Awareness of form-sound correspondence in Chinese children with dyslexia: Preliminary results from event-related potentials and time frequency analyses

Developmental dyslexia has usually been characterized as having difficulties learning grapheme-phoneme correspondence and applying the mappings. This study investigates form-sound awareness in Chinese reading-impaired children in terms of regularity, consistency and lexicality effects using event-related potentials (ERP) and time-frequency analysis (TFA). Preliminary data from two Cantonese-speaking male children, one with reading impairment (PR) and one with normal reading performance (CA), performing a character recognition task were collected. ERP results indicated that CA showed a lexicality effect at N400 that was not evident in PR. TFA showed that CA exhibited greater event-related synchronization (ERS) and phase coherence at theta and gamma bands suggesting greater cognitive demand in processing pseudo and irregular characters. An opposite pattern was observed for PR, where greater effort was needed to retrieve information related to real and regular characters whilst failing to respond to pseudo and irregular characters. Greater ERS and phase coherence was also observed for real, pseudo and regular characters at 350-450ms at theta suggesting adequate access to phonological and semantic information for CA compared to PR. Whereas PR showed greater ERS and phase coherence at earlier and later time intervals. These initial findings suggest that PR may have weaker semantic representations and may be less sensitive to the internal structure of characters and its relationship with sounds. © 2011 IEEE.published_or_final_versio

Effect of sieving on ex-situ soil respiration of soils from three land use types

This study aims to investigate the effect of sieving on ex situ soil respiration (CO2 flux) measurements from different land use types. We collected soils (0–10 cm) from arable, grassland and woodland sites, allocated them to either sieved (4-mm mesh, freshly sieved) or intact core treatments and incubated them in gas-tight jars for 40 days at 10 °C. Headspace gas was collected on days 1, 3, 17, 24, 31 and 38 and CO2 analysed. Our results showed that sieving (4 mm) did not significantly influence soil respiration measurements, probably because micro aggregates (< 0.25 mm) remain intact after sieving. However, soils collected from grassland soil released more CO2 compared with those collected from woodland and arable soils, irrespective of sieving treatments. The higher CO2 from grassland soil compared with woodland and arable soils was attributed to the differences in the water holding capacity and the quantity and stoichiometry of the organic matter between the three soils. We conclude that soils sieved prior to ex situ respiration experiments provide realistic respiration measurements. This finding lends support to soil scientists planning a sampling strategy that better represents the inhomogeneity of field conditions by pooling, homogenising and sieving samples, without fear of obtaining unrepresentative CO2 flux measurements caused by the disruption of soil architecture

Preparation of Ni–YSZ thin and thick films on metallic interconnects as cell supports. Applications as anode for SOFC

In this work, we propose the preparation of a duplex anodic layer composed of both a thin (100 nm) and a thick film (10 lm) with Ni–YSZ material. The support of this anode is a metallic substrate, which is the interconnect of the SOFC unit cell. The metallic support limits the temperature of thermal treatment at 800 C to keep a good interconnect mechanical behaviour and to reduce corrosion. We have chosen to elaborate anodic coatings by sol–gel route coupled with dip-coating process, which are low cost techniques and allow working with moderate temperatures. Thin films are obtained by dipping interconnect substrate into a sol, and thick films into an optimized slurry. After thermal treatment at only 800 C, anodic coatings are adherent and homogeneous. Thin films have compact microstructures that confer ceramic protective barrier on metal surface. Further coatings of 10 lm thick are porous and constitute the active anodic material

The influence of test experience and NK1 receptor antagonists on the performance of NK1R-/- and wildtype mice in the 5 Choice Serial Reaction Time Task

Genetically-altered mice, lacking functional NK1 receptors (NK1R-/-), express abnormal behaviours that are prominent in Attention Deficit Hyperactivity Disorder: namely, inattentiveness and impulsivity (indicated by their greater %omissions and premature responses in the 5 Choice Serial Reaction Time Task: ‘5 CSRTT’) and locomotor hyperactivity. Here, we investigated how behaviour in the 5 CSRTT is affected by repeated testing and whether the abnormalities expressed by NK1R-/- mice are mimicked by treating wildtypes with an NK1R antagonist (L 733060 or RP 67580; 5 or 10 mg/kg). Repeated testing with a variable (VITI) or fixed, prolonged (LITI) intertrial interval reduced %omissions. Premature responses also declined, but only in NK1R /- mice in the VITI test. By contrast, perseveration increased in both genotypes. RP 67580 (10 mg/kg) increased the %omissions in both genotypes in the VITI, an action which cannot be attributed to NK1R antagonism. Neither drug affected perseveration. However, for premature responses, the profile of the response suggests that the low and high doses of RP 67580 (VITI) and L 733060 (LITI) have opposing effects on this behaviour. We infer that the effect of NK1R antagonists in the 5 CSRTT is confounded by animals’ test experience and non-specific drug effects at sites other than NK1R, possibly L type Ca2+v channels

Performance Deficits of NK1 Receptor Knockout Mice in the 5-Choice Serial Reaction-Time Task: Effects of d-Amphetamine, Stress and Time of Day

Background: The neurochemical status and hyperactivity of mice lacking functional substance P-preferring NK1 receptors (NK1R-/-) resemble abnormalities in Attention Deficit Hyperactivity Disorder (ADHD). Here we tested whether NK1R-/- mice express other core features of ADHD (impulsivity and inattentiveness) and, if so, whether they are diminished by d-amphetamine, as in ADHD. Prompted by evidence that circadian rhythms are disrupted in ADHD, we also compared the performance of mice that were trained and tested in the morning or afternoon.Methods and Results: The 5-Choice Serial Reaction-Time Task (5-CSRTT) was used to evaluate the cognitive performance of NK1R-/- mice and their wildtypes. After training, animals were tested using a long (LITI) and a variable (VITI) inter-trial interval: these tests were carried out with, and without, d-amphetamine pretreatment (0.3 or 1 mg/kg i.p.). NK1R-/- mice expressed greater omissions (inattentiveness), perseveration and premature responses (impulsivity) in the 5-CSRTT. In NK1R-/- mice, perseveration in the LITI was increased by injection-stress but reduced by d-amphetamine. Omissions by NK1R-/- mice in the VITI were unaffected by d-amphetamine, but premature responses were exacerbated by this psychostimulant. Omissions in the VITI were higher, overall, in the morning than the afternoon but, in the LITI, premature responses of NK1R-/- mice were higher in the afternoon than the morning.Conclusion: In addition to locomotor hyperactivity, NK1R-/- mice express inattentiveness, perseveration and impulsivity in the 5-CSRTT, thereby matching core criteria for a model of ADHD. Because d-amphetamine reduced perseveration in NK1R-/- mice, this action does not require functional NK1R. However, the lack of any improvement of omissions and premature responses in NK1R-/- mice given d-amphetamine suggests that beneficial effects of this psychostimulant in other rodent models, and ADHD patients, need functional NK1R. Finally, our results reveal experimental variables (stimulus parameters, stress and time of day) that could influence translational studies

Elucidating the Limit of Li Insertion into the Spinel Li4Ti5O12

In this work, we show that the well-known lithium-ion anode material, Li4Ti5O12, exhibits exceptionally high initial capacity of 310 mAh g-1 when it is discharged to 0.01 V. It maintains a reversible capacity of 230 mAh g-1, far exceeding the "theoretical" capacity of 175 mAh g-1 when this anode is lithiated to the composition Li7Ti5O12. Neutron diffraction analyses identify that additional Li reversibly enters into the Li7Ti5O12 to form Li8Ti5O12. density functional theory (DFT) calculations reveal the average potentials of the Li4Ti5O12 to Li7Ti5O12 step and the Li7Ti5O12 to Li8Ti5O12 step are 1.57 and 0.19 V, respectively, which are in excellent agreement with experimental results. Transmission electron microscopy (TEM) studies confirm that the irreversible capacity of Li4Ti5O12 during its first cycle originates from the formation of a solid electrolyte interface (SEI) layer. This work clarifies the fundamental lithiation mechanism of the Li4Ti5O12, when lithiated to 0.01 V vs Li

Mechanical properties of Ti-6Al-4V selectively laser melted parts with body-centred-cubic lattices of varying cell size

Significant weight savings in parts can be made through the use of additive manufacture (AM), a process which enables the construction of more complex geometries, such as functionally graded lattices, than can be achieved conventionally. The existing framework describing the mechanical properties of lattices places strong emphasis on one property, the relative density of the repeating cells, but there are other properties to consider if lattices are to be used effectively. In this work, we explore the effects of cell size and number of cells, attempting to construct more complete models for the mechanical performance of lattices. This was achieved by examining the modulus and ultimate tensile strength of latticed tensile specimens with a range of unit cell sizes and fixed relative density. Understanding how these mechanical properties depend upon the lattice design variables is crucial for the development of design tools, such as finite element methods, that deliver the best performance from AM latticed parts. We observed significant reductions in modulus and strength with increasing cell size, and these reductions cannot be explained by increasing strut porosity as has previously been suggested. We obtained power law relationships for the mechanical properties of the latticed specimens as a function of cell size, which are similar in form to the existing laws for the relative density dependence. These can be used to predict the properties of latticed column structures comprised of body-centred-cubic (BCC) cells, and may also be adapted for other part geometries. In addition, we propose a novel way to analyse the tensile modulus data, which considers a relative lattice cell size rather than an absolute size. This may lead to more general models for the mechanical properties of lattice structures, applicable to parts of varying size

Preparation, structural characterisation and antibacterial properties of Ga-doped sol-gel phosphate-based glass

A sol-gel preparation of Ga-doped phosphate-based glass with potential application in antimicrobial devices has been developed. Samples of composition (CaO)(0.30)(Na2O)(0.20-x) (Ga2O3) (x) (P2O5)(0.50) where x = 0 and 0.03 were prepared, and the structure and properties of the gallium-doped sample compared with those of the sample containing no gallium. Analysis of the P-31 MAS NMR data demonstrated that addition of gallium to the sol-gel reaction increases the connectivity of the phosphate network at the expense of hydroxyl groups. This premise is supported by the results of the elemental analysis, which showed that the gallium-free sample contains significantly more hydrogen and by FTIR spectroscopy, which revealed a higher concentration of -OH groups in that sample. Ga K-edge extended X-ray absorption fine structure and X-ray absorption near-edge structure data revealed that the gallium ions are coordinated by six oxygen atoms. In agreement with the X-ray absorption data, the high-energy XRD results also suggest that the Ga3+ ions are octahedrally coordinated with respect to oxygen. Antimicrobial studies demonstrated that the sample containing Ga3+ ions had significant activity against Staphylococcus aureus compared to the control

Emergent dynamic chirality in a thermally driven artificial spin ratchet

Modern nanofabrication techniques have opened the possibility to create novel functional materials, whose properties transcend those of their constituent elements. In particular, tuning the magnetostatic interactions in geometrically frustrated arrangements of nanoelements called artificial spin ice1, 2 can lead to specific collective behaviour3, including emergent magnetic monopoles4, 5, charge screening6, 7 and transport8, 9, as well as magnonic response10, 11, 12. Here, we demonstrate a spin-ice-based active material in which energy is converted into unidirectional dynamics. Using X-ray photoemission electron microscopy we show that the collective rotation of the average magnetization proceeds in a unique sense during thermal relaxation. Our simulations demonstrate that this emergent chiral behaviour is driven by the topology of the magnetostatic field at the edges of the nanomagnet array, resulting in an asymmetric energy landscape. In addition, a bias field can be used to modify the sense of rotation of the average magnetization. This opens the possibility of implementing a magnetic Brownian ratchet13, 14, which may find applications in novel nanoscale devices, such as magnetic nanomotors, actuators, sensors or memory cells

Quantum corrections and black hole spectroscopy

In the work \cite{BRM,RBE}, black hole spectroscopy has been successfully reproduced in the tunneling picture. As a result, the derived entropy spectrum of black hole in different gravity (including Einstein's gravity, Einstein-Gauss-Bonnet gravity and Ho\v{r}ava-Lifshitz gravity) are all evenly spaced, sharing the same forms as $S_n=n$, where physical process is only confined in the semiclassical framework. However, the real physical picture should go beyond the semiclassical approximation. In this case, the physical quantities would undergo higher-order quantum corrections, whose effect on different gravity shares in different forms. Motivated by these facts, in this paper we aim to observe how quantum corrections affect black hole spectroscopy in different gravity. The result shows that, in the presence of higher-order quantum corrections, black hole spectroscopy in different gravity still shares the same form as $S_n=n$, further confirming the entropy quantum is universal in the sense that it is not only independent of black hole parameters, but also independent of higher-order quantum corrections. This is a desiring result for the forthcoming quantum gravity theory.Comment: 14 pages, no figure, use JHEP3.cls. to be published in JHE