for pion analyses, for extracting the kaon form factor. Data from 12 GeV Jefferson Lab experiments are expected to have sufficient precision to distinguish between theoretical predictions, for example recent perturbative QCD calculations with modern parton distribution amplitudes. The leading-twist behavior for light mesons is predicted to set in for values of $Q^2$ between 5-10 GeV$^2$, which makes data in the few GeV regime particularly interesting. The $Q^2$ dependence at fixed $x$ and $-t$ of the longitudinal cross section we extracted seems consistent with the QCD factorization prediction within the experimental uncertainty