Cyclodextrin- grafted electrospun cellulose acetate nanofibers via "Click" reaction for removal of phenanthrene

Cataloged from PDF version of article.Beta-cyclodextrin (p-CD) functionalized cellulose acetate (CA) nanofibers have been successfully prepared by combining electrospinning and "click" reaction. Initially, p-CD and electrospun CA nanofibers were modified so as to be azide-p-CD and propargyl-terminated CA nanofibers, respectively. Then, "click" reaction was performed between modified CD molecules and CA nanofibers to obtain permanent grafting of CDs onto nanofibers surface. It was observed from the SEM image that, while CA nanofibers have smooth surface, there were some irregularities and roughness at nanofibers morphology after the modification. Yet, the fibrous structure was still protected. ATR-FTIR and XPS revealed that, CD molecules were successfully grafted onto surface of CA nanofibers. The adsorption capacity of p-CD-functionalized CA (CA-CD) nanofibers was also determined by removing phenanthrene (polycyclic aromatic hydrocarbons, PAH) from its aqueous solution. Our results indicate that CA-CD nanofibers have potential to be used as molecular filters for the purpose of water purification and waste water treatment by integrating the high surface area of nanofibers with inclusion complexation property of CD molecules. (C) 2014 Elsevier B.V. A

Recapitulating cranial osteogenesis with neural crest cells in 3-D microenvironments

The experimental systems that recapitulate the complexity of native tissues and enable precise control over the microenvironment are becoming essential for the pre-clinical tests of therapeutics and tissue engineering. Here, we described a strategy to develop an in vitro platform to study the developmental biology of craniofacial osteogenesis. In this study, we directly osteo-differentiated cranial neural crest cells (CNCCs) in a 3-D in vitro bioengineered microenvironment. Cells were encapsulated in the gelatin-based photo-crosslinkable hydrogel and cultured up to three weeks. We demonstrated that this platform allows efficient differentiation of p75 positive CNCCs to cells expressing osteogenic markers corresponding to the sequential developmental phases of intramembranous ossification. During the course of culture, we observed a decrease in the expression of early osteogenic marker Runx2, while the other mature osteoblast and osteocyte markers such as Osterix, Osteocalcin, Osteopontin and Bone sialoprotein increased. We analyzed the ossification of the secreted matrix with alkaline phosphatase and quantified the newly secreted hydroxyapatite. The Field Emission Scanning Electron Microscope (FESEM) images of the bioengineered hydrogel constructs revealed the native-like osteocytes, mature osteoblasts, and cranial bone tissue morphologies with canaliculus-like intercellular connections. This platform provides a broadly applicable model system to potentially study diseases involving primarily embryonic craniofacial bone disorders, where direct diagnosis and adequate animal disease models are limited

Guided and magnetic self-assembly of tunable magnetoceptive gels

Self-assembly of components into complex functional patterns at microscale is common in nature, and used increasingly in numerous disciplines such as optoelectronics, microfabrication, sensors, tissue engineering and computation. Here, we describe the use of stable radicals to guide the self-assembly of magnetically tunable gels, which we call ‘magnetoceptive’ materials at the scale of hundreds of microns to a millimeter, each can be programmed by shape and composition, into heterogeneous complex structures. Using paramagnetism of free radicals as a driving mechanism, complex heterogeneous structures are built in the magnetic field generated by permanent magnets. The overall magnetic signature of final structure is erased via an antioxidant vitamin E, subsequent to guided self-assembly. We demonstrate unique capabilities of radicals and antioxidants in fabrication of soft systems with heterogeneity in material properties, such as porosity, elastic modulus and mass density; then in bottom-up tissue engineering and finally, levitational and selective assembly of microcomponents

Liquid-Phase Chemical Sensing Using Lateral Mode Resonant Cantilevers

Liquid-phase operation of resonant cantilevers vibrating in an out-of-plane flexural mode has to date been limited by the considerable fluid damping and the resulting low quality factors (Q factors). To reduce fluid damping in liquids and to improve the detection limit for liquid-phase sensing applications, resonant cantilever transducers vibrating in their in-plane rather than their out-of-plane flexural resonant mode have been fabricated and shown to have Q factors up to 67 in water (up to 4300 in air). In the present work, resonant cantilevers, thermally excited in an in-plane flexural mode, are investigated and applied as sensors for volatile organic compounds in water. The cantilevers are fabricated using a complementary metal oxide semiconductor (CMOS) compatible fabrication process based on bulk micromachining. The devices were coated with chemically sensitive polymers allowing for analyte sorption into the polymer. Poly(isobutylene) (PIB) and poly(ethylene-co-propylene) (EPCO) were investigated as sensitive layers with seven different analytes screened with PIB and 12 analytes tested with EPCO. Analyte concentrations in the range of 1−100 ppm have been measured in the present experiments, and detection limits in the parts per billion concentration range have been estimated for the polymer-coated cantilevers exposed to volatile organics in water. These results demonstrate significantly improved sensing properties in liquids and indicate the potential of cantilever-type mass-sensitive chemical sensors operating in their in-plane rather than out-of-plane flexural modes

Determination of Nearshore Sandbar Crest Depth Using Neural Network Approach

For the coastal structure designs, nearshore sandbars are crucial since they are affected highly from various parameters like beach slope, the height and period of the wave and the properties of the material forming the bed. In this study, it was investigated the sediment movements in nearshore by using various bar crest depths and a physical model. Erosion profile output is used for determination of the bar crest depths. Linear and non-linear regression methods are used for obtaining the non-dimensional equations with the experimental data. These equations are then compared with the ones found in the literature. Transportation of on-off shore sediments is affected by bar crest depth which has been examined with the materials forming the beach by using various diameter of the medium as d50=0.25, 0.32, 0.45, 0.62 and 0.80 mm. In order to estimate nearshore sandbar crest depth, we have developed an approach by using neural network (ANN). For proposing the efficiency of the study, ANN and multi-nonlinear regression models are compared with each other

Untethered micro-robotic coding of three-dimensional material composition

Complex functional materials with three-dimensional micro- or nano-scale dynamic compositional features are prevalent in nature. However, the generation of three-dimensional functional materials composed of both soft and rigid microstructures, each programmed by shape and composition, is still an unsolved challenge. Herein, we describe a method to code complex materials in three-dimensions with tunable structural, morphological, and chemical features using an untethered magnetic micro-robot remotely controlled by magnetic fields. This strategy allows the micro-robot to be introduced to arbitrary microfluidic environments for remote two- and three-dimensional manipulation. We demonstrate the coding of soft hydrogels, rigid copper bars, polystyrene beads, and silicon chiplets into three-dimensional heterogeneous structures. We also use coded microstructures for bottom-up tissue engineering by generating cell-encapsulating constructs

pH-responsive nanofibers with controlled drug release properties

Cataloged from PDF version of article.Smart polymers and nanofibers are potentially intriguing materials for controlled release of bioactive agents. This work describes a new class of pH responsive nanofibers for drug delivery systems with controlled release properties. Initially, poly(4-vinylbenzoic acid-co-(ar-vinylbenzyl) trimethylammonium chloride) [poly(VBA-co-VBTAC)] was synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization. Then, ciprofloxacin was chosen as the model drug for the release study and encapsulated into pH-responsive polymeric carriers of poly(VBA-co-VBTAC) nanofibers via electrospinning. The morphology of the electrospun nanofibers was examined by scanning electron microscopy (SEM). The structural characteristics of the pH responsive nanofibers were investigated by Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The release measurements of ciprofloxacin from pH responsive nanofibers were also performed by high-performance liquid chromatography (HPLC) analysis. To show the pH sensitivity of these nanofibers, the release profile of ciprofloxacin was examined under acidic, neutral and basic conditions. The results indicate that pH responsive nanofibers can serve as effective drug carriers since the release of ciprofloxacin could be controlled by changing the pH of the environment, and therefore these drug loaded pH-responsive nanofibers might have potential applications in the biomedical field. This journal is © The Royal Society of Chemistry

Geometrical Optimization of Resonant Cantilevers Vibrating in In-Plane Bending Modes

The influence of the beam geometry on the quality factor and resonance frequency of resonant silicon cantilever beams vibrating in their fundamental in-plane flexural mode has been investigated in air and water. Compared to cantilevers vibrating in their out-of-plane flexural mode, utilizing the in plane mode results in reduced damping and reduced mass loading by the surrounding fluid. Quality factors as high as 4,300 in air and 67 in water have been measured for cantilevers with a 12 μm thick silicon layer. This is in comparison to Q factors up to 1,500 in air and up to 20 in water for cantilevers vibrating in their fundamental out-of-plane bending mode. Based on the experimental data, design guidelines are established for beam dimensions that ensure maximal Q-factors and minimal mass loading by the surrounding fluid

Bioactive surface design based on functional composite electrospun nanofibers for biomolecule immobilization and biosensor applications

Cataloged from PDF version of article.The combination of nanomaterials and conducting polymers attracted remarkable attention for development of new immobilization matrices for enzymes. Hereby, an efficient surface design was investigated by modifying the graphite rod electrode surfaces with one-step electrospun nylon 6,6 nanofibers or 4% (w/w) multiwalled carbon nanotubes (MWCNTs) incorporating nylon 6,6 nanofibers (nylon 6,6/4MWCNT). High-resolution transmission electron microscopy study confirmed the successful incorporation of the MWCNTs into the nanofiber matrix for nylon 6,6/4MWCNT sample. Then, these nanofibrous surfaces were coated with a conducting polymer, (poly-4-(4,7-di(thiophen-2-yl)-1H-benzo[d]imidazol-2-yl) benzaldehyde) (PBIBA) to obtain a high electroactive surface area as new functional immobilization matrices. Due to the free aldehyde groups of the polymeric structures, a model enzyme, glucose oxidase was efficiently immobilized to the modified surfaces via covalent binding. Scanning electron microscope images confirmed that the nanofibrous structures were protected after the electrodeposition step of PBIBA and a high amount of protein attachment was successfully achieved by the help of high surface to volume ratio of electroactive nanofiber matrices. The biosensors were characterized in terms of their operational and storage stabilities and kinetic parameters (K mapp and Imax). The resulting novel glucose biosensors revealed good stability and promising Imax values (10.03 and 16.67 μA for nylon 6,6/PBIBA and nylon 6,6/4MWCNT/PBIBA modified biosensors, respectively) and long shelf life (32 and 44 days for nylon 6,6/PBIBA and nylon 6,6/4MWCNT/PBIBA modified biosensors, respectively). Finally, the biosensor was tested on beverages for glucose detection. © 2014 American Chemical Society

Smartphone-based, rapid, wide-field fundus photography for diagnosis of pediatric retinal diseases

PurposeAn important, unmet clinical need is for cost-effective, reliable, easy-to-use, and portable retinal photography to evaluate preventable causes of vision loss in children. This study presents the feasibility of a novel smartphone-based retinal imaging device tailored to imaging the pediatric fundus.MethodsSeveral modifications for children were made to our previous device, including a child-friendly 3D printed housing of animals, attention-grabbing targets, enhanced image stitching, and video-recording capabilities. Retinal photographs were obtained in children undergoing routine dilated eye examination. Experienced masked retina-specialist graders determined photograph quality and made diagnoses based on the images, which were compared to the treating clinician's diagnosis.ResultsDilated fundus photographs were acquired in 43 patients with a mean age of 6.7 years. The diagnoses included retinoblastoma, Coats' disease, commotio retinae, and optic nerve hypoplasia, among others. Mean time to acquire five standard photographs totaling 90-degree field of vision was 2.3 ± 1.1 minutes. Patients rated their experience of image acquisition favorably, with a Likert score of 4.6 ± 0.8 out of 5. There was 96% agreement between image-based diagnosis and the treating clinician's diagnosis.ConclusionsWe report a handheld smartphone-based device with modifications tailored for wide-field fundus photography in pediatric patients that can rapidly acquire fundus photos while being well-tolerated.Translational relevanceAdvances in handheld smartphone-based fundus photography devices decrease the technical barrier for image acquisition in children and may potentially increase access to ophthalmic care in communities with limited resources