Lower atmospheric temperature profile measurements using a Raman lidar

A Raman lidar system was used to measure the temperature profile of the upper troposphere and lower stratosphere. The system consists of a tripled Nd-YAG laser and a 1.5 meter diameter telescope. Two photomultipliers are used at the output of the telescope to allow for measurements at both the laser wavelength and at the Raman shifted wavelength due to atmospheric nitrogen. The signal from the photomultipliers is recorded as photon counts in 1 microsec bins. The results of a number of laser shots are summed together to provide atmospheric returns which have acceptable signal to noise characteristics. Measurements of the Raman nitrogen return were acquired up to an altitude in excess of 20 km. Temperature profiles were retrieved from the attenuation corrected Raman nitrogen return assuming the atmosphere to be in hydrostatic equilibrium and using the ideal gas law. Retrieved temperature profiles are shown compared with independent temperature measurements

High-order space-time finite element schemes for acoustic and viscodynamic wave equations with temporal decoupling

Copyright @ 2014 The Authors. This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited.We revisit a method originally introduced by Werder et al. (in Comput. Methods Appl. Mech. Engrg., 190:6685–6708, 2001) for temporally discontinuous Galerkin FEMs applied to a parabolic partial differential equation. In that approach, block systems arise because of the coupling of the spatial systems through inner products of the temporal basis functions. If the spatial finite element space is of dimension D and polynomials of degree r are used in time, the block system has dimension (r + 1)D and is usually regarded as being too large when r > 1. Werder et al. found that the space-time coupling matrices are diagonalizable over inline image for r ⩽100, and this means that the time-coupled computations within a time step can actually be decoupled. By using either continuous Galerkin or spectral element methods in space, we apply this DG-in-time methodology, for the first time, to second-order wave equations including elastodynamics with and without Kelvin–Voigt and Maxwell–Zener viscoelasticity. An example set of numerical results is given to demonstrate the favourable effect on error and computational work of the moderately high-order (up to degree 7) temporal and spatio-temporal approximations, and we also touch on an application of this method to an ambitious problem related to the diagnosis of coronary artery disease

Material parameter estimation and hypothesis testing on a 1D viscoelastic stenosis model: Methodology

This is the post-print version of the final published paper that is available from the link below. Copyright @ 2013 Walter de Gruyter GmbH.Non-invasive detection, localization and characterization of an arterial stenosis (a blockage or partial blockage in the artery) continues to be an important problem in medicine. Partial blockage stenoses are known to generate disturbances in blood flow which generate shear waves in the chest cavity. We examine a one-dimensional viscoelastic model that incorporates Kelvin–Voigt damping and internal variables, and develop a proof-of-concept methodology using simulated data. We first develop an estimation procedure for the material parameters. We use this procedure to determine confidence intervals for the estimated parameters, which indicates the efficacy of finding parameter estimates in practice. Confidence intervals are computed using asymptotic error theory as well as bootstrapping. We then develop a model comparison test to be used in determining if a particular data set came from a low input amplitude or a high input amplitude; this we anticipate will aid in determining when stenosis is present. These two thrusts together will serve as the methodological basis for our continuing analysis using experimental data currently being collected.National Institute of Allergy and Infectious Diseases, Air Force Office of Scientific Research, Department of Education, and Engineering and Physical Sciences Research Council

Conforming finite element methods for the clamped plate problem

Finite element methods for solving biharmonic boundary value problems are considered. The particular problem discussed is that of a clamped thin plate. This problem is reformulated in a weak, form in the Sobolev space Techniques for setting up conforming trial Functions are utilized in a Galerkin technique to produce finite element solutions. The shortcomings of various trial function formulations are discussed, and a macro—element approach to local mesh refinement using rectangular elements is given

Identifying key denning habitat to conserve brown bear (Ursus arctos) in Croatia

CONTEXT: The preservation of denning habitat is paramount to the recovery of threatened bear populations because of the effect that den site disturbance can have on cub mortality. Understanding habitat suitability for denning can allow management efforts to be directed towards the regions where conservation interventions would be most effective. AIM: We sought to identify the environmental and anthropogenic habitat variables associated with the presence of Eurasian brown bear (Ursus arctos) den sites in Croatia. Based on these associations, in order to inform future conservation decisions, we also sought to identify regions of high suitability for denning across Croatia. METHODS: Using the locations of 91 dens inhabited by bears between 1982 and 2011, we opted for the presence-only modelling option in software Maxent to determine the most important predictors of den presence, and thus predict the distribution of high-value denning habitat across Croatia. KEY RESULTS: We found that structural elements were the most important predictors, with ruggedness and elevation both relating positively to den presence. However, distance to nearest settlement was also positively associated with den presence. CONCLUSION: We determine that there is considerable denning habitat value in areas with high and rugged terrain as well as areas with limited human activity. We suspect that high and rugged terrain contains a greater concentration of the karstic formations used for denning than lower-lying regions. IMPLICATIONS: Our study presents the first habitat suitability model for brown bears in Croatia, and identifies core areas suitable for denning both within and outside the species’ current range. As such, it provides useful evidence for conservation decision making and the development of scientifically-based management plans. Our results also support the need for finer spatial scale studies that can reveal specific denning preferences of subpopulations

STROZ Lidar Results at the MOHAVE III Campaign, October, 2009, Table Mountain, CA

During October, 2009 the GSFC STROZ Lidar participated in a campaign at the JPL Table Mountain Facility (Wrightwood, CA, 2285 m Elevation) to measure vertical profiles of water vapor from near the ground to the lower stratosphere. On eleven nights, water vapor, aerosol, temperature and ozone profiles were measured by the STROZ lidar, two other similar lidars, frost-point hygrometer sondes, and ground-based microwave instruments made measurements. Results from these measurements and an evaluation of the performance of the STROZ lidar during the campaign will be presented in this paper. The STROZ lidar was able to measure water vapor up to 13-14 km ASL during the campaign. We will present results from all the STROZ data products and comparisons with other instruments made. Implications for instrumental changes will be discussed

Prescription drug monitoring program data tracking of opioid addiction treatment outcomes in integrated dual diagnosis care involving injectable naltrexone

BACKGROUND AND OBJECTIVES: Fourfold increases in opioid prescribing and dispensations over 2 decades in the U.S. has paralleled increases in opioid addictions and overdoses, requiring new preventative, diagnostic, and treatment strategies. This study examines Prescription Drug Monitoring Program (PDMP) tracking as a novel measure of opioid addiction treatment outcomes in a university-affiliated integrated mental health-addiction treatment clinic. METHODS: Repeated measure parametrics examined PDMP and urine drug screening (UDS) data before and after first injection for all patients (N = 68) who received at least one long-acting naltrexone injection (380 mg/IM) according to diagnostic groupings of having either (i) alcohol (control); (ii) opioid; or (iii) combined alcohol and opioid use disorders. RESULTS: There were no group differences post-injection in treatment days, injections delivered, or treatment service encounters. UDS and PDMP measures of opioid exposures were greater in opioid compared to alcohol-only patients. Post-first injection, UDS's positive for opioids declined (p < .05) along with PDMP measures of opioid prescriptions (p < .001), doses (p < .01), types (p < .001), numbers of dispensing prescribers (p < .001) and pharmacies (p < .001). Opioid patients without alcohol disorders showed the best outcomes with 50% to 80% reductions in PDMP-measures of opioids, down to levels of alcohol-only patients. CONCLUSIONS: This study shows PDMP utility for measuring opioid addiction treatment outcomes, supporting the routine use of PDMPs in clinical and research settings. SCIENTIFIC SIGNIFICANCE: These findings demonstrate that opioid addiction in patients with complex addictions and mental illnesses comorbidities can show effective treatment responses as measured by PDMP tracking of decreases in opioid prescriptions to those patients. (Am J Addict 2016;25:557-564)

The METCRAX II Field Experiment: A Study of Downslope Windstorm-Type Flows in Arizona\u2019s Meteor Crater

The second Meteor Crater Experiment (METCRAX II) was conducted in October 2013 at Arizona\u2019s Meteor Crater. The experiment was designed to investigate nighttime downslope windstorm 12type flows that form regularly above the inner southwest sidewall of the 1.2-km diameter crater as a southwesterly mesoscale katabatic flow cascades over the crater rim. The objective of METCRAX II is to determine the causes of these strong, intermittent, and turbulent inflows that bring warm-air intrusions into the southwest part of the crater. This article provides an overview of the scientific goals of the experiment; summarizes the measurements, the crater topography, and the synoptic meteorology of the study period; and presents initial analysis results