Unexpected Scaling of the Performance of Carbon Nanotube Transistors

We show that carbon nanotube transistors exhibit scaling that is qualitatively different than conventional transistors. The performance depends in an unexpected way on both the thickness and the dielectric constant of the gate oxide. Experimental measurements and theoretical calculations provide a consistent understanding of the scaling, which reflects the very different device physics of a Schottky barrier transistor with a quasi-one-dimensional channel contacting a sharp edge. A simple analytic model gives explicit scaling expressions for key device parameters such as subthreshold slope, turn-on voltage, and transconductance.Comment: 4 pages, 4 figure

MODIS Cloud Optical Property Retrieval Uncertainties Derived from Pixel-Level VNIR/SWIR Radiometric Uncertainties

Moderate Resolution Imaging Spectroradiometer (MODIS) retrievals of optical thickness and effective particle radius for liquid water and ice phase clouds employ a well-known VNIR/ SWIR solar reflectance technique. For this type of algorithm, we evaluate the quantitative uncertainty in simultaneous retrievals of these two cloud parameters to pixel-level radiometric calibration estimates and other fundamental (and tractable) error sources

Spin dependent transport of ``nonmagnetic metal/zigzag nanotube encapsulating magnetic atoms/nonmagnetic metal'' junctions

Towards a novel magnetoresistance (MR) device with a carbon nanotube, we propose ``nonmagnetic metal/zigzag nanotube encapsulating magnetic atoms/nonmagnetic metal'' junctions. We theoretically investigate how spin-polarized edges of the nanotube and the encapsulated magnetic atoms influence on transport. When the on-site Coulomb energy divided by the magnitude of transfer integral, $U/|t|$, is larger than 0.8, large MR effect due to the direction of spins of magnetic atoms, which has the magnitude of the MR ratio of about 100%, appears reflecting such spin-polarized edges.Comment: 4 pages, 3 figures, accepted for publication in Synth. Metal

Single-Walled Carbon Nanotubes as Shadow Masks for Nanogap Fabrication

We describe a technique for fabricating nanometer-scale gaps in Pt wires on insulating substrates, using individual single-walled carbon nanotubes as shadow masks during metal deposition. More than 80% of the devices display current-voltage dependencies characteristic of direct electron tunneling. Fits to the current-voltage data yield gap widths in the 0.8-2.3 nm range for these devices, dimensions that are well suited for single-molecule transport measurements

Multi-sensor Cloud Retrieval Simulator and Remote Sensing from Model Parameters

In this paper we describe a general procedure for calculating synthetic sensor radiances from variable output from a global atmospheric forecast model. In order to take proper account of the discrepancies between model resolution and sensor footprint, the algorithm takes explicit account of the model subgrid variability, in particular its description of the probability density function of total water (vapor and cloud condensate.) The simulated sensor radiances are then substituted into an operational remote sensing algorithm processing chain to produce a variety of remote sensing products that would normally be produced from actual sensor output. This output can then be used for a wide variety of purposes such as model parameter verification, remote sensing algorithm validation, testing of new retrieval methods and future sensor studies.We show a specific implementation using the GEOS-5 model, the MODIS instrument and the MODIS Adaptive Processing System (MODAPS) Data Collection 5.1 operational remote sensing cloud algorithm processing chain (including the cloud mask, cloud top properties and cloud optical and microphysical properties products). We focus on clouds because they are very important to model development and improvement

Quantifying the Impacts of Subpixel Reflectance Variability on Cloud Optical Thickness and Effective Radius Retrievals Based On HighResolution ASTER Observations

TOOLS SHAREAbstractRecently, Zhang et al. (2016) presented a mathematical framework based on a secondorder Taylor series expansion in order to quantify the planeparallel homogeneous bias (PPHB) in cloud optical thickness () and effective droplet radius (r(sub eff)) retrieved from the bispectral solar reflective method. This study provides observational validation of the aforementioned framework, using highresolution reflectance observations from the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) over 48 marine boundary layer cloud scenes. ASTER reflectances at a horizontal resolution of 30 m are aggregated up to a scale of 1,920 m, providing retrievals of and r(sub eff) at different spatial resolutions. A comparison between the PPHB derived from these retrievals and the predicted PPHB from the mathematical framework reveals a good agreement with correlation coefficients of r > 0.97 (for ) and r > 0.79 (for r(sub eff)). To test the feasibility of PPHB predictions for present and future satellite missions, a scale analysis with varying horizontal resolutions of the subpixel and pixellevel observations is performed, followed by tests of corrections with only limited observational highresolution data. It is shown that for reasonably thick clouds with a mean subpixel larger than 5, correlations between observed and predicted PPHB remain high, even if the number of available subpixels decreases or just a single band provides the information about subpixel reflectance variability. Only for thin clouds the predicted r(sub eff) become less reliable, which can be attributed primarily to an increased retrieval uncertainty for r(sub eff)

Detection of Multi-Layer and Vertically-Extended Clouds Using A-Train Sensors

The detection of mUltiple cloud layers using satellite observations is important for retrieval algorithms as well as climate applications. In this paper, we describe a relatively simple algorithm to detect multiple cloud layers and distinguish them from vertically-extended clouds. The algorithm can be applied to coincident passive sensors that derive both cloud-top pressure from the thermal infrared observations and an estimate of solar photon pathlength from UV, visible, or near-IR measurements. Here, we use data from the A-train afternoon constellation of satellites: cloud-top pressure, cloud optical thickness, the multi-layer flag from the Aqua MODerate-resolution Imaging Spectroradiometer (MODIS) and the optical centroid cloud pressure from the Aura Ozone Monitoring Instrument (OMI). For the first time, we use data from the CloudSat radar to evaluate the results of a multi-layer cloud detection scheme. The cloud classification algorithms applied with different passive sensor configurations compare well with each other as well as with data from CloudSat. We compute monthly mean fractions of pixels containing multi-layer and vertically-extended clouds for January and July 2007 at the OMI spatial resolution (l2kmx24km at nadir) and at the 5kmx5km MODIS resolution used for infrared cloud retrievals. There are seasonal variations in the spatial distribution of the different cloud types. The fraction of cloudy pixels containing distinct multi-layer cloud is a strong function of the pixel size. Globally averaged, these fractions are approximately 20% and 10% for OMI and MODIS, respectively. These fractions may be significantly higher or lower depending upon location. There is a much smaller resolution dependence for fractions of pixels containing vertically-extended clouds (approx.20% for OMI and slightly less for MODIS globally), suggesting larger spatial scales for these clouds. We also find higher fractions of vertically-extended clouds over land as compared with ocean, particularly in the tropics and summer hemisphere

Spin dynamics of the S=1/2 antiferromagnetic zig-zag ladder with anisotropy

We use exact diagonalization and the modified Lanczos method to study the finite energy and finite momentum spectral weight of the longitudinal and transverse spin excitations of the anisotropic zig-zag ladder. We find that the spin excitations form continua of gapless or gapped spinons in the different regions of the phase diagram. The results obtained are consistent with a picture previously proposed that in the anisotropic case there is a transition from a gapped regime to a gapless regime, for small interchain coupling. In this regime we find a sharp low-energy peak in the structure function for the transverse spin excitations, consistent with a finite stiffness.Comment: 17 figure

Carbon Nanotubes as Schottky Barrier Transistors

We show that carbon nanotube transistors operate as unconventional "Schottky barrier transistors", in which transistor action occurs primarily by varying the contact resistance rather than the channel conductance. Transistor characteristics are calculated for both idealized and realistic geometries, and scaling behavior is demonstrated. Our results explain a variety of experimental observations, including the quite different effects of doping and adsorbed gases. The electrode geometry is shown to be crucial for good device performance.Comment: 4 pages, 5 figures, appears in Physical Review Letter